Pair these male snap halves with female snap halves to make a complete snap.

Kits include a hand punch tool with die and six complete snaps.

Once installed, these fasteners provide a male snap half on both sides of your fabric. Create a complete snap by joining each male side with a female snap half for a finished look on assembled layers of fabric.

Pair with a female snap half to create a complete snap.

The threaded stud installs in threaded holes.

Fasten these male snap halves to a solid surface when you only have access to one side. A blind rivet tool is required for installation.

Use screws to secure these bases in a solid surface.

Also known as slam rivets, the two heads provide a finished look on both sides of your material.

The washer creates a large holding surface on the back of the material. Also known as belt rivets, these are used for fastening conveyor belts or leather. A special setting tool and a hammer are required for installation.

Stainless steel snap-in nuts have excellent corrosion resistance in most environments.

Create fast connections with items, such as rope, chain, and straps.

Squeeze the trigger to quickly release the latch.

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

Lock the bolt with wire or a cable tie for a secure connection.

To open, lift and twist the latch 90°.

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

For extra security, these have a latch that snaps back into place to secure your load.

Keep metal snap-in plugs of various sizes on hand to solve whatever problems arise. Made of steel, these plugs are our most durable plugs for panels. Their tapered prongs snap into holes to securely hold them in place.

Squeeze the adjustable handle to install standard and dual-sided fabric snaps and fabric grommets.

Set solid rivets using one of these tools and your hammer.