About Paint and Protective Coatings
More
Metal Hand-Pump Sprayers
Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.
Style A, B, and C sprayers have a trigger that locks for continuous spray.
Style A sprayers have a filter in the tank to prevent clogs.
Style C sprayers are more impact resistant than other sprayers and have a reinforced hose to prevent cracking and leaking. They can be used with harsh liquids such as acetone (40%).
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Sprayers | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Fill Opening | Repair Kits | Replacement Trigger and Wand Kits | ||||||||||||||||
| Style | Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Color | Hose Lg. | Wand Lg. | Wd. | Dp. | Dia. | Includes | Each | Each | Each | |||
Mist/Stream Dispensing | ||||||||||||||||||
| A | 2 | 8" | 18" | Epoxy-Coated Galvanized Steel | Viton® Fluoroelastomer Rubber | Blue | 42" | 12" | __ | __ | 3" | __ | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 000000 |
| A | 3 | 8" | 23" | Epoxy-Coated Galvanized Steel | Viton® Fluoroelastomer Rubber | Blue | 42" | 18" | __ | __ | 5" | __ | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
Cone/Flat/Stream Dispensing | ||||||||||||||||||
| B | 2 | 8" | 17 1/2" | Stainless Steel | Viton® Fluoroelastomer Rubber | __ | 40" | 12" | __ | __ | 5 1/4" | __ | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| B | 3 | 8" | 20" | Stainless Steel | Viton® Fluoroelastomer Rubber | __ | 40" | 18" | __ | __ | 5 1/4" | Shoulder Strap | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
Flat Dispensing | ||||||||||||||||||
| C | 3 1/2 | 8 1/2" | 26 3/4" | Epoxy-Coated Steel | Viton® Fluoroelastomer Rubber | Red | 48" | 24" | __ | __ | 4 1/4" | Two Spray Nozzles | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| C | 3 1/2 | 9 1/2" | 27 1/4" | Stainless Steel | Viton® Fluoroelastomer Rubber | __ | 48" | 24" | 4" | 1 1/2" | __ | __ | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
| D | 3 1/2 | 8" | 26 1/2" | Epoxy-Coated Galvanized Steel | Viton® Fluoroelastomer Rubber | Black | 48" | 24" | 4 1/4" | 2 1/2" | __ | __ | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
Mobile Hand-Pump Sprayers
Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.
Replacement trigger and wand kits do not include nozzles.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Small-Capacity Air-Powered Sprayers
Spray thin liquids evenly with just one hand. These compact sprayers don’t need propellant—fill them and pressurize with air.
Aluminum sprayers weigh less and are more corrosion resistant than steel sprayers, but they’re not as strong.
Steel sprayers are stronger than aluminum sprayers, but they’re heavier. They have a scratch-resistant powder coating that helps prevent corrosion from chemicals and moisture.
PTFE seals handle a broader range of chemicals than Viton® seals. They’re also more wear resistant.
Sprayers with a pressure-relief valve let you release the air inside, so you can open them safely without being sprayed. Face the valve away from you, then slowly turn it counterclockwise until you hear air escape.
Plastic pitchers (sold separately) have a nozzle that fits into the sprayer opening. A removable brass filter strains out foreign particles.
Sprayers | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Air Inlet | Repair Kits | |||||||||||||||
| Cap., fl. oz. | Dispensing Type | Dia. | Ht. | Seal Material | Color | Pressure Range, psi | Thread Size | Thread Type | Gender | Features | Includes | Each | Each | |||
For Use With Water-Based Liquids | ||||||||||||||||
Powder-Coated Aluminum | ||||||||||||||||
| A | 16 | Mist, Stream | 3" | 9 1/4" | Viton® Fluoroelastomer Rubber | Red | 80-145 | 0.305"-32 | Schrader | Male | __ | Eight Mist Nozzles, One Pin-Stream Nozzle | 000000 | 000000 | 0000000 | 000000 |
Nickel-Plated Aluminum | ||||||||||||||||
| A | 16 | Mist, Stream | 3" | 9 1/4" | Viton® Fluoroelastomer Rubber | __ | 80-145 | 0.305"-32 | Schrader | Male | __ | Eight Mist Nozzles, One Pin-Stream Nozzle | 000000 | 00000 | 0000000 | 00000 |
For Use With Oil and Solvents | ||||||||||||||||
Powder-Coated Steel | ||||||||||||||||
| B | 32 | Mist, Stream | 4" | 8" | PTFE Plastic | Red | 80-145 | 0.305"-32 | Schrader | Male | __ | __ | 0000000 | 00000 | 0000000 | 00000 |
| C | 32 | Mist, Stream | 4" | 8" | PTFE Plastic | Green | 80-145 | 0.305"-32 | Schrader | Male | Pressure-Relief Valve | __ | 00000000 | 00000 | 0000000 | 00000 |
For Use With Water-Based Liquids, Oil, and Solvents | ||||||||||||||||
Painted Aluminum | ||||||||||||||||
| D | 24 | Mist, Stream | 3 1/2" | 11" | PTFE Plastic | Black | 80-145 | 0.305"-32 | Schrader | Male | __ | __ | 00000000 | 00000 | 0000000 | 00000 |
Nickel-Plated Aluminum | ||||||||||||||||
| D | 24 | Mist, Stream | 3 1/2" | 11" | PTFE Plastic | __ | 80-145 | 0.305"-32 | Schrader | Male | __ | __ | 00000000 | 00000 | 0000000 | 00000 |
| 32-fl. oz. Plastic Pitcher | 0000000 | Each | 000000 |
Air-Powered Sprayers
Spray liquids without stopping to pump—these sprayers pressurize with compressed air. Keep them connected to your air supply for long periods of spraying, or disconnect them for up to 10 minutes of untethered use. A flat nozzle on the wand makes it easy to cover wide areas or coat large surfaces. The wand also has a trigger that locks for continuous spray, helping reduce hand fatigue.
You can monitor the pressure in the tank with the pressure gauge; a built-in pressure regulator will automatically keep it below the maximum. Lower the pressure as needed using the pressure relief valve. Fill the tank no more than three-quarters full before pressurizing.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Sprayers | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Air Inlet | Replacement Trigger and Wand Kits | ||||||||||||||||||
| Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Wand Material | Hose Lg., ft. | Wand Lg. | Fill Opening Dia. | Graduation Marks | Pressure Range, psi | Pipe Size | Thread Type | Gender | Features | Includes | Each | Each | ||
Flat Dispensing | |||||||||||||||||||
| 6 1/2 | 11 13/16" | 34" | Powder-Coated Steel | Buna-N Rubber | Stainless Steel | 25 | 24" | 1" | 2 L | 44-102 | 1/4 | NPT | Male | Coiled Hose, Continuous Spray, Internal Pressure Regulator, Pressure Gauge, Pressure Relief Valve, Two Rubber Wheels, Wand Holder | Funnel | 00000000 | 0000000 | 00000000 | 000000 |
| 10 1/2 | 11 13/16" | 40" | Powder-Coated Steel | Buna-N Rubber | Stainless Steel | 25 | 24" | 1" | __ | 44-72 | 1/4 | NPT | Male | Coiled Hose, Continuous Spray, Internal Pressure Regulator, Pressure Gauge, Pressure Relief Valve, Two Rubber Wheels, Wand Holder | Funnel | 00000000 | 000000 | 00000000 | 00000 |
Light Duty Air-Powered Paint Sprayers
These economical siphon-feed spray guns use suction to draw thin-to-medium liquid out of a container.
Style A changes from siphon to pressure feed for thick paint and coatings.
Style B provides a finer finish than Style C.
Air Inlet | Fluid Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Feed Type | Tip Diameter | Cup Cap., oz. | Material | Air Consumption | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | For Use With | Features | Nozzle Material | Each | |
| Siphon, Pressure | 0.047" | 32 | Aluminum | 1.5 cfm @ 40 psi | 1/4 | NPS | Male | 3/8 | NPS | Male | Dye, Lacquer, Solvent-Based Paint and Coatings, Stain, Water-Based Paint and Coatings | Adjustable Spray Pattern | Aluminum | 0000000 | 000000 |
Air Inlet | Fluid Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Feed Type | Tip Diameter | Cup Cap., oz. | Material | Nozzle Material | Air Consumption | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | For Use With | Features | Each | |
| Siphon | 0.07" | 8 | Nickel Plated Steel | Nickel Plated Steel | 2 cfm @ 40 psi | 1/4 | NPS | Male | 3/8 | NPS | Male | Dye, Lacquer, Solvent-Based Paint and Coatings, Stain, Water-Based Paint and Coatings | Adjustable Spray Pattern | 00000000 | 000000 |
| Siphon | 0.07" | 32 | Aluminum | Black-Oxide Steel | 7 cfm @ 40 psi | 1/4 | NPS | Male | 3/8 | NPS | Male | Dye, Lacquer, Solvent-Based Paint and Coatings, Stain, Water-Based Paint and Coatings | Adjustable Spray Pattern | 000000 | 000000 |
High-Volume/Low-Pressure Air-Powered Paint Sprayers
Minimize waste of paint and coatings—these sprayers produce less overspray than our other air-powered sprayers.
Air Inlet | Fluid Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Feed Type | Tip Diameter | Cup Cap., oz. | Material | Nozzle Material | Air Consumption | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | For Use With | Features | Each | |
| Siphon | 0.09" | 32 | Aluminum | Stainless Steel | 11.2 cfm @ 30 psi | 1/4 | NPS | Male | 3/8 | NPS | Male | Dye, Epoxy, Lacquer, Solvent-Based Paint and Coatings, Stain, Water-Based Paint and Coatings | Adjustable Spray Pattern | 00000000 | 0000000 |
Air Inlet | Fluid Inlet | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Feed Type | Tip Diameter | Cup Cap., oz. | Material | Nozzle Material | Air Consumption | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | For Use With | Features | Includes | Each | |
| Gravity | 0.06" | 23 | Aluminum | Stainless Steel | 14.4 cfm @ 29 psi | 1/4 | NPS | Male | 3/8 | NPS | Male | Dye, Lacquer, Solvent-Based Paint and Coatings, Stain, Water-Based Paint and Coatings | Adjustable Spray Pattern | 3M Adapter | 000000 | 0000000 |
Heavy Duty Air-Powered Paint Sprayers
Tackle high-volume projects while achieving a fine finish. These sprayers can switch from siphon-feed to pressure-feed for thick paint.
Air Inlet | Fluid Inlet | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Feed Type | Tip Diameter | Material | Nozzle Material | Air Consumption | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | For Use With | Features | Each | |
| Siphon, Pressure | 0.07" | Aluminum | Stainless Steel | 14.2 cfm @ 30 psi | 1/4 | NPS | Male | 3/8 | NPS | Male | Adhesives, Dye, Epoxy, Lacquer, Polyurethane, Solvent-Based Paint and Coatings, Stain, Water-Based Paint and Coatings | Adjustable Spray Pattern | 000000 | 0000000 |
Air Inlet | Fluid Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Feed Type | Tip Diameter | Cup Cap., oz. | Material | Nozzle Material | Air Consumption | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | For Use With | Features | Each | |
| Siphon, Pressure | 0.07" | 32 | Aluminum | Stainless Steel | 7.9 cfm @ 30 psi | 1/4 | NPS | Male | 3/8 | NPS | Male | Dye, Epoxy, Lacquer, Polyurethane, Solvent-Based Paint and Coatings, Stain, Water-Based Paint and Coatings | Adjustable Spray Pattern | 000000 | 0000000 |
ASME-Code Pressurized Tanks for Air-Powered Paint Sprayers
These tanks are built to ASME specifications. Use them with your paint sprayer for high-volume application of paint and coatings.
Stainless steel tank is more corrosion resistant than the zinc-plated steel tank.
Tanks | Replacement Cover Gaskets | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Cap., gal. | Max. Pressure, psi | Ht. | Dia. | Handle Ht. | Features | Includes | Each | Each | ||
| Zinc-Plated Steel | 2.8 | 80 | 10 1/2" | 10 1/8" | 10" | Cover with Gasket, Pressure Regulator with Gauge, Safety Relief Valve | Yoke Assembly | 0000000 | 000000000 | 0000000 | 000000 |
| Stainless Steel | 2.8 | 110 | 14" | 10 1/8" | 7" | Cover with Gasket, Pressure Regulator with Gauge, Safety Relief Valve | Air Manifold, Fluid Valve | 0000000 | 00000000 | 0000000 | 000000 |
| Plastic Liner (Pkg. of 1) | 0000000 | Pkg. | 00000 |
| Includes | Each | |
| Air Hose with 1/4 NPS Female Connection (25 ft.) Fluid Hose with 3/8 NPS Female Connection (25 ft.) | 0000000 | 0000000 |
| Component | Each | |
| Pressure Regulator | 0000000 | 0000000 |
Pressurized Tanks for Air-Powered Paint Sprayers
Attach one of these large-capacity tanks to your paint sprayer for high-volume application of paint and coatings.
| Material | Cap., qt. | Max. Pressure, psi | Ht. | Dia. | Handle Ht. | Hose Lg., ft. | Features | Includes | Each | |
| Aluminum | 2 | 50 | 10" | 5" | 10" | 6 | Cover with Gasket, Pressure Regulator with Gauge, Safety Relief Valve | Air Hose with 1/4 NPS Male Connection (6 ft.), Fluid Hose with 3/8 NPS Male Connection (6 ft.), Lid Gasket, Pressure Regulator, Tank Lid | 000000 | 0000000 |
| Includes | Each | |
| Air Hose with 1/4 NPS Female Connection (25 ft.) Fluid Hose with 3/8 NPS Female Connection (25 ft.) | 0000000 | 0000000 |
Aluminum Cups for Air-Powered Paint Sprayers
Powder Coating Sprayers
Good for small jobs and frequent color changes, these sprayers have small containers and adjustable controls that make switching between jobs easy. To make color changes faster, keep multiple sets of the cups or tanks, couplings, and tubing (all sold separately) on hand to reduce the components you need to clean between colors.
Sprayers with a 2 lb. tank hold more powder than sprayers with an 8 oz. cup. For a smooth, even coat on flat surfaces, the tank uses compressed air to circulate powder, preventing spitting and surging. Because you can adjust the output voltage in increments, these sprayers are good for a wide variety of applications, from small parts to large objects such as furniture, enclosures, and guardrails. They also come with different nozzles, so you can change the size, shape, and speed of your spray depending on your surface.
Output voltage is the amount of electrical charge applied to the powder coating. Lower voltages are good for intricate details and hard-to-reach corners and crevices. Higher voltages are good for quickly coating large, flat surfaces.
Air Pressure, psi | Air Inlet | Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Output Voltage | Output Voltage Adjustment Increment | Tank | Sprayer | Air Consumption | Pipe Size | Thread Type | Gender | Tube Lg., ft. | Operating Voltage | Ht. | Wd. | Dp. | Includes | Each | |
| 0kV DC-99kV DC | 0.1kV | 0-50 | 0-50 | 6 cfm @ 50 psi | 1/4 | NPT | Female | 13 | 120V AC | 14 1/2" | 9" | 1 1/2" | One Mist Nozzle, Seven Cone Nozzles | 00000000 | 000000000 |
| Weight Cap., lbs. | Material | Each | |
| 2 | Stainless Steel | 00000000 | 000000 |
| For Tube ID | Material | Each | |
| 11 mm | Nylon Plastic | 00000000 | 000000 |
| ID | Lg., ft. | Material | Each | |
| 11 mm | 13 | Vinyl Plastic | 00000000 | 000000 |