Material Material |
|---|
|
Clamp-On Framing Component Clamp-On FramingComponent |
|---|
 |  |
| Rail | Through-Hole Connector |
 |  |
| Rail End | Mounting Foot |
 |  |
| Panel Hanger | Conveyor Rail |
 |  |
| Conveyor Rail Mounting Bracket | Monitor Mount |
 | |
| Rail Support |
Finish Finish |
|---|
|
Framing Type Framing Type |
|---|
|
Clamp-On Framing Component Shape Clamp-On FramingComponent Shape |
|---|
|
Conveyor Rail Bracket Type Conveyor Rail Bracket Type |
|---|
|
Mounting Foot Type Mounting Foot Type |
|---|
|
Clamp-On Framing and Fittings
Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations. Clamp fittings onto the rail and tighten the included cap screw and nut. For permanent connections and added strength, fittings have a 5/32" hole; drill a matching hole in the rail and secure with a fastener (not included).
For technical drawings and 3-D models, click on a part number.
Through-hole fittings allow rails to run all the way through.
Swivel tee has plastic bushings that allows the rail to rotate inside the fitting.
| Clamp-On Framing Component Shape | For Rail OD | No. of Through Holes | Material | Each | |
| Closed Tee | 1.08" | 1 | Black-Painted Steel | 0000000 | 00000 |
| Open Tee | 1.08" | 1 | Black-Painted Steel | 0000000 | 0000 |
| Three-Way 90° Elbow | 1.08" | 1 | Black-Painted Steel | 0000000 | 0000 |
| Swivel Tee | 1.08" | 1 | Black-Painted Steel | 0000000 | 0000 |
| Cross | 1.08" | 1 | Black-Painted Steel | 0000000 | 0000 |
| Five-Way Cross | 1.08" | 1 | Black-Painted Steel | 0000000 | 0000 |
| Six-Way Cross | 1.08" | 1 | Black-Painted Steel | 0000000 | 00000 |
| Crossover | 1.08" | 2 | Black-Painted Steel | 0000000 | 0000 |
| 45° Wye | 1.08" | 1 | Black-Painted Steel | 0000000 | 0000 |
| Adjustable-Angle Wye | 1.08" | 1 | Black-Painted Steel | 0000000 | 0000 |
| Clamp-On Framing Component Shape | For Rail OD | For Max. Panel Thick. | No. of Through Holes | Material | Each | |
| Straight | 1.08" | 1/2" | 1 | Black-Painted Steel | 0000000 | 00000 |
Monitor mount has a VESA (Video Electronics Standards Association) standard mounting hole pattern.
| For Rail OD | Material | Each | |
| 1.08" | Black-Painted Steel | 0000000 | 000000 |
Rail end attaches to a rail on one end and has a flange on the other end to attach to floors, walls, and ceilings.
Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|
| Clamp-On Framing Component Shape | For Rail OD | Flange Dia. | Material | No. of | Dia. | Mounting Fasteners Included | Each | |
| Round Flange | 1.08" | 3 1/2" | Black-Painted Steel | 3 | 5/16" | No | 0000000 | 00000 |
Rail support secures long runs of railing.
| Clamp-On Framing Component Shape | For Rail OD | No. of Through Holes | Material | Each | |
| Straight | 1.08" | 2 | Black-Painted Steel | 0000000 | 00000 |
Flow-through conveyor rail mounting bracket is for use on the loading side of the conveyor rail.
Recessed-stop conveyor rail mounting bracket is for use on the picking side of the conveyor rail.
Leveling mounting foot has a 16 mm thread and a bushing for attaching to rails and structures. It also has an open slot in the base for anchoring.
| Mounting Foot Type | For Rail OD | Dia. | Capacity, lbs. | Material | Mounting Fasteners Included | Each | |
| Leveling | 1.08" | 3 1/8" | 200 | Steel | Yes | 0000000 | 000000 |
Heavy Duty Clamp-On Framing and Fittings
Thick construction makes this framing strong and sturdy. This system has a secure clamping mechanism to hold heavy loads—no machining or welding required. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations. Clamp fittings onto the rail and tighten the included hex head screws.
For technical drawings and 3-D models, click on a part number.
Aluminum Slip-On Framing and Fittings
Half the weight of steel, this aluminum framing resists corrosion in wet environments. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Tighten the included set screws for a secure hold.
For technical drawings and 3-D models, click on a part number.
Yellow-painted aluminum rail offers high visibility.
| Rail OD | Wall Thick. | Schedule | 2 ft. | 3 ft. | 4 ft. | 5 ft. | 6 ft. | 7 ft. | 8 ft. | 9 ft. | 10 ft. | |
Aluminum | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1" | 0.113" | 40 | 0000000 | |||||||||
| 1 1/4" | 0.133" | 40 | 0000000 | |||||||||
| 1 5/8" | 0.14" | 40 | 0000000 | |||||||||
| 1 7/8" | 0.145" | 40 | 0000000 | |||||||||
| 2 3/8" | 0.154" | 40 | 0000000 | |||||||||
Yellow-Painted Aluminum | ||||||||||||
| 1" | 0.113" | 40 | 0000000 | |||||||||
| 1 1/4" | 0.133" | 40 | 0000000 | |||||||||
| 1 5/8" | 0.14" | 40 | 0000000 | |||||||||
| 1 7/8" | 0.145" | 40 | 0000000 | |||||||||
| 2 3/8" | 0.154" | 40 | 0000000 | |||||||||
Galvanized Iron and Steel Slip-On Framing and Fittings
To provide corrosion resistance in wet environments, this framing is galvanized. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Tighten the included set screws for a secure hold.
For technical drawings and 3-D models, click on a part number.
Stainless Steel Slip-On Framing and Fittings
Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving.
For technical drawings and 3-D models, click on a part number.
Telescoping Weld-Together Rails
Create posts of varying lengths. To telescope rails, slide one length of rail into the next larger size rail (for example, a 1 3/4" height rail fits into a 2" height rail and a 3/4" dia. rail fits into a 1" dia. rail). Weld the rails together at the desired length to create strong structures. These rails are not compatible with weld-together framing and fittings.
Carbon steel rails are lightly oiled.
Aluminum rails are about half the weight of steel and resist corrosion in wet environments.
304 stainless steel rails are more corrosion resistant than galvanized carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Flush-Fit Framing and Fittings
Flush connections between rails and fittings give structures a clean finished look. Use this framing for stair rails, work platforms, and workstations. Slide the rail over a fitting and tighten the included set screw—the fitting grips the rail from the inside.
For technical drawings and 3-D models, click on a part number.
