Component Component |
|---|
 |  |
| Buckle | Slide |
 |  |
| Hook | Ring |
 | |
| Finishing Tip |
Buckle Type Buckle Type |
|---|
 | Cam |
 | Ratchet |
 | Flip Lock |
 | Feed Through |
 | Spring- Loaded Clamp |
 | Hinged Bar |
 | Slide Bar |
 | Squeeze Release |
Material Material |
|---|
|
Finish Finish |
|---|
|
Capacity Capacity |
|---|
|
Load Securement Type Load Securement Type |
|---|
 |  |
| Tie Down | Anchor Point |
Width Width |
|---|
|
|
|
Length Length |
|---|
|
|
|
Load-Rated Sew-On Buckles for Webbing
Permanently sew webbing onto the buckles to create high-tension tie down straps.
Feed-through buckles are easy to cinch. Lift the buckle to release.
Flip-lock buckles, also known as over-center buckles, tighten by flipping the lever-style buckle.
Cam buckles tighten fast. Pull the strap through to tighten; lift the cam to release.
Ratchet buckles tighten incrementally for maximum tension.
Stainless steel fittings are more corrosion resistant than zinc-plated steel fittings.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| For Max. Webbing Wd. | Capacity, lbs. | Wd. | Lg. | Each | |
Feed Through | |||||
|---|---|---|---|---|---|
Stainless Steel | |||||
| 1" | 500 | __ | __ | 0000000 | 00000 |
Flip Lock | |||||
Zinc-Plated Steel | |||||
| 1" | 330 | 1 1/2" | 3 3/4" | 0000000 | 0000 |
| 2" | 500 | 2 3/4" | 5 1/8" | 0000000 | 0000 |
Stainless Steel | |||||
| 1" | 260 | 1 1/2" | 3 5/8" | 0000000 | 00000 |
| 2" | 500 | 2 11/16" | 7 1/8" | 0000000 | 00000 |
Cam | |||||
Zinc-Plated Steel | |||||
| 1" | 400 | 1 1/2" | 2 1/2" | 0000000 | 0000 |
| 2" | 830 | 2 7/16" | 2 15/16" | 0000000 | 00000 |
Stainless Steel | |||||
| 1" | 100 | __ | __ | 0000000 | 0000 |
Ratchet | |||||
Zinc-Plated Steel | |||||
| 1" | 500 | 2 1/16" | 4 7/16" | 000000 | 0000 |
| 2" | 3,670 | 4 3/16" | 7 5/8" | 0000000 | 00000 |
Stainless Steel | |||||
| 1" | 350 | 2" | 4 1/2" | 0000000 | 00000 |
| 1 1/2" | 1,320 | 3 1/16" | 5 7/8" | 0000000 | 00000 |
| 2" | 1,670 | 3 1/2" | 6 9/16" | 0000000 | 00000 |
Load-Rated No-Sew Buckles for Webbing
Attach webbing to these buckles without sewing.
Ratchet buckles tighten incrementally for maximum tension. They have a hook on one end so you can secure them to an anchor point. Thread webbing through the other end.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| For Max. Webbing Wd. | Capacity, lbs. | Wd. | Lg. | Hook Opening Wd. | Each | |
Ratchet | ||||||
|---|---|---|---|---|---|---|
Zinc-Plated Steel | ||||||
| 2" | 3,670 | 4 3/16" | 10 1/2" | 1 1/4" | 0000000 | 000000 |
Light Duty Sew-On Buckles for Webbing
Sew webbing onto these buckles for use as light duty straps on backpacks and bags.
Hinged-bar buckles hold tight upon cinching; push down on the buckle to release.
Squeeze-release buckles quickly release with one hand.
Spring-loaded clamp buckles have a spring and gripping teeth to hold webbing tight. Push down on the clamp to release.
Slide-bar buckles have a movable center bar for quick cinching.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| For Max. Webbing Wd. | Wd. | Lg. | Pkg. Qty. | Pkg. | |
Hinged Bar | |||||
|---|---|---|---|---|---|
Nickel-Plated Steel | |||||
| 1 1/2" | 2 1/16" | 2" | 1 | 0000000 | 00000 |
| 2" | 2 1/2" | 2 5/16" | 1 | 0000000 | 0000 |
Squeeze Release | |||||
Aluminum | |||||
| 3/4" | 1" | 2" | 1 | 0000000 | 0000 |
| 1" | 1 5/16" | 2 1/2" | 1 | 0000000 | 0000 |
| 1 1/2" | 1 13/16" | 2 11/16" | 1 | 0000000 | 0000 |
| 2" | 2 3/8" | 2 11/16" | 1 | 0000000 | 0000 |
Spring-Loaded Clamp | |||||
Nickel-Plated Steel | |||||
| 1" | 1 3/8" | 2 7/16" | 1 | 0000000 | 0000 |
Slide Bar | |||||
Nickel-Plated Steel | |||||
| 3/4" | 1" | 1 1/8" | 5 | 0000000 | 0000 |
| 1" | 1 1/4" | 1 3/8" | 5 | 0000000 | 0000 |
Load-Rated Slides for Webbing
These slides are rated for heavy duty applications. To make an adjustable strap, thread webbing through both ends or sew it onto one end.
Stainless steel fittings are more corrosion resistant than zinc-plated steel fittings.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Light Duty Slides for Webbing
Add a slide to webbing to make adjustable straps. Either thread webbing through both ends or sew it onto one end.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Slip-On Hooks for Webbing
Use the split in the hook to slide an eye on and off these fittings.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Hook | ||||||
|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Capacity, lbs. | Opening Wd. | Lg. | Color | Each | |
Wire Hook | ||||||
Plastic-Coated Steel | ||||||
| 2" | 1,000 | 1 1/4" | 3 7/16" | Black | 00000000 | 00000 |
Sew-On Hooks for Webbing
Sew webbing onto these hooks for a permanent attachment point.
Plastic-coated hooks are nonmarring. Stainless steel fittings are more corrosion resistant than zinc-plated steel fittings.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Hook | ||||||
|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Capacity, lbs. | Opening Wd. | Lg. | Color | Each | |
Flat Hook | ||||||
Zinc-Plated Steel | ||||||
| 1" | 600 | 5/16" | 2" | __ | 0000000 | 00000 |
| 2" | 1,660 | 5/8" | 3 1/16" | __ | 0000000 | 0000 |
Stainless Steel | ||||||
| 1" | 350 | 1/4" | 1 1/16" | __ | 0000000 | 0000 |
| 1 1/2" | 1,000 | 5/8" | 2 13/16" | __ | 0000000 | 0000 |
| 2" | 1,500 | 5/8" | 2 13/16" | __ | 0000000 | 00000 |
Wire Hook | ||||||
Zinc-Plated Steel | ||||||
| 1" | 660 | 1 1/8" | 2 1/2" | __ | 0000000 | 0000 |
| 2" | 830 | 7/16" | 1 11/16" | __ | 0000000 | 0000 |
Stainless Steel | ||||||
| 1" | 400 | 3/4" | 2 3/4" | __ | 0000000 | 0000 |
| 1 1/2" | 1,000 | 3/4" | 3 7/16" | __ | 0000000 | 0000 |
| 2" | 1,500 | 3/4" | 3 7/16" | __ | 0000000 | 00000 |
S-Hook | ||||||
Zinc-Plated Steel | ||||||
| 1" | 400 | 1 1/8" | 4 11/16" | __ | 0000000 | 0000 |
| 2" | 330 | 2" | 6 3/16" | __ | 0000000 | 00000 |
Plastic-Coated Steel | ||||||
| 1" | 500 | 1 1/8" | 4 5/8" | Black | 0000000 | 0000 |
Stainless Steel | ||||||
| 1" | 200 | 1" | 4" | __ | 0000000 | 0000 |
| 1 1/2" | 300 | 1 1/2" | 4 1/2" | __ | 0000000 | 0000 |
| 2" | 400 | 2 1/4" | 6 3/16" | __ | 0000000 | 00000 |
Latch Hook | ||||||
Zinc-Plated Steel | ||||||
| 1" | 1,830 | 1/2" | 3 3/4" | __ | 0000000 | 0000 |
| 2" | 2,100 | 1" | 4 1/4" | __ | 0000000 | 0000 |
Stainless Steel | ||||||
| 2" | 1,670 | 1" | 6" | __ | 0000000 | 00000 |
Rings for Webbing
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| For Max. Webbing Wd. | Capacity, lbs. | Thick. | Inner Ring Lg. | Pkg. Qty. | Pkg. | |
Round Ring | ||||||
|---|---|---|---|---|---|---|
Nickel Plated Steel | ||||||
| 1/2" | Not Rated | 1/8" | __ | 10 | 000000 | 00000 |
| 5/8" | Not Rated | 1/8" | __ | 10 | 000000 | 0000 |
| 3/4" | Not Rated | 1/8" | __ | 10 | 000000 | 0000 |
| 7/8" | Not Rated | 5/32" | __ | 10 | 000000 | 0000 |
| 1" | Not Rated | 5/32" | __ | 10 | 000000 | 0000 |
| 1 1/4" | Not Rated | 3/16" | __ | 10 | 000000 | 0000 |
D-Ring | ||||||
Nickel Plated Steel | ||||||
| 1" | 200 | 7/32" | 13/16" | 10 | 0000000 | 0000 |
| 1 1/4" | 200 | 1/4" | 1 1/8" | 10 | 0000000 | 0000 |
| 1 1/2" | 200 | 1/4" | 1 1/2" | 10 | 0000000 | 00000 |
| 2" | 200 | 1/4" | 1 3/4" | 10 | 0000000 | 00000 |
Zinc Plated Steel | ||||||
| 2" | 1,660 | 1/4" | 1 11/16" | 1 | 0000000 | 0000 |
Stainless Steel | ||||||
| 1 1/2" | 400 | 3/16" | 1 1/2" | 1 | 00000000 | 0000 |
| 2" | 400 | 3/16" | 2" | 1 | 00000000 | 0000 |
| 2" | 780 | 1/4" | 2 1/8" | 1 | 00000000 | 0000 |
| 2 1/2" | 1,200 | 5/16" | 2 3/8" | 1 | 00000000 | 0000 |
| 3" | 1,200 | 5/16" | 2 5/8" | 1 | 00000000 | 0000 |
Delta Ring | ||||||
Zinc Plated Steel | ||||||
| 1" | 1,670 | 1/4" | 1 5/16" | 1 | 0000000 | 0000 |
Finishing Tips for Webbing
Webbing Anchor Plates
Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.
Zinc-plated steel plates have mild corrosion resistance.
18-8 stainless steel plates have good corrosion resistance.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Capacity, lbs. | Lg. | Wd. | Mounting Fasteners Included | No. of | Dia. | Each | |
Zinc-Plated Steel | ||||||||
| 1" | 330 | 2 1/16" | 1 9/16" | No | 1 | 1/2" | 0000000 | 00000 |
| 1 3/4" | 5,000 | 2 7/8" | 2 3/8" | No | 1 | 25/32" | 0000000 | 00000 |
| 2" | 1,000 | 1 7/8" | 2 3/4" | No | 1 | 1/2" | 0000000 | 0000 |
18-8 Stainless Steel | ||||||||
| 1" | 500 | 2 1/16" | 1 9/16" | No | 1 | 1/2" | 0000000 | 00000 |
| 1 3/4" | 3,900 | 2 7/8" | 2 3/8" | No | 1 | 25/32" | 0000000 | 00000 |
No-Sew Hooks with Quick-Tight Buckles
Quickly increase and release tension with the cam buckle on these hooks. They grip webbing tightly so there's no need to sew webbing on. Webbing is sold separately.
Warning: Never use for lifting applications.