An anodized coating on these U-channels forms a bond with the aluminum surface to improve wear and corrosion resistance.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

With welded ends, these short lengths of strut channel provide a finished look when mounting clamps and accessories to machines and surfaces.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

This welded, one-piece strut channel combines two strut channels back-to-back.

Push these nuts into place rather than threading them onto a fastener.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

Keep a rod securely centered against the strut channel.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

Use with hex nuts to connect threaded rod.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Brackets mount on the outside of strut channel to allow trolley movement.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

This nylon-coated stainless steel trim combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges. It can also protect wire, cable, and hose.

Designed to withstand temperatures up to 800° F, this stainless steel trim is good for use with ovens, boilers, and heat shields. It combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges.

Adjust supports to the exact height you need to route pipe, conduit, and tubing through strut-mount routing clamps and hangers.