These sheets and bars are precision ground either on all six sides or just on the top and bottom.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

Also known as flat stock, these sheets and bars are precision ground on the top and bottom.

Sometimes called flat stock, these bars have a thickness and width that are precision ground to a tight tolerance.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into low-strength fasteners, pins, and axles.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as frames, supports, and edge protectors.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Weld these steel triangles to strengthen joints in structural applications.

Easy to forge, grind, and heat treat, these 1084 high-carbon steel bars offer high strength and resist wear and abrasion.

The nickel and molybdenum content gives AR400 carbon steel the ability to resist wear better than all other carbon steel. It's often used as wear strips, liners, and deflector plates.

Even in low temperatures, A516 carbon steel resists breaking upon impact. Also known as pressure-vessel-quality (PVQ) steel, it is mostly used for boilers, storage tanks, and pressure vessels.

Made with vanadium, this alloy steel retains its strength at temperatures up to 1100° F.

Also known as flat stock, the thickness on these sheets and bars is held to a tight tolerance.

The surface of these bars is hardened to increase their resistance to impacts and abrasion. Also known as chrome-moly steel, which is used to create molds, structural supports, and other parts.

The thickness is oversized for finishing to your exact requirements.

A low carbon content makes this 4130 alloy steel easy to weld. Also known as chrome-moly steel, it’s often used for pressure vessels and structural supports.

Made from 4130 alloy steel, also known as chrome-moly steel, these rods have low carbon content for good weldability. They’re often used to make gears and bushings.

Easier to machine than 52100 alloy steel rods, these extremely hard and wear-resistant tubes are often used to create bearings, bushings, and other cylindrical parts that are under constant stress. They’re also known as chrome steel.

Made of 4340 alloy steel, these sheets hold up to high heat, hard impacts, and heavy wear thanks to high levels of nickel, chromium, and molybdenum.

Also known as W- and WF-beams, H-bars have wide flanges for strength. Made of alloy steel, they’re often used in machine bases, platforms, and frames.

Made of 8620 alloy steel, these sheets have low levels of carbon that make them easy to weld. High nickel, chromium, and molybdenum content make them resistant to wear.

A vacuum arc remelting (VAR) casting process gives 9310 superior strength, hardness, and fatigue resistance over other types of alloy steel. It's often machined into heavy duty gears, clutch parts, and ratchets.

When it’s exposed to the elements, this steel forms a thin shell of rust that shields the interior from corrosion. It’s also known as weathering steel.

Made of a chromium-nickel-molybdenum alloy and strengthened with vanadium, this steel is the strongest alloy we offer.

Also known as Nitriding 135, this steel can be hardened at lower temperatures than other heat-treatable alloys.

5160 alloy steel handles repeated cycles of stress without breaking just like spring steel. It’s often used to make flat springs.

Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

Offering outstanding resistance to surface wear and corrosion, Nitronic 60 stainless steel is often used for shafts, fasteners, and valves.

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

2205 stainless steel resists cracking even when faced with a combination of tensile stress, corrosive chemicals, and heat. Also known as duplex stainless steel, it has twice the strength of 316 stainless steel. Use it for high-pressure applications in caustic environments.

Hardened for improved strength and wear resistance, these rods are precision ground to a strict diameter tolerance. Use them for turning applications in your lathe.

This material is hardened for improved strength and wear resistance.

One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.

Precision ground on the top and bottom to a tight tolerance.

The addition of vanadium and carbon gives 420V stainless steel excellent wear resistance. It can replace tool steel in highly abrasive applications.

With excellent strength and wear resistance, S30V stainless steel is a preferred material for knives and cutlery.

309/310 stainless steel has high levels of chromium and nickel to provide good corrosion resistance at elevated temperatures. It's often used in heat exchangers and furnaces.

Often used to make bearings and couplings in tough transportation, oil- and gas-drilling, and marine industries, these rods resist fatigue and corrosion. Also known as ToughMet™ 3 rods.

With an oversized diameter, these rods and discs let you finish to your exact requirements.

An oversized diameter allows for finishing to your exact requirements.

With an oversized thickness, length, and width, these bars can be finished to your exact requirements.

Ready for turning in a lathe, these precision-ground rods have a tight diameter tolerance and are held to a strict straightness tolerance.

These bars are precision ground to a tight thickness tolerance.

Made from powdered metal, M4 tool steel has a consistent microstructure that gives it outstanding resistance to wear and abrasion. It is comparable to CPM Rex M4.

The thickness on these bars is precision ground to a tight tolerance.

All set for turning in your lathe, these precision-ground rods are held to a strict straightness tolerance.

These W1 bars have lower amounts of alloy elements than other tool steels for excellent machinability.

The diameter on these rods is precision ground while the straightness is held to a strict tolerance, so they're ready for turning in a lathe.

The thickness on these bars is precision ground to a tight tolerance.

Oversized for finishing to your exact requirements.

Resistant to wear, abrasion, and chipping, A11 is a hard material that is often made into punches and stamping tools.