Designed for use with misting systems, these coolants have excellent cooling properties for intermittent machine cycles when milling and turning.

For use with micro-drop dispensers, these coolants are mixed with air to create small, controlled droplets that dissipate heat and are easy to clean up. Use for small jobs.

An alternative to nearly dry machining, apply these coolants to tools before milling and machining to reduce heat with minimal cleanup. They’re often used for shallow drilling, reaming, and tapping, as well as on saw blades.

Increase the time between coolant changes—wear-resistant properties allow these coolants to perform longer than standard grinding coolants. They prevent material from building up to ensure a high-quality finish and preserve tool life.

These coolants won’t react with or stain soft metal, such as aluminum or copper. They remove heat, prevent workpiece corrosion and distortion, and improve accuracy while cutting.

These coolants prevent material buildup on smoothing and sharpening stones. They are water-based, so they’re easy to clean from workpieces.

Weld longer without damaging your torch—replace the water in your welding cooler with these coolants to prevent mineral deposits and frozen lines. Coolants also tolerate colder temperatures than water. For use with MIG, TIG, spot, and stud welders. They are nonconductive.

Also known as plumber's lard oil, these light-colored lubricants are chlorine and sulfur free, so they won't stain soft metal, such as aluminum or copper. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier.

For use in food-processing and preparation areas, these lubricants are NSF registered H1 for incidental food contact. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

Use these lubricants for easier and faster tapping, cutting, and threading of hard and thick material. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

Formulated for use on soft metal, such as aluminum, copper, and brass, these lubricants won’t stain. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

Use this high-purity mineral oil to lubricate smoothing and sharpening stones and to prevent material buildup.

Add these liquids to your machine-tool reservoir to reduce foam in coolant systems and keep them running smoothly.

Chemically neutralize and eliminate harmful acidic or alkaline gases, such as hydrogen sulfide and ammonia. These deodorizers are often used in machine coolant, cutting fluids, wastewater, and trash collection areas.