For Use On For Use On |
|---|
For Joining For Joining |
|---|
|
Manufacturer Model Number Manufacturer Model Number |
|---|
|
Color Color |
|---|
 | Light Yellow |
 | Gray |
Consistency Consistency |
|---|
|
Peel Strength Peel Strength |
|---|
|
Shear Strength Shear Strength |
|---|
|
Approximate Coverage Approximate Coverage |
|---|
|
About Structural Adhesives
More
Toughened Acrylic Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Plastic Welder II bonds dissimilar materials.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Devcon Adhesives | |||||||||||||
| Plastic Welder | 1 | Syringe | 4 min. | 24 hrs. | 3,000 | 35 | 1:1 | Thick Liquid (55,000 cP) | -65° to 250° | Light Yellow | Metal, Plastic, Composites, Masonry, Wood | 00000000 | 000000 |
| Plastic Welder | 1.58 | Cartridge | 4 min. | 24 hrs. | 3,000 | 35 | 1:1 | Thick Liquid (55,000 cP) | -65° to 250° | Light Yellow | Metal, Plastic, Composites, Masonry, Wood | 00000000 | 00000 |
| Plastic Welder II | 1.58 | Cartridge | 15 min. | 24 hrs. | 3,000 | 15 | 1:1 | Thick Liquid (55,000 cP) | -65° to 250° | Light Yellow | Metal, Metal to Plastic, Plastic, Plastic to Composites, Plastic to Masonry, Composites, Masonry, Wood | 00000000 | 00000 |
Acrylic Structural Adhesives
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
IT194 is nonsagging, so it won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Plexus Adhesives | |||||||||||||
| IT194 | 1.18 | Cartridge | 4 min. | 24 hrs. | 2,000 | 30 | 10:1 | Gel (96,140 cP) | -40° to 180° | Gray | Metal, Plastic, Rubber, Composites, Masonry, Wood | 00000000 | 000000 |