McMaster-Carr

Search Results

	System of Measurement System of Measurement

Metric

Inch

	Thickness Thickness

	Width Width

	Material Material

	Shape Shape


Sheet and Bar	Rod and Disc

Hex Bar

	Tolerance Rating Tolerance Rating

Standard

Tight

Undersized

	Temper Temper

T651

T6511

Not Rated

	Aluminum Performance Properties Aluminum Performance Properties

Easy to Machine

Corrosion Resistant

Easy to Weld

	Fabrication Fabrication

	Yield Strength Yield Strength

	Heat Treatable Heat Treatable

Yes

	Heat Treatment Heat Treatment

Hardened

Stress Relieved

	Elongation Elongation

11%

12.5%

	Diameter Diameter

	Length Length

	Hardness Rating Hardness Rating

Soft

Medium

	Hardness Hardness

	Specifications Met Specifications Met

ASTM B221

ASTM B209

ASTM B211

	Comparable To Comparable To

	Minimum Temperature Minimum Temperature

-320Â° F

Not Rated

	Maximum Temperature Maximum Temperature

View catalog pages (10)

Forward

How can we improve?

197 Products

About Aluminum

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

Extruded sheets and bars are formed by a die for close-tolerance widths, then cut to the lengths listed.

Metric Bars

Yield Strength: 35,000 psi
Hardness: Brinell 95 (Soft)
Temper: T6
Fabrication: See table
Specifications Met: ASTM B221

2 mm Thick. (-0.152 to 0.152 mm Tolerance)
Wd., mm	Fabrication	Heat Treatment	Temperature Range, Â°F	Flatness Tolerance		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
5	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00	00000	00000
10	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00	0000	0000
15	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00	0000	0000
20	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00000	0000	0000
25	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
30	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
40	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
3 mm Thick. (-0.152 to 0.152 mm Tolerance)
5	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00	0000	0000
10	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00	0000	0000
15	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
20	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
25	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
30	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
40	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
4 mm Thick. (-0.178 to 0.178 mm Tolerance)
5	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00	0000	0000
10	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
15	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
20	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
25	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
30	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
40	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
5 mm Thick. (-0.178 to 0.178 mm Tolerance)
5	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00	0000	0000
10	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
15	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
20	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
25	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
30	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
40	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
6 mm Thick. (-0.178 to 0.178 mm Tolerance)
6	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
10	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
15	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
20	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
25	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
30	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
40	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
8 mm Thick. (-0.203 to 0.203 mm Tolerance)
8	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	0000
10	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
15	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
20	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
25	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
30	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
40	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
10 mm Thick. (-0.203 to 0.203 mm Tolerance)
10	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	0000	00000
15	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
20	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
25	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
30	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
40	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	0000	00000	00000
20 mm Thick. (-0.254 to 0.254 mm Tolerance)
20	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00000	00000	00000
30	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00000	00000	00000
25 mm Thick. (-0.254 to 0.254 mm Tolerance)
25	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00000	00000	00000
50	Extruded	Hardened	-320Â° to 300Â°	0.006" per in.	0000000	00000	00000	00000

Tight-Tolerance Multipurpose 6061
Aluminum Sheets and Bars with Certification

Yield Strength: 35,000 psi
Hardness: Brinell 95 (Soft)
Temper: See table
Fabrication: See table
Specifications Met: ASTM B209

These sheets and bars are precision ground either on all six sides or just on the top and bottom. Each piece comes with a traceable lot number and test report. The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

Sheets and bars that are precision ground on top and bottom are also known as flat stock.

Precision Ground on Top and Bottom
Thick., mm	Thick. Tolerance, mm	Fabrication	Temper	Heat Treatment	Temperature Range, Â°F		Each
2" x 12"
6.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
8.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
10.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
15.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
20.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
25.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
30.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
2" x 24"
6.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
8.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
10.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
15.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
20.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
25.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
30.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
4" x 12"
6.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
8.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
10.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
15.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
20.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
25.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
30.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
4" x 24"
6.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
8.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
10.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
15.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
20.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
25.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
30.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
6" x 6"
6.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
8.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
10.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
15.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
20.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
25.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
30.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
6" x 12"
6.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
8.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000
10.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
15.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
20.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
25.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
30.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
6" x 24"
6.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
8.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
10.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
15.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
20.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
25.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
30.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
12" x 12"
6.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
8.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
10.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
15.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
20.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
25.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
30.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
12" x 24"
6.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
8.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
10.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
15.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
20.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
25.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
30.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
24" x 24"
6.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
8.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
10.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
15.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
20.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	000000
25.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000000
30.000	-0.050 to 0.050	Cold Rolled	T651	Hardened	-320Â° to 300Â°	00000000	00000000

Multipurpose 6061 Aluminum Hex Bars

Yield Strength: 35,000 psi
Hardness: Brinell 95 (Soft)
Temper: See table
Fabrication: See table
Specifications Met:
Extruded: ASTM B221
Cold Drawn: ASTM B211

For technical drawings and 3-D models, click on a part number.

Wd., mm	Wd. Tolerance, mm	Fabrication	Temper	Heat Treatment	Temperature Range, Â°F	Straightness Tolerance		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
5	-0.230 to 0.230	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	00000	00000	00000
6	-0.230 to 0.230	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	0000	0000	0000
7	-0.230 to 0.230	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	0000	0000	0000
8	-0.230 to 0.230	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	0000	0000	0000
10	-0.230 to 0.230	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	0000	0000	00000
12	-0.230 to 0.230	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	0000	0000	00000
14	-0.230 to 0.230	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	0000	00000	00000
16	-0.230 to 0.230	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	0000	00000	00000
18	-0.230 to 0.230	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	0000	00000	00000
20	-0.310 to 0.310	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	00000	00000	00000
25	-0.310 to 0.310	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	00000	00000	00000
30	-0.310 to 0.310	Extruded	T6	Hardened	-320Â° to 300Â°	0.0125" per ft.	0000000	00000	00000	00000

Tight-Tolerance Multipurpose 6061 Aluminum Rods

Yield Strength: 35,000 psi
Hardness:
Inch sizes: Not Rated
Metric sizes: Brinell 95 (Soft)
Temper:
Extruded: T6511
Cold Worked: T6
Fabrication: See table
Specifications Met:
Extruded: ASTM B221
Cold Worked: ASTM B211

Precision ground and held to a strict straightness tolerance, these rods are all set for turning applications in your lathe. The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

Dia., mm	Dia. Tolerance, mm	Fabrication	Heat Treatment	Mechanical Finish	Temperature Range, Â°F	Straightness Tolerance		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
4	-0.013 to 0.013	Cold Worked	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	000000	000000
5	-0.013 to 0.013	Cold Worked	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	00000	00000
6	-0.013 to 0.013	Cold Worked	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	00000	00000
8	-0.013 to 0.013	Extruded	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	00000	00000
10	-0.013 to 0.013	Extruded	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	00000	00000
12	-0.013 to 0.013	Extruded	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	00000	00000
15	-0.013 to 0.013	Extruded	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	00000	00000
20	-0.013 to 0.013	Extruded	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	00000	00000
25	-0.013 to 0.013	Extruded	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	00000	000000
30	-0.013 to 0.013	Extruded	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	00000	000000
40	-0.013 to 0.013	Extruded	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	000000	000000
50	-0.013 to 0.013	Extruded	Hardened	Precision Ground	-320Â° to 300Â°	0.021" per ft.	0000000	00000	000000	000000

Tight-Tolerance High-Strength 7075 Aluminum Rods

Yield Strength: 73,000 psi
Hardness: Brinell 150 (Medium)
Temper: T6
Fabrication: Cold Worked
Specifications Met: ASTM B211

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance. Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because itâ€™s stronger and provides similar performance in all other aspects.

Dia.	Dia. Tolerance	Heat Treatment	Temperature Range, Â°F	Straightness Tolerance		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
4mm	-0.0127mm to 0.0000mm	Hardened	-320Â° to 210Â°	0.005" per ft.	0000000	000000	000000	000000
5mm	-0.0127mm to 0.0000mm	Hardened	-320Â° to 210Â°	0.005" per ft.	0000000	00000	00000	00000
6mm	-0.0127mm to 0.0000mm	Hardened	-320Â° to 210Â°	0.005" per ft.	0000000	00000	00000	00000
8mm	-0.0127mm to 0.0000mm	Hardened	-320Â° to 210Â°	0.005" per ft.	0000000	00000	00000	00000
10mm	-0.0127mm to 0.0000mm	Hardened	-320Â° to 210Â°	0.005" per ft.	0000000	00000	00000	00000
12mm	-0.0127mm to 0.0000mm	Hardened	-320Â° to 210Â°	0.005" per ft.	0000000	00000	00000	00000
15mm	-0.0127mm to 0.0000mm	Hardened	-320Â° to 210Â°	0.005" per ft.	0000000	00000	00000	00000
20mm	-0.0127mm to 0.0000mm	Hardened	-320Â° to 210Â°	0.005" per ft.	0000000	00000	00000	000000
25mm	-0.0127mm to 0.0000mm	Hardened	-320Â° to 210Â°	0.005" per ft.	0000000	00000	000000	000000
30mm	-0.0127mm to 0.0000mm	Hardened	-320Â° to 210Â°	0.005" per ft.	0000000	00000	000000	000000
40mm	-0.0127mm to 0.0000mm	Hardened	-320Â° to 210Â°	0.005" per ft.	0000000	00000	000000	000000

Porous Mold-Quality Metapor Aluminum

Yield Strength: Not Rated
Hardness: Shore D80 (Soft)
Temper: Not Rated
Fabrication: Cast

Create molds for vacuum-forming and thermoforming applications. Metapor aluminum is porous to let air and moisture escape, which prevents bubbles and blemishes. These sheets must be milled to expose the pores; average pore diameter is 0.0006â€ with a total porosity of 15%.

Thick., mm	Thick. Tolerance, mm	Porosity	Pore Dia,		150 mm Ã— 150 mm	250 mm Ã— 250 mm	500 mm Ã— 500 mm
10	-2 to 2	15%	0.0006"	0000000	000000	0000000	0000000
15	-2 to 2	15%	0.0006"	0000000	000000	000000	000000
30	-2 to 2	15%	0.0006"	0000000	000000	000000	00000000
50	-2 to 2	15%	0.0006"	0000000	000000	000000	00000000

Easy-to-Machine MIC6 Cast Aluminum Sheets and Bars

Yield Strength: 15,000 psi
Hardness: Brinell 65 (Soft)
Temper: Not Rated
Fabrication: Cast

MIC6 is cast from a high-strength 7000-series aluminum, then stress relieved to maintain dimensional stability during high-speed machining. Use these sheets and bars for CNC routing tables, assembly jigs, vacuum chucks, and other applications where consistent flatness and tight tolerances are critical.

6" Ã— 6"
Thick., mm	Thick. Tolerance, mm	Heat Treatment	Flatness Tolerance		Each
6	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
10	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
15	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
20	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
25	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
30	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
6" Ã— 12"
6	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
10	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
15	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
20	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
25	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
30	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
6" Ã— 24"
6	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
10	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
15	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
20	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
25	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
30	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
12" Ã— 12"
6	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
10	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
15	-0.127 to 0.127	Stress Relieved	0.015"	0000000	00000
20	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
25	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
30	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
12" Ã— 24"
6	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
10	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
15	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
20	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
25	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
30	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
24" Ã— 24"
6	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
10	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
15	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
20	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
25	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000
30	-0.127 to 0.127	Stress Relieved	0.015"	0000000	000000

Terms and Conditions and Privacy Policy

About Aluminum

Multipurpose 6061 Aluminum Sheets and Bars

Tight-Tolerance Multipurpose 6061Aluminum Sheets and Bars with Certification

Multipurpose 6061 Aluminum Hex Bars

Tight-Tolerance Multipurpose 6061 Aluminum Rods

Tight-Tolerance High-Strength 7075 Aluminum Rods

Porous Mold-Quality Metapor Aluminum

Easy-to-Machine MIC6 Cast Aluminum Sheets and Bars

Tight-Tolerance Multipurpose 6061
Aluminum Sheets and Bars with Certification