Filter by
For Use With
Specifications Met
Shaft Diameter
Seal OD
Width
Seal ID
Maximum Temperature
Hardness Rating
Hardness
Cross Section Shape
Diaphragm Material
Manufacturer/Brand Equivalent
Seat Material
Seat OD
Gasket Material
RoHS
Minimum Temperature
Color
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Spring Material
Washer Material
Heavy Duty Mechanical Pump Shaft Seals
 |
Multiple internal springs ensure these seals keep the sealing surfaces in contact in demanding applications, such as agricultural, chemical, and mining pumps. Seals come furnished as two pieces—the seal and the seat. The seal is comprised of the case, springs, diaphragm, and washer, and the seat is comprised of the seat and the gasket. Seal Width represents the working height, which is the compressed length when installed.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
Cannot Be Sold Outside North America—Products cannot be sold outside North America due to restrictions.
Seal | Seat | Material | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Mfr./Brand Equiv. | ID | OD | Wd. | ID | OD | Wd. | Washer | Seat | Max. Pressure, psi | Cannot Be Sold To | Each | |||
316 Stainless Steel Case and 316 Stainless Steel Spring with Viton® Fluoroelastomer Diaphragm and Viton® Fluoroelastomer Gasket | |||||||||||||||
| 5/8" | John Crane Type 8T Pac-Seal Type 8T | 0.625" | 1.062" | 0.937" | 0.661" | 1.250" | 0.406" | Carbon | Ceramic | 300 | Outside North America | 1563N11 | 0000000 | ||
| 3/4" | John Crane Type 8T Pac-Seal Type 8T | 0.750" | 1.187" | 0.937" | 0.781" | 1.375" | 0.406" | Carbon | Ceramic | 300 | Outside North America | 1563N12 | 000000 | ||
| 1" | John Crane Type 8T Pac-Seal Type 8T | 1.000" | 1.437" | 1.000" | 1.064" | 1.625" | 0.437" | Carbon | Ceramic | 300 | Outside North America | 1563N13 | 000000 | ||
| 1 1/4" | John Crane Type 8T Pac-Seal Type 8T | 1.250" | 1.687" | 1.000" | 1.281" | 1.875" | 0.437" | Carbon | Ceramic | 300 | Outside North America | 1563N14 | 000000 | ||
| 1 1/2" | John Crane Type 8T Pac-Seal Type 8T | 1.500" | 1.937" | 1.125" | 1.546" | 2.125" | 0.437" | Carbon | Silicon Carbide | 300 | Outside North America | 1563N16 | 00000000 | ||
Water-Resistant Soft Neoprene Cord Stock
 |
Softer and easier to compress than standard neoprene cord stock, this cord stock forms a better seal on uneven surfaces. However, it’s less wear resistant. It resists moisture, salt water, and UV rays, so it's a good choice for marine environments. Since it has better chemical resistance than EPDM cord stock, it’s also used to seal tank hatches and gate valves.
Per Ft. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Wd. Tolerance Range | Hardness | ARPM Tolerance | Specs. Met | Temp. Range, ° F | Color | Choose a Length, ft. | 1-99 | 100-Up | ||
| 0.070" | -0.014" to 0.014" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K51 | 00000 | 00000 | |
| 0.093" | -0.014" to 0.014" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K74 | 0000 | 0000 | |
| 0.103" | -0.016" to 0.016" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K53 | 0000 | 0000 | |
| 0.125" | -0.016" to 0.016" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K75 | 0000 | 0000 | |
| 0.139" | -0.016" to 0.016" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K55 | 0000 | 0000 | |
| 0.187" | -0.020" to 0.020" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K76 | 0000 | 0000 | |
| 0.210" | -0.020" to 0.020" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K57 | 0000 | 0000 | |
| 0.250" | -0.020" to 0.020" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K77 | 0000 | 0000 | |
| 0.275" | -0.027" to 0.027" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K59 | 0000 | 0000 | |
| 0.313" | -0.027" to 0.027" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K61 | 0000 | 0000 | |
| 0.375" | -0.027" to 0.027" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K63 | 0000 | 0000 | |
| 0.437" | -0.031" to 0.031" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K65 | 0000 | 0000 | |
| 0.500" | -0.031" to 0.031" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K67 | 0000 | 0000 | |
| 0.625" | -0.031" to 0.031" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K69 | 0000 | 0000 | |
| 0.750" | -0.039" to 0.039" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K71 | 0000 | 0000 | |
| 1.000" | -0.051" to 0.051" | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K73 | 00000 | 0000 | |
| 2.000 mm | -0.350 mm to 0.350 mm | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K78 | 0000 | 0000 | |
| 3.000 mm | -0.400 mm to 0.400 mm | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K79 | 0000 | 0000 | |
| 4.000 mm | -0.400 mm to 0.400 mm | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K81 | 0000 | 0000 | |
| 5.000 mm | -0.500 mm to 0.500 mm | Durometer 50A (Soft) | E2 Precision | ASTM D2000 | -30 to 212 | Black | 3, 10, 20, 50, 100 | 1430K82 | 0000 | 0000 | |
Mechanical Pump Shaft Seals with Extended Spring
 |
Seal with Conical Spring |
 |
Seal with Retainer and Straight Spring |
For use in waste water, boiler feed, and compressor pumps, these seals have an extra-long spring that accommodates variations in seal cavity length. They come furnished as two pieces—the seal and the seat. The seal is comprised of the case, spring, diaphragm, and washer, which come locked together as one piece. Seal Width represents the working height, which is the compressed length when installed. The seat is comprised of the seat and the gasket.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
Viton® Fluoroelastomer Diaphragm—Viton® fluoroelastomer diaphragms resist a wider range of chemicals than Buna-N.
Viton® Fluoroelastomer Gasket—Viton® fluoroelastomer gaskets resist a wider range of chemicals than Buna-N.
Carbon Washer—Carbon washers are for use with clean liquids.
Silicon Carbide Washer—Silicon carbide washers have a hard surface that resists scratching, so they can be used with liquids that contain abrasives.
Cannot Be Sold Outside North America—Products cannot be sold outside North America due to restrictions.
Seal | Seat | Material | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Mfr. Equiv. No. | Mfr./Brand Equiv. | ID | OD | Wd. | ID | OD | Wd. | Washer | Seat | Spring Shape | Includes | Max. Pressure, psi | Cannot Be Sold To | Each | |||
304 Stainless Steel Case and 304 Stainless Steel Spring with Viton® Fluoroelastomer Diaphragm and Viton® Fluoroelastomer Gasket | ||||||||||||||||||
| 1/2" | 168V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 0.500" | 0.915" | 0.812" | 0.535" | 1.000" | 0.312" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K66 | 000000 | ||
| 5/8" | 359V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 0.625" | 1.180" | 0.875" | 0.671" | 1.250" | 0.406" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K69 | 00000 | ||
| 5/8" | 359VSC | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 0.625" | 1.180" | 0.875" | 0.671" | 1.250" | 0.406" | Silicon Carbide | Silicon Carbide | Straight | Spring Retainer | 250 | Outside North America | 9281K281 | 00000 | ||
| 3/4" | 358V, 750V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 0.750" | 1.302" | 0.875" | 0.780" | 1.375" | 0.406" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K283 | 00000 | ||
| 3/4" | 877V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 0.750" | 1.302" | 0.797" | 0.780" | 1.375" | 0.406" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K71 | 00000 | ||
| 7/8" | 309VSC | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 0.875" | 1.422" | 0.937" | 0.921" | 1.500" | 0.406" | Silicon Carbide | Silicon Carbide | Straight | Spring Retainer | 250 | Outside North America | 9281K243 | 00000 | ||
| 7/8" | 703V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 0.875" | 1.422" | 0.937" | 0.921" | 1.500" | 0.406" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K72 | 00000 | ||
| 1" | 235V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.000" | 1.552" | 1.000" | 1.031" | 1.625" | 0.437" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K73 | 00000 | ||
| 1" | 235VSC | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.000" | 1.552" | 1.000" | 1.031" | 1.625" | 0.437" | Silicon Carbide | Silicon Carbide | Straight | Spring Retainer | 250 | Outside North America | 9281K244 | 00000 | ||
| 1" | 245V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.000" | 1.700" | 1.000" | 1.031" | 1.625" | 0.437" | Carbon | Ceramic | Cone | — | 150 | Outside North America | 9281K127 | 00000 | ||
| 1 1/8" | 356V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.125" | 1.753" | 1.062" | 1.161" | 1.750" | 0.437" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K74 | 00000 | ||
| 1 1/8" | 356VSC | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.125" | 1.753" | 1.062" | 1.156" | 1.750" | 0.437" | Silicon Carbide | Silicon Carbide | Straight | Spring Retainer | 250 | Outside North America | 9281K284 | 000000 | ||
| 1 1/4" | 185V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.250" | 1.878" | 1.062" | 1.291" | 1.875" | 0.437" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K342 | 00000 | ||
| 1 1/4" | 185VSC | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.250" | 1.878" | 1.062" | 1.291" | 1.875" | 0.437" | Silicon Carbide | Silicon Carbide | Straight | Spring Retainer | 250 | Outside North America | 9281K245 | 000000 | ||
| 1 3/8" | 177V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.375" | 2.001" | 1.125" | 1.411" | 2.000" | 0.437" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K76 | 00000 | ||
| 1 3/8" | 177VSC | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.375" | 2.001" | 1.125" | 1.415" | 2.000" | 0.437" | Silicon Carbide | Silicon Carbide | Straight | Spring Retainer | 250 | Outside North America | 9281K246 | 000000 | ||
| 1 1/2" | 758V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.500" | 2.124" | 1.125" | 1.546" | 2.125" | 0.437" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K77 | 00000 | ||
| 1 1/2" | 758VSC | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.500" | 2.124" | 1.125" | 1.546" | 2.125" | 0.437" | Silicon Carbide | Silicon Carbide | Straight | Spring Retainer | 250 | Outside North America | 9281K247 | 000000 | ||
| 1 1/2" | 11558V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.500" | 2.320" | 1.093" | 1.546" | 2.125" | 0.437" | Carbon | Ceramic | Cone | — | 250 | Outside North America | 9281K78 | 00000 | ||
| 1 5/8" | 238V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.625" | 2.424" | 1.375" | 1.663" | 2.375" | 0.500" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K79 | 00000 | ||
| 1 5/8" | 238VXFX | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.625" | 2.424" | 1.375" | 1.671" | 2.375" | 0.500" | Silicon Carbide | Silicon Carbide | Straight | Spring Retainer | 250 | Outside North America | 9281K248 | 000000 | ||
| 1 3/4" | 237V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.750" | 2.446" | 1.375" | 1.796" | 2.500" | 0.500" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K8 | 00000 | ||
| 1 3/4" | 237VSC | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.750" | 2.446" | 1.375" | 1.796" | 2.500" | 0.500" | Silicon Carbide | Silicon Carbide | Straight | Spring Retainer | 250 | Outside North America | 9281K249 | 000000 | ||
| 1 7/8" | 340V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 1.875" | 2.519" | 1.500" | 1.927" | 2.625" | 0.500" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K81 | 000000 | ||
| 2" | 267V | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 2.000" | 2.724" | 1.500" | 2.055" | 2.750" | 0.500" | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K83 | 000000 | ||
| 12 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 12.000 mm | 23.500 mm | 20.500 mm | 14.700 mm | 25.500 mm | 8.000 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K349 | 00000 | ||
| 13 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 13.000 mm | 23.500 mm | 20.500 mm | 14.700 mm | 25.500 mm | 8.000 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K368 | 00000 | ||
| 15 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 15.000 mm | 27.000 mm | 22.250 mm | 17.100 mm | 31.750 mm | 10.250 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K381 | 00000 | ||
| 16 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 16.000 mm | 27.000 mm | 22.250 mm | 17.100 mm | 31.750 mm | 10.250 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K382 | 00000 | ||
| 17 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 17.000 mm | 27.000 mm | 22.250 mm | 19.700 mm | 35.000 mm | 10.250 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K395 | 00000 | ||
| 20 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 20.000 mm | 33.400 mm | 23.750 mm | 23.900 mm | 38.000 mm | 10.250 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K414 | 00000 | ||
| 22 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 22.000 mm | 33.400 mm | 23.750 mm | 23.900 mm | 38.000 mm | 10.250 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K415 | 00000 | ||
| 24 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 24.000 mm | 39.200 mm | 25.500 mm | 26.500 mm | 41.250 mm | 11.000 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K416 | 00000 | ||
| 28 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 28.000 mm | 45.600 mm | 27.000 mm | 30.680 mm | 44.500 mm | 11.000 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K432 | 00000 | ||
| 30 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 30.000 mm | 47.400 mm | 27.000 mm | 34.100 mm | 47.750 mm | 11.000 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K454 | 00000 | ||
| 32 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 32.000 mm | 47.400 mm | 27.000 mm | 34.100 mm | 47.750 mm | 11.000 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K46 | 00000 | ||
| 35 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 35.000 mm | 52.000 mm | 28.500 mm | 37.100 mm | 50.750 mm | 11.000 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K49 | 00000 | ||
| 40 mm | — | John Crane Type 21 Pac-Seal Type 21 Pac-Seal Type 31 Sealol Type 43 CE Short Sealol Type 43 CU Short | 40.000 mm | 59.200 mm | 35.000 mm | 43.360 mm | 60.250 mm | 12.750 mm | Carbon | Ceramic | Straight | Spring Retainer | 250 | Outside North America | 9281K503 | 000000 | ||
Mechanical Pump Shaft Seals
 |
Commonly used in well, sump, and displacement pumps, these seals have a two-piece spring-loaded design that keeps the sealing surfaces in contact as the material wears. Seals come furnished as two pieces—the seal and the seat. The seal is comprised of the case, spring, diaphragm, and washer, which come locked together as one piece. Seal Width represents the working height, which is the compressed length when installed. The seat is comprised of the seat and the gasket.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
Viton® Fluoroelastomer Diaphragm—Viton® fluoroelastomer diaphragms resist a wider range of chemicals than Buna-N.
Viton® Fluoroelastomer Gasket—Viton® fluoroelastomer gaskets resist a wider range of chemicals than Buna-N.
Cannot Be Sold Outside North America—Products cannot be sold outside North America due to restrictions.
Seal | Seat | Material | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Mfr. Equiv. No. | Mfr./Brand Equiv. | ID | OD | Wd. | ID | OD | Wd. | Washer | Seat | Max. Pressure, psi | Cannot Be Sold To | Each | |||
304 Stainless Steel Case and 304 Stainless Steel Spring with Viton® Fluoroelastomer Diaphragm and Viton® Fluoroelastomer Gasket | ||||||||||||||||
| 5/8" | 606116 | John Crane Type 6 Pac-Seal Type 16 Sealol Type 60L | 0.625" | 1.190" | 0.718" | 0.671" | 1.250" | 0.406" | Silicon Carbide | Silicon Carbide | 150 | Outside North America | 9281K91 | 000000 | ||
| 3/4" | 201VSC | John Crane Type 6 Pac-Seal Type 16 Sealol Type 60L | 0.750" | 1.312" | 0.718" | 0.797" | 1.375" | 0.406" | Silicon Carbide | Silicon Carbide | 150 | Outside North America | 9281K93 | 00000 | ||
