Metric Drill Bushings | McMaster-Carr

Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings. These bushings are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.

All bushings have a chamfer on the outside that centers the bushing as you place it into the hole. Press into place with a manual or hydraulic press. They also have internal chamfers, so it's easier to insert bits, pins, and punches into the bushing. Some bushings have internal chamfers on both ends, so no matter which end of the bushing is inserted into your jig, your bits, pins, and other tooling enter easily. Having an internal chamfer on the bottom of your bushing may cause shavings to get caught and bind as you remove the bit, however.

DIN 179 bushings meet dimensional and material standards that make sure they're compatible with other parts and tools. Although DIN 179 is no longer an active standard, it's still a common reference point for designers.

Don't see the size you need? Additional sizes are available.

For technical drawings and 3-D models, click on a part number.

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
0.35 mm ID
4	6	One End	0.35 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	000000	000000	000000
4	9	One End	0.35 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.38 mm ID
4	6	One End	0.38 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.38 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.4 mm ID
3	6	One End	0.4 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
4	6	One End	0.40 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.40 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.42 mm ID
4	6	One End	0.42 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.42 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.45 mm ID
4	6	One End	0.45 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.45 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.48 mm ID
4	6	One End	0.48 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.48 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.5 mm ID
3	6	One End	0.5 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3	6	Both Ends	0.5 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	6	One End	0.50 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.50 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.55 mm ID
4	6	One End	0.55 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.55 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.6 mm ID
3	6	One End	0.6 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3	6	Both Ends	0.6 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	6	One End	0.60 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.60 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.65 mm ID
4	6	One End	0.65 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.65 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.7 mm ID
3	6	One End	0.7 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3	6	Both Ends	0.7 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	6	One End	0.70 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.70 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.75 mm ID
4	6	One End	0.75 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.75 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.8 mm ID
3	6	One End	0.8 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3	6	Both Ends	0.8 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	6	One End	0.80 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.80 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.85 mm ID
4	6	One End	0.85 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	9	One End	0.85 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.9 mm ID
3	6	One End	0.9 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
3	6	Both Ends	0.9 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
3	9	One End	0.9 mm	0.006 to 0.016	0.004 to 0.01	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3	9	Both Ends	0.9 mm	0.006 to 0.016	0.004 to 0.01	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	6	One End	0.90 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
4	9	One End	0.90 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.95 mm ID
4	6	One End	0.95 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
4	9	One End	0.95 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
1 mm ID
3	6	One End	1 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
3	6	Both Ends	1 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
3	9	One End	1 mm	0.006 to 0.016	0.004 to 0.01	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3	9	Both Ends	1 mm	0.006 to 0.016	0.004 to 0.01	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
4	6	One End	1 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.05 mm ID
4	6	One End	1.05 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.05 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.1 mm ID
4	6	One End	1.1 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
4	6	Both Ends	1.1 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.1 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	Both Ends	1.1 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
1.15 mm ID
4	6	One End	1.15 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.15 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.2 mm ID
4	6	One End	1.2 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
4	6	Both Ends	1.2 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.2 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	Both Ends	1.2 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
1.25 mm ID
4	6	One End	1.25 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.25 mm	0.002 to 0.008	0.019 to 0.027	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
1.3 mm ID
4	6	One End	1.3 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
4	6	Both Ends	1.3 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.3 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	Both Ends	1.3 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
1.35 mm ID
4	6	One End	1.35 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.35 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.4 mm ID
4	6	One End	1.4 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
4	6	Both Ends	1.4 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.4 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	Both Ends	1.4 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
1.45 mm ID
4	6	One End	1.45 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.45 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.5 mm ID
4	6	One End	1.5 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
4	6	Both Ends	1.5 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.5 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	Both Ends	1.5 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
1.55 mm ID
4	6	One End	1.55 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.55 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.6 mm ID
4	6	One End	1.6 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
4	6	Both Ends	1.6 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.6 mm	0.006 to 0.016	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
4	9	Both Ends	1.6 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
1.65 mm ID
4	6	One End	1.65 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.65 mm	0.002 to 0.008	0.019 to 0.027	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
1.7 mm ID
4	6	One End	1.7 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
4	6	Both Ends	1.7 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.7 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	Both Ends	1.7 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
1.75 mm ID
4	6	One End	1.75 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.75 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.8 mm ID
4	6	One End	1.8 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
4	6	Both Ends	1.8 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.8 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	Both Ends	1.8 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
5	6	One End	1.80 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	1.8 mm	0.002 to 0.008	0.019 to 0.027	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
1.85 mm ID
5	6	One End	1.85 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	1.85 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
1.9 mm ID
5	6	One End	1.9 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	6	Both Ends	1.9 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	1.9 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	9	Both Ends	1.9 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
1.95 mm ID
5	6	One End	1.95 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	1.95 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2 mm ID
5	6	One End	2 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	6	Both Ends	2 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2 mm	0.006 to 0.016	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
5	9	Both Ends	2 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.05 mm ID
5	6	One End	2.05 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.05 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.1 mm ID
5	6	One End	2.1 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	6	Both Ends	2.1 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.1 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	9	Both Ends	2.1 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.15 mm ID
5	6	One End	2.15 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.15 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.2 mm ID
5	6	One End	2.2 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	6	Both Ends	2.2 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.2 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	9	Both Ends	2.2 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.25 mm ID
5	6	One End	2.25 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.25 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.3 mm ID
5	6	One End	2.3 mm	0.002 to 0.008	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
5	6	Both Ends	2.3 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.3 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	9	Both Ends	2.3 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.35 mm ID
5	6	One End	2.35 mm	0.002 to 0.008	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
5	9	One End	2.35 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.4 mm ID
5	6	One End	2.4 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	6	Both Ends	2.4 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.4 mm	0.002 to 0.008	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
5	9	Both Ends	2.4 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.45 mm ID
5	6	One End	2.45 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.45 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.47 mm ID
10	20	One End	2.47 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
2.48 mm ID
10	20	One End	2.48 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
2.49 mm ID
10	20	One End	2.49 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
2.5 mm ID
5	6	Both Ends	2.5 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
5	6	One End	2.5 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	9	Both Ends	2.5 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.5 mm	0.006 to 0.016	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
5	9	One End	2.5 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	20	One End	2.5 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
2.51 mm ID
10	20	One End	2.51 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
2.55 mm ID
5	6	One End	2.55 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.55 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.6 mm ID
5	6	Both Ends	2.6 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	6	One End	2.6 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	9	Both Ends	2.6 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.6 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	8	One End	2.60 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	2.60 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	16	One End	2.60 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
2.65 mm ID
6	8	One End	2.65 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	2.65 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	16	One End	2.65 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
2.7 mm ID
6	8	Both Ends	2.7 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	8	One End	2.7 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	12	Both Ends	2.7 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	2.7 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	16	Both Ends	2.7 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
6	16	One End	2.7 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
2.75 mm ID
6	8	One End	2.75 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	2.75 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	16	One End	2.75 mm	0.002 to 0.008	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
2.8 mm ID
6	8	Both Ends	2.8 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	8	One End	2.8 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	12	Both Ends	2.8 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	2.8 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	16	Both Ends	2.8 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
6	16	One End	2.8 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
2.9 mm ID
6	8	Both Ends	2.9 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	8	One End	2.9 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	12	Both Ends	2.9 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	2.9 mm	0.006 to 0.016	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
6	16	Both Ends	2.9 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
6	16	One End	2.9 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
2.98 mm ID
10	20	One End	2.98 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
2.99 mm ID
10	20	One End	2.99 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3 mm ID
6	8	Both Ends	3 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	8	One End	3 mm	0.002 to 0.008	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
6	12	Both Ends	3 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	3 mm	0.006 to 0.016	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
6	16	Both Ends	3 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
6	16	One End	3 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
10	20	One End	3 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3.02 mm ID
10	20	One End	3.02 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3.1 mm ID
6	8	Both Ends	3.1 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	8	One End	3.1 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	12	Both Ends	3.1 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	3.1 mm	0.004 to 0.012	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
6	16	Both Ends	3.1 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
6	16	One End	3.1 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
3.2 mm ID
6	8	Both Ends	3.2 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	8	One End	3.2 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	12	Both Ends	3.2 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	3.2 mm	0.01 to 0.022	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
6	16	Both Ends	3.2 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
6	16	One End	3.2 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
3.25 mm ID
6	8	One End	3.25 mm	0.004 to 0.012	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
6	12	One End	3.25 mm	0.004 to 0.012	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	16	One End	3.25 mm	0.004 to 0.012	0.019 to 0.027	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
3.3 mm ID
6	8	Both Ends	3.3 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	8	One End	3.3 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	12	Both Ends	3.3 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6	12	One End	3.3 mm	0.01 to 0.022	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
6	16	Both Ends	3.3 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
6	16	One End	3.3 mm	0.01 to 0.022	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
7	8	One End	3.30 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	3.30 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	16	One End	3.30 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
3.4 mm ID
7	8	Both Ends	3.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	8	One End	3.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	12	Both Ends	3.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	3.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	16	Both Ends	3.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
7	16	One End	3.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
3.5 mm ID
7	8	Both Ends	3.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	8	One End	3.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	12	Both Ends	3.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	3.5 mm	0.01 to 0.022	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
7	16	Both Ends	3.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
7	16	One End	3.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
3.6 mm ID
7	8	Both Ends	3.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	8	One End	3.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	12	Both Ends	3.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	3.6 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	0000	0000
7	16	Both Ends	3.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
7	16	One End	3.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
3.7 mm ID
7	8	Both Ends	3.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	8	One End	3.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	12	Both Ends	3.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	3.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	16	Both Ends	3.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
7	16	One End	3.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
3.75 mm ID
7	8	One End	3.75 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	3.75 mm	0.004 to 0.012	0.023 to 0.032	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
7	16	One End	3.75 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
3.8 mm ID
7	8	Both Ends	3.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	8	One End	3.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	12	Both Ends	3.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	3.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	16	Both Ends	3.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
7	16	One End	3.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
3.9 mm ID
7	8	Both Ends	3.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	8	One End	3.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
7	12	Both Ends	3.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	3.9 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
7	16	Both Ends	3.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
7	16	One End	3.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
4 mm ID
7	8	Both Ends	4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
7	8	One End	4 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
7	12	Both Ends	4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7	12	One End	4 mm	0.01 to 0.022	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
7	16	Both Ends	4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
7	16	One End	4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
8	8	One End	4 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	16	One End	4 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4.1 mm ID
8	8	Both Ends	4.1 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	8	One End	4.1 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	12	Both Ends	4.1 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.1 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	Both Ends	4.1 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
8	16	One End	4.1 mm	0.01 to 0.022	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
4.2 mm ID
8	8	Both Ends	4.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	8	One End	4.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	12	Both Ends	4.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	Both Ends	4.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
8	16	One End	4.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4.24 mm ID
8	12	One End	4.24 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	0000	0000
4.25 mm ID
8	8	One End	4.25 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.25 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	16	One End	4.25 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4.3 mm ID
8	8	Both Ends	4.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	8	One End	4.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	12	Both Ends	4.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	Both Ends	4.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
8	16	One End	4.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4.4 mm ID
8	8	Both Ends	4.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	8	One End	4.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	12	Both Ends	4.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	Both Ends	4.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
8	16	One End	4.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4.5 mm ID
8	8	Both Ends	4.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	8	One End	4.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	12	Both Ends	4.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	Both Ends	4.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
8	16	One End	4.5 mm	0.01 to 0.022	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
4.6 mm ID
8	8	Both Ends	4.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	8	One End	4.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	12	Both Ends	4.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	Both Ends	4.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
8	16	One End	4.6 mm	0.01 to 0.022	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
4.7 mm ID
8	8	Both Ends	4.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	8	One End	4.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	12	Both Ends	4.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	Both Ends	4.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
8	16	One End	4.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4.75 mm ID
8	8	One End	4.75 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.75 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
8	16	One End	4.75 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4.8 mm ID
8	8	Both Ends	4.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	8	One End	4.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	12	Both Ends	4.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	Both Ends	4.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
8	16	One End	4.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4.9 mm ID
8	8	Both Ends	4.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	8	One End	4.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	12	Both Ends	4.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	4.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
8	16	Both Ends	4.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
8	16	One End	4.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
5 mm ID
8	8	Both Ends	5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	8	One End	5 mm	0.01 to 0.022	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
8	12	Both Ends	5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8	12	One End	5 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
8	14	One End	5 mm	0.004 to 0.012	0.023 to 0.032	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
8	16	Both Ends	5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
8	16	One End	5 mm	0.004 to 0.012	0.023 to 0.032	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	0000
8	16	One End	5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
10	10	One End	5 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	20	One End	5 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5.1 mm ID
10	10	Both Ends	5.1 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	10	One End	5.1 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
10	16	Both Ends	5.1 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.1 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	20	Both Ends	5.1 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	20	One End	5.1 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
5.2 mm ID
10	10	Both Ends	5.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	10	One End	5.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	16	Both Ends	5.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	20	Both Ends	5.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	20	One End	5.2 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
5.25 mm ID
10	10	One End	5.25 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	000000	00000	00000
10	16	One End	5.25 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
10	20	One End	5.25 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5.3 mm ID
10	10	Both Ends	5.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	10	One End	5.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	16	Both Ends	5.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	20	Both Ends	5.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	20	One End	5.3 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
5.4 mm ID
10	10	Both Ends	5.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	10	One End	5.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	16	Both Ends	5.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	20	Both Ends	5.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	20	One End	5.4 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
5.5 mm ID
10	10	Both Ends	5.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	10	One End	5.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	16	Both Ends	5.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.5 mm	0.01 to 0.022	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
10	20	Both Ends	5.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	20	One End	5.5 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
5.6 mm ID
10	10	Both Ends	5.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	10	One End	5.6 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
10	16	Both Ends	5.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	20	Both Ends	5.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	20	One End	5.6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
5.7 mm ID
10	10	Both Ends	5.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	10	One End	5.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	16	Both Ends	5.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.7 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
10	20	Both Ends	5.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	20	One End	5.7 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
5.75 mm ID
10	10	One End	5.75 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.75 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	20	One End	5.75 mm	0.004 to 0.012	0.023 to 0.032	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5.8 mm ID
10	10	Both Ends	5.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	10	One End	5.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	16	Both Ends	5.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	20	Both Ends	5.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	20	One End	5.8 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
5.9 mm ID
10	10	Both Ends	5.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	10	One End	5.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	16	Both Ends	5.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	5.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	20	Both Ends	5.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	20	One End	5.9 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
6 mm ID
8	12	One End	6 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
10	5	One End	6 mm	0.004 to 0.012	0.023 to 0.032	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
10	6	One End	6 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
10	10	Both Ends	6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	10	One End	6 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
10	16	Both Ends	6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10	16	One End	6 mm	0.01 to 0.022	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
10	20	Both Ends	6 mm	0.01 to 0.022	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
10	20	One End	6 mm	0.004 to 0.012	0.01 to 0.019	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
12	10	One End	6 mm	0.004 to 0.012	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	6 mm	0.004 to 0.012	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	20	One End	6 mm	0.004 to 0.012	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6.05 mm ID
10	12	One End	6.05 mm	0.013 to 0.028	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.1 mm ID
12	10	Both Ends	6.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	6.1 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
12	16	Both Ends	6.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	6.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	6.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	6.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.2 mm ID
12	10	Both Ends	6.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	6.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	6.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	6.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	6.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	6.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12	30	One End	6.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.25 mm ID
12	10	One End	6.25 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
12	16	One End	6.25 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
12	20	One End	6.25 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
6.3 mm ID
12	10	Both Ends	6.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	6.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	6.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	6.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	6.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	6.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.4 mm ID
12	10	Both Ends	6.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	6.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	6.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	6.4 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
12	20	Both Ends	6.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	6.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
6.5 mm ID
12	10	Both Ends	6.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	10	One End	6.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	6.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	6.5 mm	0.013 to 0.028	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
12	20	Both Ends	6.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	6.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.6 mm ID
12	10	Both Ends	6.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	6.6 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
12	16	Both Ends	6.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	6.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	6.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	6.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.7 mm ID
12	10	Both Ends	6.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	6.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	6.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	6.7 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
12	20	Both Ends	6.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	6.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.8 mm ID
12	10	Both Ends	6.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	6.8 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
12	16	Both Ends	6.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	6.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	6.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	6.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
6.9 mm ID
12	10	Both Ends	6.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	6.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	6.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	6.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	6.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	6.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7 mm ID
12	10	Both Ends	7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7 mm	0.013 to 0.028	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
12	20	Both Ends	7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.1 mm ID
12	10	Both Ends	7.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	7.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	7.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	7.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	7.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.2 mm ID
12	10	Both Ends	7.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	7.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	7.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	7.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	7.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.25 mm ID
12	10	One End	7.25 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7.25 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	20	One End	7.25 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7.3 mm ID
12	10	Both Ends	7.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	7.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	7.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7.3 mm	0.013 to 0.028	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
12	20	Both Ends	7.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	7.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.4 mm ID
12	10	Both Ends	7.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	7.4 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
12	16	Both Ends	7.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	7.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	7.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.5 mm ID
12	10	Both Ends	7.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	7.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	7.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7.5 mm	0.013 to 0.028	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
12	20	Both Ends	7.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	7.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.6 mm ID
12	10	Both Ends	7.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	7.6 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
12	16	Both Ends	7.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	7.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	7.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.7 mm ID
12	10	Both Ends	7.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	7.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	7.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7.7 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
12	20	Both Ends	7.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	7.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.75 mm ID
12	10	One End	7.75 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7.75 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	20	One End	7.75 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
7.8 mm ID
12	10	Both Ends	7.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	7.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	7.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	7.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	7.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
7.9 mm ID
12	10	Both Ends	7.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	7.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	16	Both Ends	7.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	7.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
12	20	Both Ends	7.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	7.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
8 mm ID
12	6	One End	8 mm	0.005 to 0.014	0.028 to 0.039	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	000000	00000	00000
12	10	Both Ends	8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	10	One End	8 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
12	12.7	One End	8 mm	0.005 to 0.014	0.028 to 0.039	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
12	16	Both Ends	8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
12	16	One End	8 mm	0.013 to 0.028	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
12	20	Both Ends	8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
12	20	One End	8 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
15	12	One End	8 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	20	One End	8 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	25	One End	8 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8.1 mm ID
15	12	Both Ends	8.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	8.1 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
15	12	One End	8.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	8.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	25	Both Ends	8.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	8.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
8.2 mm ID
15	12	Both Ends	8.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	8.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	8.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	8.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	8.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	8.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
8.25 mm ID
15	12	One End	8.25 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	20	One End	8.25 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
15	25	One End	8.25 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8.3 mm ID
15	12	Both Ends	8.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	8.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	8.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	8.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	8.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	8.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
8.4 mm ID
15	12	Both Ends	8.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	8.4 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
15	20	Both Ends	8.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	8.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	8.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	8.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
8.5 mm ID
15	12	Both Ends	8.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	8.5 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
15	20	Both Ends	8.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	8.5 mm	0.013 to 0.028	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
15	25	Both Ends	8.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	8.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
8.6 mm ID
15	12	Both Ends	8.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	8.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	8.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	8.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	8.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	8.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
8.7 mm ID
15	12	Both Ends	8.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	8.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	8.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	8.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	8.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	8.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
8.75 mm ID
15	12	One End	8.75 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
15	20	One End	8.75 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
15	25	One End	8.75 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
8.8 mm ID
15	12	Both Ends	8.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	8.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	8.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	8.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	8.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	8.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
8.9 mm ID
15	12	Both Ends	8.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	8.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	8.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	8.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	8.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	8.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
9 mm ID
15	12	Both Ends	9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	9 mm	0.013 to 0.028	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
15	25	Both Ends	9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
9.1 mm ID
15	12	Both Ends	9.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	9.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	9.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	9.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	9.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	9.1 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
9.2 mm ID
15	12	Both Ends	9.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	9.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	9.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	9.2 mm	0.013 to 0.028	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
15	25	Both Ends	9.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	9.2 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
9.25 mm ID
15	12	One End	9.25 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	20	One End	9.25 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	25	One End	9.25 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
9.3 mm ID
15	12	Both Ends	9.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	9.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	9.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	9.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	9.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	9.3 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
9.4 mm ID
15	12	Both Ends	9.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	9.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	9.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	9.4 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
15	25	Both Ends	9.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	9.4 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
9.5 mm ID
15	12	Both Ends	9.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	9.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	9.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	9.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	9.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	9.5 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
9.6 mm ID
15	12	Both Ends	9.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	9.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	9.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	9.6 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
15	25	Both Ends	9.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	9.6 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
9.7 mm ID
15	12	Both Ends	9.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	9.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	9.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	9.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	9.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	9.7 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
9.75 mm ID
15	12	One End	9.75 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	20	One End	9.75 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	25	One End	9.75 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
9.8 mm ID
15	12	Both Ends	9.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	9.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	9.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	9.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	9.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	9.8 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
9.9 mm ID
15	12	Both Ends	9.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	9.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
15	20	Both Ends	9.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	9.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
15	25	Both Ends	9.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	9.9 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
10 mm ID
14	25	One End	10 mm	0.005 to 0.014	0.028 to 0.039	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
15	12	Both Ends	10 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
15	12	One End	10 mm	0.013 to 0.028	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
15	13	One End	10 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	0000	0000	0000
15	20	Both Ends	10 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
15	20	One End	10 mm	0.013 to 0.028	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
15	25	Both Ends	10 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
15	25	One End	10 mm	0.005 to 0.014	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
18	7	One End	10 mm	0.013 to 0.028	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
18	12	One End	10 mm	0.005 to 0.014	0.028 to 0.039	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
18	20	One End	10 mm	0.005 to 0.014	0.028 to 0.039	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
18	25	One End	10 mm	0.005 to 0.014	0.028 to 0.039	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
10.1 mm ID
18	12	Both Ends	10.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	10.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	10.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	10.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	10.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	10.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
10.2 mm ID
18	12	Both Ends	10.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	10.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	10.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	10.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	10.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	10.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
10.3 mm ID
18	12	Both Ends	10.3 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	10.3 mm	0.006 to 0.017	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
18	20	Both Ends	10.3 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	10.3 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	10.3 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	10.3 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
10.4 mm ID
18	12	Both Ends	10.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	10.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	10.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	10.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	10.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	10.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
10.5 mm ID
18	12	Both Ends	10.5 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	000000	00000	00000
18	12	One End	10.5 mm	0.006 to 0.017	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	00000
18	20	Both Ends	10.5 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	10.5 mm	0.016 to 0.034	0.012 to 0.023	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	0000
18	25	Both Ends	10.5 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	10.5 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
10.6 mm ID
18	12	Both Ends	10.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	10.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	10.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	10.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	10.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	10.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
10.7 mm ID
18	12	Both Ends	10.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	10.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	10.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	10.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	10.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	10.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
10.75 mm ID
18	20	One End	10.75 mm	0.006 to 0.017	0.028 to 0.039	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
10.8 mm ID
18	12	Both Ends	10.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	10.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	10.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	10.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	10.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	10.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
10.9 mm ID
18	12	Both Ends	10.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	10.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	10.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	10.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	10.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	10.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
11 mm ID
18	12	Both Ends	11 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	11 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	11 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	11 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	11 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	11 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
11.1 mm ID
18	12	Both Ends	11.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	11.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	11.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	11.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	11.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	11.1 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
11.2 mm ID
18	12	Both Ends	11.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	11.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	11.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	11.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	11.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	11.2 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
11.3 mm ID
18	12	Both Ends	11.3 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	11.3 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	11.3 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	11.3 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	11.3 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	11.3 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
11.4 mm ID
18	12	Both Ends	11.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	11.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	11.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	11.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	11.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	11.4 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
11.5 mm ID
18	12	Both Ends	11.5 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	11.5 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	11.5 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	11.5 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	11.5 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	11.5 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
11.6 mm ID
18	12	Both Ends	11.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	11.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	11.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	11.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	11.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	11.6 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
11.7 mm ID
18	12	Both Ends	11.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	11.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	11.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	11.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	11.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	11.7 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
11.8 mm ID
18	12	Both Ends	11.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	11.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
18	20	Both Ends	11.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	11.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	11.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	11.8 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
11.9 mm ID
18	12	Both Ends	11.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	11.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
18	20	Both Ends	11.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	11.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	11.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	11.9 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
12 mm ID
16	10	One End	12 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	000000	000000	000000
18	12	Both Ends	12 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
18	12	One End	12 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	0000	0000
18	20	Both Ends	12 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	20	One End	12 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
18	25	Both Ends	12 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18	25	One End	12 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
22	16	One End	12 mm	0.006 to 0.017	0.035 to 0.048	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
22	28	One End	12 mm	0.006 to 0.017	0.035 to 0.048	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
22	36	One End	12 mm	0.006 to 0.017	0.035 to 0.048	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
12.05 mm ID
18	6	One End	12.05 mm	0.016 to 0.034	0.012 to 0.023	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12.1 mm ID
22	16	Both Ends	12.1 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	12.1 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	12.1 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	12.1 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	12.1 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	12.1 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12.2 mm ID
22	16	Both Ends	12.2 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	12.2 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	12.2 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	12.2 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	12.2 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	12.2 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12.25 mm ID
35	26	One End	12.25 mm	0.016 to 0.034	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12.3 mm ID
22	16	Both Ends	12.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	12.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	12.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	12.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	12.3 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	12.3 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12.4 mm ID
22	16	Both Ends	12.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	12.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	12.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	12.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	12.4 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	12.4 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12.5 mm ID
16	7	One End	12.5 mm	0.016 to 0.034	0.012 to 0.023	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	16	Both Ends	12.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	12.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	12.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	12.5 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
22	36	Both Ends	12.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	12.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12.6 mm ID
22	16	Both Ends	12.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	12.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	12.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	12.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	12.6 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	12.6 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12.7 mm ID
22	16	Both Ends	12.7 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	28	Both Ends	12.7 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	12.7 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	28	One End	12.7 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	12.7 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	12.7 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12.8 mm ID
22	16	Both Ends	12.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	12.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	12.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	12.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	12.8 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	12.8 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
12.9 mm ID
22	16	Both Ends	12.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	12.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	12.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	12.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	12.9 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	12.9 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
13 mm ID
22	16	Both Ends	13 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	13 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	13 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	13 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
22	36	Both Ends	13 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	13 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
13.1 mm ID
22	16	Both Ends	13.1 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	13.1 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	13.1 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	13.1 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	13.1 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	13.1 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
13.2 mm ID
22	16	Both Ends	13.2 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	13.2 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	13.2 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	13.2 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
22	36	Both Ends	13.2 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	13.2 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
13.3 mm ID
22	16	Both Ends	13.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	13.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	13.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	13.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	13.3 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	13.3 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
13.4 mm ID
22	16	Both Ends	13.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	13.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	13.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	13.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	13.4 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	13.4 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
13.5 mm ID
22	16	Both Ends	13.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	000000	000000	00000
22	16	One End	13.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	13.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	13.5 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
22	36	Both Ends	13.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	13.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
13.6 mm ID
22	16	Both Ends	13.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	13.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	13.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	13.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	13.6 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	13.6 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
13.7 mm ID
22	16	Both Ends	13.7 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	13.7 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	13.7 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	13.7 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	13.7 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	13.7 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
13.8 mm ID
22	16	Both Ends	13.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	13.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	13.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	13.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	13.8 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	13.8 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
13.9 mm ID
22	16	Both Ends	13.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	13.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	13.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	13.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	13.9 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	13.9 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14 mm ID
22	12	One End	14 mm	0.006 to 0.017	0.035 to 0.048	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	0000
22	16	Both Ends	14 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	14 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	14 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	14 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
22	28	One End	14 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	14 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	14 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14.1 mm ID
22	16	Both Ends	14.1 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	14.1 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	14.1 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	Both Ends	14.1 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	14.1 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14.2 mm ID
22	16	Both Ends	14.2 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	14.2 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	14.2 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	14.2 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	14.2 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	14.2 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14.3 mm ID
22	16	Both Ends	14.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	14.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	14.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	14.3 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	14.3 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	14.3 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14.4 mm ID
22	16	Both Ends	14.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	14.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	14.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	14.4 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	14.4 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	14.4 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14.5 mm ID
22	16	Both Ends	14.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	14.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	14.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	14.5 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
22	36	Both Ends	14.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	14.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14.6 mm ID
22	16	Both Ends	14.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	14.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	14.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	14.6 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	14.6 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	14.6 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14.7 mm ID
22	16	Both Ends	14.7 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	14.7 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	14.7 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	14.7 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	14.7 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	14.7 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14.8 mm ID
22	16	Both Ends	14.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	14.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	14.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	14.8 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	14.8 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	14.8 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
14.9 mm ID
22	16	Both Ends	14.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
22	16	One End	14.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	14.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	14.9 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
22	36	Both Ends	14.9 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	14.9 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
15 mm ID
22	16	Both Ends	15 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	000000	000000	00000
22	16	One End	15 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
22	28	Both Ends	15 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	28	One End	15 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
22	36	Both Ends	15 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22	36	One End	15 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	16	One End	15 mm	0.006 to 0.017	0.035 to 0.048	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
26	28	One End	15 mm	0.006 to 0.017	0.035 to 0.048	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
26	36	One End	15 mm	0.006 to 0.017	0.035 to 0.048	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
15.25 mm ID
26	28	One End	15.25 mm	0.006 to 0.017	0.035 to 0.048	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	0000
15.5 mm ID
26	16	Both Ends	15.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	16	One End	15.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	28	Both Ends	15.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	28	One End	15.5 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
26	36	Both Ends	15.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	36	One End	15.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
16 mm ID
26	9	One End	16 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	10	One End	16 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	16	Both Ends	16 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	16	One End	16 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	28	Both Ends	16 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	28	One End	16 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
26	36	Both Ends	16 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	36	One End	16 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
16.25 mm ID
35	32	One End	16.25 mm	0.016 to 0.034	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
16.5 mm ID
26	16	Both Ends	16.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	16	One End	16.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	28	Both Ends	16.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	28	One End	16.5 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
26	36	Both Ends	16.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	36	One End	16.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
17 mm ID
26	16	Both Ends	17 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	16	One End	17 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	28	Both Ends	17 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	28	One End	17 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
26	36	Both Ends	17 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	36	One End	17 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
17.5 mm ID
26	16	Both Ends	17.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	16	One End	17.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	28	Both Ends	17.5 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	28	One End	17.5 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
26	36	Both Ends	17.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	36	One End	17.5 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
18 mm ID
26	16	Both Ends	18 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	16	One End	18 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26	28	Both Ends	18 mm	0.016 to 0.034	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	28	One End	18 mm	0.016 to 0.034	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
26	36	Both Ends	18 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26	36	One End	18 mm	0.016 to 0.034	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	20	One End	18 mm	0.006 to 0.017	0.035 to 0.048	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
30	36	One End	18 mm	0.006 to 0.017	0.035 to 0.048	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	45	One End	18 mm	0.006 to 0.017	0.035 to 0.048	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
18.5 mm ID
30	20	Both Ends	18.5 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	20	One End	18.5 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	36	Both Ends	18.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	36	One End	18.5 mm	0.007 to 0.02	0.035 to 0.048	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	45	Both Ends	18.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	45	One End	18.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
19 mm ID
30	20	Both Ends	19 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	20	One End	19 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	36	Both Ends	19 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	36	One End	19 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	45	Both Ends	19 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	45	One End	19 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
19.5 mm ID
30	20	Both Ends	19.5 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	20	One End	19.5 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	36	Both Ends	19.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	36	One End	19.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	45	Both Ends	19.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	45	One End	19.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
20 mm ID
25	18	One End	20 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	20	Both Ends	20 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	20	One End	20 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	36	Both Ends	20 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	36	One End	20 mm	0.02 to 0.041	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
30	36	One End	20 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	45	Both Ends	20 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	45	One End	20 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
20.5 mm ID
30	20	Both Ends	20.5 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	20	One End	20.5 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	36	Both Ends	20.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	36	One End	20.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	45	Both Ends	20.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	45	One End	20.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
21 mm ID
30	20	Both Ends	21 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	20	One End	21 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	36	Both Ends	21 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	36	One End	21 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	45	Both Ends	21 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	45	One End	21 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
21.25 mm ID
35	32	One End	21.25 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
21.5 mm ID
30	20	Both Ends	21.5 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	20	One End	21.5 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	36	Both Ends	21.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	36	One End	21.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	45	Both Ends	21.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	45	One End	21.5 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
22 mm ID
30	20	Both Ends	22 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	000000	000000	000000
30	20	One End	22 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
30	36	Both Ends	22 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	36	One End	22 mm	0.02 to 0.041	0.015 to 0.028	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
30	45	Both Ends	22 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
30	45	One End	22 mm	0.02 to 0.041	0.015 to 0.028	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	20	One End	22 mm	0.007 to 0.02	0.043 to 0.059	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
35	36	One End	22 mm	0.007 to 0.02	0.043 to 0.059	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	45	One End	22 mm	0.007 to 0.02	0.043 to 0.059	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
22.5 mm ID
35	20	Both Ends	22.5 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	20	One End	22.5 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	36	Both Ends	22.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	36	One End	22.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	45	Both Ends	22.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	45	One End	22.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
23 mm ID
35	20	Both Ends	23 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	20	One End	23 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	36	Both Ends	23 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	36	One End	23 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	45	Both Ends	23 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	45	One End	23 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
23.5 mm ID
35	20	Both Ends	23.5 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	20	One End	23.5 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	36	Both Ends	23.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	36	One End	23.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	45	Both Ends	23.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	45	One End	23.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
24 mm ID
35	20	Both Ends	24 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	20	One End	24 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	36	Both Ends	24 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	36	One End	24 mm	0.02 to 0.041	0.017 to 0.033	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
35	45	Both Ends	24 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	45	One End	24 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
24.25 mm ID
35	32	One End	24.25 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
24.5 mm ID
35	20	Both Ends	24.5 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	20	One End	24.5 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	36	Both Ends	24.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	36	One End	24.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	45	Both Ends	24.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	45	One End	24.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
25 mm ID
28	25	One End	25 mm	0.02 to 0.041	0.015 to 0.028	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
31	15	One End	25 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
31	50	One End	25 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
31	60	One End	25 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	20	Both Ends	25 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	20	One End	25 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	36	Both Ends	25 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	36	One End	25 mm	0.02 to 0.041	0.017 to 0.033	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
35	45	Both Ends	25 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	45	One End	25 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
25.5 mm ID
35	20	Both Ends	25.5 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	20	One End	25.5 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	36	Both Ends	25.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	36	One End	25.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	45	Both Ends	25.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	45	One End	25.5 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
25.75 mm ID
35	32	One End	25.75 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
26 mm ID
35	20	Both Ends	26 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	20	One End	26 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	36	Both Ends	26 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	36	One End	26 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
35	45	Both Ends	26 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
35	45	One End	26 mm	0.02 to 0.041	0.017 to 0.033	-0.3 to 0.3	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
42	25	One End	26 mm	0.007 to 0.02	0.043 to 0.059	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
42	45	One End	26 mm	0.007 to 0.02	0.043 to 0.059	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
42	56	One End	26 mm	0.007 to 0.02	0.043 to 0.059	-0.35 to 0.35	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
26.5 mm ID
42	25	Both Ends	26.5 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
42	25	One End	26.5 mm	0.02 to 0.041	0.017 to 0.033	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
42	45	Both Ends	26.5 mm	0.02 to 0.041	0.017 to 0.033

Over 48,000 metals now include traceable material certificates.

Metric Press-Fit Drill Bushings