System of Measurement System of Measurement | Show |
|---|
|
Thread Pitch Thread Pitch |
|---|
|
|
Thread Type Thread Type |
|---|
Material Material |
|---|
|
Height Height |
|---|
Width Width |
|---|
Head Diameter Head Diameter |
|---|
|
|
|
Base Diameter Base Diameter |
|---|
Finish Finish |
|---|
|
Collar Height Collar Height |
|---|
|
|
|
Thread Spacing Thread Spacing |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Wing Nut Profile Wing Nut Profile |
|---|
 | Standard |
Thread Fit Thread Fit |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Collar Diameter Collar Diameter |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Threading Threading |
|---|
 | Fully Threaded |
 | Partially Threaded |
About Nuts, Materials, and Finishes
More
Reinforced Plastic Knurled-Head Thumb Nuts
An aluminum insert with strong threads withstands more torque during installation. They're chemical resistant, nonconductive, and lightweight. The head is knurled for slip-resistant controlled adjustment and the collar raises the head to make it easy to grip.
For technical drawings and 3-D models, click on a part number.
Thread | Collar | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Dia., mm | Ht., mm | Head Dia., mm | Ht., mm | Temp. Range, °F | Color | Pkg. Qty. | Pkg. | |
Acetal Plastic | ||||||||||
| M3 | 0.5 | 9.1 | 1.2 | 9.6 | 5.6 | 32° to 180° | Black | 10 | 000000000 | 00000 |
| M4 | 0.7 | 9.9 | 2.4 | 13 | 6.7 | 32° to 180° | Black | 10 | 000000000 | 0000 |
| M5 | 0.8 | 11.5 | 3.2 | 16 | 7.5 | 32° to 180° | Black | 10 | 000000000 | 0000 |
| M6 | 1 | 13.6 | 4.8 | 19 | 9.1 | 32° to 180° | Black | 10 | 000000000 | 0000 |
| M6 | 1 | 14.3 | 1.6 | 26 | 9.1 | 32° to 180° | Black | 10 | 000000000 | 00000 |
| M8 | 1.25 | 16.3 | 3.2 | 26 | 10.7 | 32° to 180° | Black | 10 | 000000000 | 00000 |
Metric 18-8 Stainless Steel Knurled-Head Thumb Nuts
Made from 18-8 stainless steel, these metric thumb nuts have good chemical resistance and may be mildly magnetic. The head is knurled for slip-resistant controlled adjustment and the collar raises the head to make it easy to grip.
Black-oxide stainless steel nuts have a dark surface color.
For technical drawings and 3-D models, click on a part number.
Thread | Collar | |||||||
|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Dia., mm | Ht., mm | Head Dia., mm | Ht., mm | Specifications Met | Each | |
18-8 Stainless Steel | ||||||||
| M2 | 0.4 | 5 | 4 | 10 | 6 | __ | 000000000 | 00000 |
| M2.5 | 0.45 | 6 | 5 | 12 | 7.5 | __ | 000000000 | 0000 |
| M3 | 0.5 | 6 | 5 | 12 | 7.5 | DIN 466 | 000000000 | 0000 |
| M3.5 | 0.6 | 8 | 6 | 16 | 9.5 | __ | 000000000 | 0000 |
| M4 | 0.7 | 8 | 6 | 16 | 9.5 | DIN 466 | 000000000 | 0000 |
| M5 | 0.8 | 10 | 7.5 | 20 | 11.5 | DIN 466 | 000000000 | 0000 |
| M6 | 1 | 12 | 10 | 24 | 15 | DIN 466 | 000000000 | 0000 |
| M8 | 1.25 | 16 | 12 | 30 | 18 | DIN 466 | 000000000 | 00000 |
| M10 | 1.5 | 20 | 15 | 36 | 23 | DIN 466 | 000000000 | 00000 |
| M12 | 1.75 | 19 | 12 | 25.4 | 22 | __ | 000000000 | 00000 |
| M14 | 2 | 28 | 20 | 56 | 30 | __ | 000000000 | 00000 |
| M16 | 2 | 32 | 25 | 64 | 35 | __ | 000000000 | 00000 |
Black-Oxide 18-8 Stainless Steel | ||||||||
| M2 | 0.4 | 5 | 4 | 10 | 6 | __ | 000000000 | 0000 |
| M3 | 0.5 | 6 | 5 | 12 | 7.5 | DIN 466 | 000000000 | 0000 |
| M4 | 0.7 | 8 | 6 | 16 | 9.5 | DIN 466 | 000000000 | 0000 |
| M5 | 0.8 | 10 | 7.5 | 20 | 11.5 | DIN 466 | 000000000 | 0000 |
| M6 | 1 | 12 | 10 | 24 | 15 | DIN 466 | 000000000 | 0000 |
| M8 | 1.25 | 16 | 12 | 30 | 18 | DIN 466 | 000000000 | 00000 |
| M10 | 1.5 | 20 | 15 | 36 | 23 | DIN 466 | 000000000 | 00000 |
| M12 | 1.75 | 19 | 12 | 25.4 | 22 | __ | 000000000 | 0000 |
Metric 18-8 Stainless Steel Flanged Knurled-Head Thumb Nuts
Made from 18-8 stainless steel, these thumb nuts have good chemical resistance and may be mildly magnetic. The flange distributes the load over a large area and reduces stress where the nut meets the material surface. A knurled head provides a slip-resistant grip for controlled adjustment.
Passivated stainless steel nuts provide added protection against oxidation and corrosion.
For technical drawings and 3-D models, click on a part number.
Thread | Collar | ||||||
|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Dia., mm | Ht., mm | Head Dia., mm | Ht., mm | Each | |
18-8 Stainless Steel | |||||||
| M1.6 | 0.35 | 4 | 4 | 6 | 6 | 000000000 | 00000 |
| M1.6 | 0.35 | 4 | 4 | 8 | 6 | 000000000 | 0000 |
| M2 | 0.4 | 4 | 2 | 6 | 4 | 000000000 | 0000 |
| M2 | 0.4 | 4 | 4 | 8 | 6 | 000000000 | 0000 |
| M2.5 | 0.45 | 4 | 5 | 12 | 7 | 000000000 | 0000 |
| M2.5 | 0.45 | 5 | 3 | 6 | 6 | 000000000 | 0000 |
| M2.5 | 0.45 | 6 | 3 | 8 | 6 | 000000000 | 0000 |
| M3 | 0.5 | 6 | 3 | 8 | 6 | 000000000 | 0000 |
| M3 | 0.5 | 6 | 5 | 16 | 8 | 000000000 | 0000 |
| M3.5 | 0.6 | 9 | 4 | 10 | 7 | 000000000 | 0000 |
| M4 | 0.7 | 8 | 6 | 12 | 10 | 000000000 | 0000 |
| M4 | 0.7 | 8 | 6 | 20 | 10 | 000000000 | 00000 |
| M4 | 0.7 | 9 | 4 | 10 | 7 | 000000000 | 0000 |
| M5 | 0.8 | 10 | 7.5 | 16 | 12 | 000000000 | 0000 |
| M5 | 0.8 | 10 | 7.5 | 24 | 12 | 000000000 | 00000 |
| M5 | 0.8 | 11 | 5 | 13 | 9 | 000000000 | 0000 |
| M6 | 1 | 12 | 5 | 13 | 9 | 000000000 | 0000 |
| M6 | 1 | 12 | 10 | 20 | 15 | 000000000 | 00000 |
| M6 | 1 | 12 | 10 | 24 | 15 | 000000000 | 00000 |
| M8 | 1.25 | 16 | 6 | 19 | 12 | 000000000 | 0000 |
| M8 | 1.25 | 16 | 12 | 24 | 18 | 000000000 | 00000 |
| M8 | 1.25 | 16 | 12 | 31.8 | 18 | 000000000 | 00000 |
| M10 | 1.5 | 20 | 15 | 26 | 23 | 000000000 | 00000 |
| M10 | 1.5 | 20 | 15 | 31.8 | 23 | 000000000 | 00000 |
| M12 | 1.75 | 24 | 20 | 31.8 | 30 | 000000000 | 00000 |
Black-Oxide 18-8 Stainless Steel | |||||||
| M2.5 | 0.45 | 5 | 3 | 6 | 6 | 000000000 | 0000 |
| M3 | 0.5 | 6 | 3 | 8 | 6 | 000000000 | 0000 |
| M3.5 | 0.6 | 9 | 4 | 10 | 7 | 000000000 | 0000 |
| M4 | 0.7 | 9 | 4 | 10 | 7 | 000000000 | 0000 |
| M5 | 0.8 | 11 | 5 | 13 | 9 | 000000000 | 0000 |
| M6 | 1 | 12 | 5 | 13 | 9 | 000000000 | 0000 |
| M8 | 1.25 | 16 | 6 | 19 | 12 | 000000000 | 00000 |
Passivated 18-8 Stainless Steel | |||||||
| M2.5 | 0.45 | 5 | 3 | 6 | 6 | 000000000 | 0000 |
| M3 | 0.5 | 6 | 3 | 8 | 6 | 000000000 | 0000 |
| M4 | 0.7 | 9 | 4 | 10 | 7 | 000000000 | 0000 |
| M5 | 0.8 | 11 | 5 | 13 | 9 | 000000000 | 0000 |
| M6 | 1 | 12 | 5 | 13 | 9 | 000000000 | 0000 |
| M8 | 1.25 | 16 | 6 | 19 | 12 | 000000000 | 00000 |
Metric Brass Flanged Knurled-Head Thumb Nuts
Made from zinc-plated brass, these thumb nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. The flange distributes the load over a large area and reduces stress where the nut meets the material surface. A knurled head provides a slip-resistant grip for controlled adjustment.
For technical drawings and 3-D models, click on a part number.
Low-Profile Thumb Nuts
Use these thumb nuts in low-clearance applications or jam one against another nut to hold it in place. The knurls provide a slip-resistant grip for controlled adjustment. A black-oxide finish provides mild corrosion resistance in dry environments.
For technical drawings and 3-D models, click on a part number.
Metric 18-8 Stainless Steel Wing Nuts
Made from 18-8 stainless steel, these nuts have good chemical resistance and may be mildly magnetic. The wings provide more leverage for greater torque while tightening than knurled-head thumb nuts.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Base Dia., mm | Wd., mm | Ht., mm | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
| M3 | 0.5 | 8 | 19.5 | 10 | DIN 315 | 25 | 000000000 | 000000 |
| M4 | 0.7 | 9 | 21.5 | 10.3 | DIN 315 | 10 | 000000000 | 0000 |
| M5 | 0.8 | 10.5 | 21.5 | 10.3 | DIN 315 | 10 | 000000000 | 0000 |
| M6 | 1 | 13 | 26.3 | 12.7 | DIN 315 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 15.25 | 30.1 | 15.1 | DIN 315 | 10 | 000000000 | 00000 |
| M10 | 1.5 | 18 | 34.9 | 18.3 | DIN 315 | 5 | 000000000 | 00000 |
| M12 | 1.75 | 23 | 47.6 | 23.8 | DIN 315 | 1 | 000000000 | 0000 |
| M14 | 2 | 26.6 | 58.3 | 28.5 | DIN 315 | 1 | 000000000 | 00000 |
| M16 | 2 | 26.6 | 58.3 | 28.5 | DIN 315 | 1 | 000000000 | 00000 |
| M18 | 2.5 | 29.5 | 68.5 | 33.8 | DIN 315 | 1 | 000000000 | 00000 |
| M20 | 2.5 | 29.5 | 68.5 | 33.8 | DIN 315 | 1 | 000000000 | 00000 |
Metric Super-Corrosion-Resistant 316 Stainless Steel Wing Nuts
Made from 316 stainless steel, these wing nuts have excellent chemical resistance and can be used in saltwater environments. The wings provide more leverage for greater torque while tightening than knurled-head thumb nuts.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Base Dia., mm | Wd., mm | Ht., mm | Specifications Met | Pkg. Qty. | Pkg. | |
316 Stainless Steel | ||||||||
| M3 | 0.5 | 8 | 19.5 | 10 | DIN 315 | 10 | 000000000 | 000000 |
| M4 | 0.7 | 8 | 19.5 | 10 | DIN 315 | 10 | 000000000 | 00000 |
| M5 | 0.8 | 10.3 | 23 | 12 | DIN 315 | 10 | 000000000 | 00000 |
| M6 | 1 | 13 | 26.3 | 12.7 | DIN 315 | 5 | 000000000 | 0000 |
| M8 | 1.25 | 15.25 | 30.1 | 15.1 | DIN 315 | 5 | 000000000 | 00000 |
| M10 | 1.5 | 18 | 34.93 | 18.3 | DIN 315 | 1 | 000000000 | 0000 |
| Each | ||||||||
| M12 | 1.75 | 22.5 | 49.4 | 22.3 | DIN 315 | __ | 000000000 | 0000 |
| M14 | 2 | 26 | 52.7 | 30.8 | DIN 315 | __ | 000000000 | 00000 |
| M16 | 2 | 26.6 | 58.3 | 30.8 | DIN 315 | __ | 000000000 | 00000 |
Metric Steel and Iron Wing Nuts
These nuts have wings that provide more leverage for greater torque while tightening than knurled-head thumb nuts.
Zinc-plated wing nuts are corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Base Dia., mm | Wd., mm | Ht., mm | Specifications Met | Pkg. Qty. | Pkg. | |
Style 1 | ||||||||
Zinc-Plated Steel—Class 5 | ||||||||
| M3 | 0.5 | 10.9 | 23.1 | 11.9 | DIN 315 | 25 | 000000000 | 00000 |
| M4 | 0.7 | 8 | 17.6 | 8.6 | DIN 315 | 50 | 000000000 | 00000 |
| M5 | 0.8 | 10.3 | 22.5 | 11 | DIN 315 | 25 | 000000000 | 0000 |
| M6 | 1 | 12.7 | 27.8 | 13.6 | DIN 315 | 25 | 000000000 | 0000 |
| M8 | 1.25 | 13.8 | 30.3 | 14.8 | DIN 315 | 20 | 000000000 | 0000 |
| M10 | 1.5 | 16.5 | 36.2 | 17.7 | DIN 315 | 10 | 000000000 | 0000 |
| M12 | 1.75 | 22.5 | 49.4 | 24.1 | DIN 315 | 5 | 000000000 | 0000 |
Style 2 | ||||||||
Zinc-Plated Steel | ||||||||
| M6 | 1 | 12.7 | 34.9 | 15.9 | __ | 5 | 000000000 | 00000 |
| M8 | 1.25 | 12.7 | 36.5 | 17.5 | __ | 5 | 000000000 | 00000 |
| M16 | 2 | 26.99 | 69.9 | 30.2 | __ | 1 | 000000000 | 0000 |
Zinc-Plated Iron | ||||||||
| M5 | 0.8 | 9.53 | 28.6 | 12.7 | __ | 5 | 000000000 | 00000 |
| M10 | 1.5 | 16 | 41.3 | 20.6 | __ | 1 | 000000000 | 0000 |
Style 3 | ||||||||
Zinc-Plated Steel | ||||||||
| M6 | 1 | 16 | 27 | 17.5 | __ | 5 | 000000000 | 00000 |
| M6 | 1 | 19.05 | 25.4 | 11.9 | __ | 5 | 000000000 | 00000 |
| M8 | 1.25 | 22.23 | 41.3 | 25.4 | __ | 5 | 000000000 | 00000 |
| M10 | 1.5 | 22.23 | 41.3 | 25.4 | __ | 1 | 000000000 | 0000 |
Style 4 | ||||||||
Steel | ||||||||
| M8 | 1.25 | 24.5 | 76.2 | 19.1 | __ | 1 | 000000000 | 0000 |
| M10 | 1.5 | 24.5 | 76.2 | 19.1 | __ | 1 | 000000000 | 0000 |
| M12 | 1.75 | 24.5 | 76.2 | 19.1 | __ | 1 | 000000000 | 0000 |
Zinc-Plated Steel | ||||||||
| M8 | 1.25 | 24.5 | 76.2 | 19.1 | __ | 1 | 000000000 | 0000 |
| M10 | 1.5 | 24.5 | 76.2 | 19.1 | __ | 1 | 000000000 | 0000 |
| M12 | 1.75 | 24.5 | 76.2 | 19.1 | __ | 1 | 000000000 | 0000 |
Style 5 | ||||||||
Zinc-Plated Steel—Class 5 | ||||||||
| M4 | 0.7 | 8 | 20 | 10.5 | DIN 315 | 10 | 000000000 | 0000 |
| M5 | 0.8 | 11 | 26 | 13 | DIN 315 | 10 | 000000000 | 0000 |
| M6 | 1 | 13 | 33 | 17 | DIN 315 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 16 | 39 | 20 | DIN 315 | 5 | 000000000 | 0000 |
| M10 | 1.5 | 20 | 51 | 25 | DIN 315 | 5 | 000000000 | 00000 |
| M12 | 1.75 | 23 | 65 | 33.5 | DIN 315 | 1 | 000000000 | 0000 |
| M16 | 2 | 29 | 73 | 37.5 | DIN 315 | 1 | 000000000 | 00000 |
Style 6 | ||||||||
Zinc-Plated Iron | ||||||||
| M14 | 2 | 28.6 | 114.3 | 47.6 | __ | 1 | 000000000 | 0000 |
| M16 | 2 | 28.6 | 114.3 | 47.6 | __ | 1 | 000000000 | 00000 |
| M16 | 2 | 44.45 | 203.2 | 79.4 | __ | 1 | 000000000 | 00000 |
| M20 | 2.5 | 28.6 | 114.3 | 47.6 | __ | 1 | 000000000 | 00000 |
Style 7 | ||||||||
Zinc-Plated Steel | ||||||||
| M6 | 1 | 22.22 | 38.1 | 14.3 | __ | 1 | 000000000 | 0000 |
| M8 | 1.25 | 22.22 | 38.1 | 14.3 | __ | 1 | 000000000 | 0000 |
Metric Plastic Wing Nuts
Made from nylon 6/6, these wing nuts are chemical resistant, nonconductive, and lightweight. The wings provide more leverage for greater torque while tightening than knurled-head thumb nuts.
For technical drawings and 3-D models, click on a part number.
Sanitary Spade-Head Thumb Nuts
Cover and protect threads in sanitary environments, such as food-processing or pharmaceutical plants. These thumb nuts are easily adjusted by hand, so there’s no need for tools that could contaminate or scratch equipment. Made of 316 stainless steel, they resist corrosion from frequent washdowns with harsh cleaners. They have extremely smooth surfaces, rounded edges, and no horizontal ledges—all of which help prevent bacteria from growing.
Standard thumb nuts are easier to grip than narrow thumb nuts, so they give you greater leverage for turning.
Narrow thumb nuts have a slim profile to fit into tight spaces.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Dp., mm | Base Dia., mm | Wd., mm | Ht., mm | Surface Smoothness, microinch | Each | |
316 Stainless Steel | ||||||||
Standard Profile | ||||||||
| M4 | 0.7 | 6 | 10.8 | 20 | 19 | 32 | 000000000 | 000000 |
| M5 | 0.8 | 6 | 11.8 | 21 | 21 | 32 | 000000000 | 00000 |
| M6 | 1 | 7 | 14.2 | 25 | 25 | 32 | 000000000 | 00000 |
| M8 | 1.25 | 9 | 18 | 33 | 33 | 32 | 000000000 | 00000 |
| M10 | 1.5 | 11 | 22.3 | 40 | 40 | 32 | 000000000 | 00000 |
Narrow Profile | ||||||||
| M4 | 0.7 | 6 | 9 | 9 | 20 | 32 | 000000000 | 00000 |
| M5 | 0.8 | 6 | 10 | 10 | 22 | 32 | 000000000 | 00000 |
| M6 | 1 | 7 | 12 | 12 | 22 | 32 | 000000000 | 00000 |
| M8 | 1.25 | 9 | 16 | 16 | 25 | 32 | 000000000 | 00000 |
| M10 | 1.5 | 11 | 20 | 20 | 30 | 32 | 000000000 | 00000 |