Tap threads for left-hand threaded fasteners.

Sized to cut oversized threads, these tools are often used to tap holes where the threads will shrink due to heat treatment or plating.

Use these taps on hard and abrasive material, such as heat-treated metal, nickel, and fiberglass.

Clear chips while tapping deep and hard-to-reach holes. These taps have an extra-long shank for extended reach.

The spiral flute design pulls chips back toward the tap, so chips won't accumulate in closed-end holes.

With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. A 1/4" hex shank connects them directly to tools such as drills and power screwdrivers.

Also known as cold-forming and fluteless taps, these press threads into material without cutting it, so no chips are created.

These taps are made of cobalt steel for higher strength and wear resistance than standard taps. Their flutes are designed to keep chips clear, so they don't need to be reversed to prevent buildup.

Coated with chromium carbide or titanium carbonitride (TiCN), these cobalt steel taps cut smoothly through soft material to produce accurate threads.

Create threads sized for pipe and conduit.

The spiral flutes on these pipe and conduit taps keep chips clear by drawing them back out of the hole, so there's no need to reverse the tap while cutting threads.

Produce metric threads that meet Japanese Industrial Standards.

Restore bolt, hole, pipe, and conduit threading with this set of four files.