Suitable for use with food-processing equipment, these handles are made of FDA listed materials.

For applications that require a large gripping area, these handles have a center-to-center distance of 12" or more. Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers on furniture, machines, and equipment.

Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. The grip is offset from the mounting surface so there's room to fully grasp the handle.

Thread screws through holes from the back of your surface into the handle to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. These handles fit into a cutout, so they’re flush with the mounting surface.

These handles provide a stronger connection than those attached with screws or nuts. They fit into a cutout, so they are flush with the mounting surface. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Mount these pulls to the edge of drawers, panels, and doors. When closed, only the fingertip grip is visible.

Thread these sanitary knobs into holes so you can open doors and drawers in hygienic environments.

Mount these knobs in a cutout to keep them out of the way when not in use. Push the grip to extend, and push it again to recess. Use these knobs to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Identify equipment controls and components at a glance by their color. Also known as clamping handles, use these handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

For fast clamping anywhere along a threaded rod, press the button to slide the handle into position; release the button to secure. These handles are also known as clamping handles.

Use these handles for applications involving frequent positioning, tightening, and holding adjustments near food processing lines without the risk of contaminating the food. These handles are also known as clamping handles.

With a surface resistivity of 10,000 ohms, these handles reduce static electricity that can damage electronic equipment. Also known as clamping handles, use them for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

These handles are often used as grips on hand wheels or cranks to operate machinery around food processing lines without the risk of contaminating the food. Install them on a threaded stud.

Attach a ball knob to one of these shafts to create custom handles for operating machinery.

Also known as double cams, these complete cam handles have a durable, extra-large handle for clamping on fixture bases, plates, and workpieces. For fast adjustments, push down on the handle and the head applies pressure to quickly draw two parts together.

Use these handles for quick assembly and disassembly. Their offset grip provides leverage, making them a good alternative to wing nuts.

Identify equipment controls and components at a glance by their color. Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Never lose these knobs—tether them to equipment to keep them where you need them. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Mount them into a threaded hole.

Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

A rubber coating provides a comfortable grip to position, tighten, and hold fixtures, equipment, and machinery. Install these knobs on a threaded stud.

Never lose these knobs—tether them to equipment to keep them where you need them. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Install them on a threaded stud.

Long shafts can thread through these knobs for mounting versatility. The knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

To build a custom knob or thumb screw, pair one of these knobs with a hex or socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Install these traditional, easy-to-grip ball knobs on a threaded stud. They're good for control levers and push-pull rods.

A rubber coating or construction provides a comfortable grip. Use these knobs to control devices with round or D-shaped shafts and view settings at a glance with a pointer.

Sets include assorted keys with long shafts that reach into tight spots. The plastic-covered handles provide a good grip for your whole hand.

Sets include an assortment of short keys that fit in tight spaces where others can't.

These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t.

These assorted keys have a textured grip that provides comfort, slip resistance, and maximum torque. They have a long shaft for reaching into tight spots to turn fasteners.

These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t. The textured grip provides comfort, slip resistance, and maximum torque.

The economical choice, these sets include an assortment of keys with a simple loop handle. The long shaft reaches into tight spots and the T-handle provides a good grip for your whole hand when turning fasteners.

These sets include an assortment of keys with a ball end on the long shaft, which allows angled entry to turn screws in hard-to-reach areas. The short shaft provides additional torque.

These assorted keys have an extra-long shaft that provides access to fasteners in deep recesses. To change tips, use a hex key to loosen the set screw.

The ball-end tip has a retaining ring that grips inside the recess to hold screws in place and allows angled entry to turn fasteners in hard-to-reach areas.

The long shaft provides more reach and the short shaft more torque. Protect your stainless steel screws by using a stainless steel key. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Measure with an accuracy of ±2%.

The head is offset 45° to provide clearance for reaching over obstructions.

Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.

Lock the nose into the retracted position by pulling the ring and rotating it 90°.

These have a go gauge on one end and a no-go gauge on the other end.