Class 8 nuts are comparable in strength to Class 8.8 bolts and are suitable for fastening most machinery and equipment.

These metric nuts meet JIS (Japanese Industrial Standard) B1181.

These metric nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

About 25% stronger than medium-strength steel nuts, these nuts are comparable in strength to Class 10.9 nuts.

These metric nuts are about 20% stronger than high-strength steel nuts and are often used in heavy machinery.

About half the strength of medium-strength steel nuts, these metric nuts are for light duty fastening applications.

These nuts have good chemical resistance and may be mildly magnetic. Metric 18-8 stainless steel is also known as A2 stainless steel.

Tighten these nuts by turning them to the left; once fastened, they resist loosening from counterclockwise motion.

These metric nuts meet JIS (Japanese Industrial Standard) B1181.

These metric nuts have good chemical resistance and may be mildly magnetic.

Comparable in strength to Grade 5 steel and as resistant to chemicals and salt water as 316 stainless steel.

These metric nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.

These metric nuts resist oil, grease, and solvents (except mineral acids).

One-third the weight of steel, these metric aluminum nuts are corrosion resistant in wet evironments and nonmagnetic.

These metric nuts have a high strength-to-weight ratio and resist acids and salt water.

Useful in low-clearance applications, these metric nuts are roughly half the height of standard hex nuts, but aren’t as strong. All are 18-8 stainless steel, which is nearly as strong as steel but won’t rust in outdoor, washdown, and other corrosive environments.

Made with fine-pitch threads, vibration is less likely to loosen these metric nuts than those with coarse-pitch threads since the threads sit closer together. Also called jam nuts, they are roughly half the height of standard hex nuts, so they’re good for applications with low clearance.

These metric nuts are made of 316 stainless steel and half as tall as regular hex nuts—use them around chemicals and salt water when space is limited.

Half as thick as regular hex nuts, these nuts fit into spaces with low height clearances. They are about half as strong as medium-strength steel, and are often used for light duty applications, such as securing access panels.

These nuts are half the height of standard hex nuts, and have closely spaced threads to prevent loosening from vibration. Half as strong as medium-strength steel nuts, they are often used for light-duty applications, such as fastening signs in place.

Made from brass, these metric nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. About half the height of standard hex nuts, they are useful in low-clearance applications but have less tensile strength.

50% taller than standard hex nuts, these metric nuts provide a larger gripping area for installation with a wrench.

Stainless steel nuts have excellent corrosion resistance in most environments.

Comparable in strength to Class 12.9 bolts.

These Class 10 nuts are about 25% stronger than medium-strength steel extra-wide hex nuts.

Made from medium-strength steel with a nylon insert, these Class 8 metric locknuts are strong enough to use on most machinery and equipment that’s prone to vibration and temperature changes.

Get a grip on metric bolts exposed to vibration, wear, and changes in temperature. These metric locknuts have a nylon insert that holds onto bolts without damaging their threads.

A nylon insert keeps metric bolt threads from coming loose due to vibration, wear, and temperature swings. About 25% stronger than medium-strength steel locknuts, these nuts are made of high-strength, Class 10 steel.

Closely spaced metric threads prevent loosening from vibration. These Class 10 steel locknuts are 25% stronger than our medium-strength steel nylon-insert locknuts.

These metric locknuts have good chemical resistance.

More corrosion resistant than 18-8 stainless steel locknuts, these metric locknuts have excellent resistance to chemicals and salt water.

A conical washer acts as a spring to add tension between the nut and the material surface for easy installation and mild vibration resistance. These metric locknuts have a smooth rim to resist scratching materials when tightened.

These metric stainless steel locknuts have good chemical resistance and may be mildly magnetic.

These metric locknuts have a free-spinning tooth lock washer that grips the material surface instead of threads for easy installation and mild vibration resistance.

Threads at the top of these metric locknuts expand to grip the bolt on all sides for a stronger hold than distorted-thread locknuts.

Made from 18-8 stainless steel, these metric flex-top locknuts have good chemical resistance and may be mildly magnetic.

These metric locknuts have an irregularly shaped thread at the top of the nut that grips the bolt for a stronger hold than nylon-insert locknuts.

Secure these metric nuts by inserting a cotter pin or safety wire through the slots and a drilled hole in your bolt for mild loosening resistance. Often referred to as castle nuts.

The metric steel insert grips the threads and lifts away from the nut body when installed, isolating the insert from the nut’s load to resist spinoff caused by vibration.

Strong enough for use in most machinery and equipment, these medium-strength metric nuts have serrations on the underside of the flange. The serrations prevent the nuts from loosening in applications with mild vibration.

They're about 25% stronger than medium-strength steel flange locknuts and comparable in strength to Class 10.9 bolts.

Metric 18-8 stainless steel is also known as A2 stainless steel. These flange locknuts have good chemical resistance and may be mildly magnetic.

Metric 316 stainless steel is also known as A4 stainless steel. these flange locknuts have excellent resistance to chemicals and salt water.

Grip metric bolts more securely than nylon-insert flange locknuts—the irregularly shaped threads on these locknuts hold extra tight. They resist vibration and sudden shocks, even after multiple uses.

Also known as collar nuts, these metric nuts have a flange that distributes pressure across the surface, so you don't need a washer. Made of high-strength Class 10 steel, they’re about 25% stronger than medium-strength steel flange nuts.

These metric nuts meet JIS (Japanese Industrial Standard) B1190.

About half the strength of medium-strength steel flange nuts, use these metric nuts in light duty fastening applications, such as securing access panels.

No need for a washer—these metric medium-strength steel nuts have a flange that distributes pressure across its surface the way a washer does. Made of medium-strength, Class 8 steel, they’re suitable for fastening most machinery and equipment.

Skip the washer—these metric stainless steel nuts have a flange that does the same job, spreading pressure across its surface for a strong hold.

More corrosion resistant than 18-8 stainless steel flange nuts, these nuts have excellent resistance to chemicals and salt water.

These flange nuts have a black-oxide finish for mild corrosion resistance in dry environments.

For light duty applications, choose these metric-sized coupling nuts.

Choose these locknuts to fasten standard metric threads. They’re Class 8 steel, so they can be used in most fastening applications.

These metric-sized coupling nuts are Class 10 steel, so they’re about 25% stronger than medium-strength steel coupling nuts.

These metric coupling nuts have good chemical resistance.

More corrosion resistant than 18-8 stainless steel coupling nuts, these metric nuts have excellent resistance to chemicals and salt water.

These metric cap nuts have good chemical resistance and may be mildly magnetic.

These metric cap nuts have excellent resistance to chemicals and salt water.

These metric nuts are about half the strength of medium-strength steel cap nuts. Use them in light duty fastening applications, such as securing access panels.

Comparable in strength to Class 10.9 bolts, hese nuts are about 25% stronger than medium-strength steel cap nuts.

These metric nylon 6/6 cap nuts are chemical resistant, nonconductive, and lightweight.

Designed for sanitary conditions, these cap nuts fit into tight spaces to cover and seal exposed threads in your food processing facility.

A nylon insert on these metric nuts prevents vibration from loosening them, and a domed head protects the threads at the end of the bolt from damage and debris.

Attach these metric slip-on nuts at any point on a threaded rod for quick installation.

Adapt threaded rods from inch to metric. These adapters connect two male-threaded fasteners, so you can change the gender of a mating part or increase or decrease its thread size. The hex-shaped body fits into the head of a standard wrench.

Increase or decrease metric thread size from one male-threaded part to another. Commonly used to connect two differently sized threaded rods, they have a hex-shaped body, so you can tighten them with a standard wrench.