McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    58 Products

    Shim Stock

    Image of Product. Front orientation. Shim Stock. Sold Individually.
    Cut into custom shapes to create shims that suit your needs. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    18-8 Stainless Steel—The choice for wet and outdoor areas because it resists rust. However, it will corrode or pit when exposed to salt water and chemicals.
    Carbon Steel—Best for dry areas since moisture will cause it to rust.
    Temper Rating—Choose half hard to create shims that you’ll need to bend or shape. Opt for full hard to make stronger shims that will maintain their shape under loads.
    Certificate
    Thk.,
    mm
    Thk. Tolerance,
    mm
    Temper
    Rating
    Type
    Form
    Specs. Met
    Form
    Each
    18-8 Stainless Steel
     
    150 mm Wide × 1,250 mm Long
    0.05-0.0025 to 0.0025Full HardMaterial CertificatePaperASTM A666Roll95055K11000000
    0.1-0.005 to 0.005Full HardMaterial CertificatePaperASTM A666Roll95055K1300000
    0.15-0.0075 to 0.0075Full HardMaterial CertificatePaperASTM A666Roll95055K1500000
    0.2-0.01 to 0.01Full HardMaterial CertificatePaperASTM A666Roll95055K1700000
    0.25-0.0125 to 0.0125Full HardMaterial CertificatePaperASTM A666Roll95055K1900000
    0.3-0.015 to 0.015Full HardMaterial CertificatePaperASTM A666Roll95055K2100000
    0.4-0.02 to 0.02Full HardMaterial CertificatePaperASTM A666Roll95055K2300000
    0.5-0.025 to 0.025Full HardMaterial CertificatePaperASTM A666Roll95055K2500000
    0.65-0.0325 to 0.0325Full HardMaterial CertificatePaperASTM A666Roll95055K2700000
    0.8-0.04 to 0.04Full HardMaterial CertificatePaperASTM A666Roll95055K2900000
     
    Carbon Steel
     
    150 mm Wide × 2,500 mm Long
    0.05-0.0025 to 0.0025Full HardMaterial CertificatePaperASTM A109, Fed. Spec. QQ-S-698Roll95085K1100000
    0.1-0.005 to 0.005Full HardMaterial CertificatePaperASTM A109, Fed. Spec. QQ-S-698Roll95085K1300000
    0.15-0.0075 to 0.0075Full HardMaterial CertificatePaperASTM A109, Fed. Spec. QQ-S-698Roll95085K1500000
    0.2-0.01 to 0.01Full HardMaterial CertificatePaperASTM A109, Fed. Spec. QQ-S-698Roll95085K1700000
    0.25-0.0125 to 0.0125Full HardMaterial CertificatePaperASTM A109, Fed. Spec. QQ-S-698Roll95085K1900000
    0.3-0.015 to 0.015Full HardMaterial CertificatePaperASTM A109, Fed. Spec. QQ-S-698Roll95085K2100000
    0.4-0.02 to 0.02Full HardMaterial CertificatePaperASTM A109, Fed. Spec. QQ-S-698Roll95085K2300000
    0.5-0.025 to 0.025Full HardMaterial CertificatePaperASTM A109, Fed. Spec. QQ-S-698Roll95085K2500000
    0.65-0.0325 to 0.0325Full HardMaterial CertificatePaperASTM A109, Fed. Spec. QQ-S-698Roll95085K2700000
    0.8-0.04 to 0.04Full HardMaterial CertificatePaperASTM A109, Fed. Spec. QQ-S-698Roll95085K2900000
     

    Finish-Your-Own Washers

    Punch a hole in these washers to create a custom inner diameter for uncommon screw sizes. Washers take the pressure off screws and nut to protect your mounting surface.
    Stainless SteelAbout Stainless Steel
    Image of Product. Bottom orientation. Washers. Finish-Your-Own Washers.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these washers resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these washers won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Material Certificate—Washers include a report with a traceable lot number.
    OD,
    mm
    Thk., mm
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    6.01.4 to 1.810093274A260000000
    7.01.4 to 1.85093274A2700000
    8.01.4 to 1.85093274A2800000
    9.01.4 to 1.85093274A29000000
    10.01.4 to 1.85093274A31000000
    11.01.4 to 1.8Material Certificate5093274A32000000
    12.01.4 to 1.85093274A33000000
    13.01.4 to 1.85093274A34000000
    14.01.4 to 1.85093274A35000000
    15.01.4 to 1.85093274A36000000
    16.01.4 to 1.85093274A37000000
    17.01.4 to 1.85093274A38000000
    18.01.4 to 1.82593274A3900000
    19.01.4 to 1.8Material Certificate2593274A41000000
    20.01.4 to 1.82593274A42000000
    21.01.4 to 1.82593274A43000000
    22.01.4 to 1.82593274A44000000
    23.01.4 to 1.82593274A45000000
    24.01.4 to 1.81093274A4600000
     
    Super-Corrosion-Resistant 316 Stainless Steel
    6.01.4 to 1.810093274A63000000
    7.01.4 to 1.85093274A64000000
    8.01.4 to 1.85093274A65000000
    9.01.4 to 1.85093274A66000000
    10.01.4 to 1.85093274A67000000
    11.01.4 to 1.8Material Certificate5093274A68000000
    12.01.4 to 1.85093274A69000000
    13.01.4 to 1.8Material Certificate5093274A71000000
    14.01.4 to 1.85093274A72000000
    15.01.4 to 1.85093274A73000000
    16.01.4 to 1.85093274A74000000
    17.01.4 to 1.82593274A75000000
    18.01.4 to 1.82593274A76000000
    19.01.4 to 1.82593274A77000000
    20.01.4 to 1.82593274A78000000
    21.01.4 to 1.82593274A79000000
    22.01.4 to 1.8Material Certificate2593274A81000000
    23.01.4 to 1.81093274A82000000
    24.01.4 to 1.81093274A83000000
     
    back to top