Use where high loads and speeds are not required.

Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.

Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts.

Use these bearings for frequent starts and stops in high-load applications.

Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Good for underwater applications, these bearings won’t swell or warp when wet.

Also known as Oilite® bearings.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Choose the ID, OD, and length you need.

Made of aluminum, these spacers are lightweight and mildly corrosion resistant.

These spacers have excellent wear and abrasion resistance. Exposure to moisture may cause them to expand.

Stainless steel coupling nuts have excellent corrosion resistance in most environments.

These 18-8 stainless steel inserts have better corrosion resistance than aluminum inserts and may be mildly magnetic.

Use these sleeves with compression nuts and fittings, sometimes called bite fittings, to create a strong seal on steel tubing. They are also known as ferrules.

Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

Use these sleeves with brass compression nuts and fittings to create a seal on plastic and rubber tubing.