Thread Type Thread Type |
|---|
|
Clip-On Nut Profile Clip-On Nut Profile |
|---|
 |  |
| With Barrel | With Floating Hex Nut |
For Maximum Panel Thickness For MaximumPanel Thickness |
|---|
|
Finish Finish |
|---|
|
Material Material |
|---|
|
Distance from Center of Hole to Edge (A) Distance from Centerof Hole to Edge (A) |
|---|
|
|
For Minimum Panel Thickness For MinimumPanel Thickness |
|---|
|
For Use With For Use With |
|---|
|
Thread Spacing Thread Spacing |
|---|
|
Thread Fit Thread Fit |
|---|
|
For Shaft Diameter For Shaft Diameter |
|---|
Ring OD Ring OD |
|---|
About Nuts, Materials, and Finishes
More
Metric No-Slip Clip-On Barrel Nuts
A barrel with multiple threads ensures secure thread engagement. Also known as U-style clip-on nuts, these nuts firmly clip onto the edge of panels and stay secure.
Zinc-plated steel clip-on nuts are corrosion resistant in wet envrionments.
Black-phosphate steel clip-on nuts are mildly corrosion resistant in dry environments.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||
|---|---|---|---|---|---|---|
| Size | Pitch, mm | For Panel Thick., mm | Distance from Ctr. of Hole to Edge (A), mm | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||
M4 | 0.7 | 0.6 to 3.8 | 9.5 | 15 | 000000000 | 000000 |
| M4.2 | 1.4 | 0.5 to 2 | 10 | 15 | 000000000 | 0000 |
| M4.2 | 1.4 | 0.7 to 3.8 | 9.5 | 10 | 000000000 | 00000 |
| M4.2 | 1.4 | 0.7 to 3.8 | 15 | 5 | 000000000 | 0000 |
| M5 | 0.8 | 0.5 to 1.5 | 11.5 | 10 | 000000000 | 00000 |
| M6 | 1 | 2 to 5 | 14.5 | 5 | 000000000 | 0000 |
| M6 | 1 | 3.4 to 6.3 | 14.5 | 10 | 000000000 | 00000 |
| M8 | 1.25 | 1.5 to 5.5 | 14.5 | 20 | 000000000 | 00000 |
| M10 | 1.5 | 1.5 to 5.5 | 28 | 5 | 000000000 | 00000 |
Black-Phosphate Steel | ||||||
| M4 | 0.7 | 0.8 to 4 | 13.5 | 25 | 000000000 | 0000 |
| M5 | 0.8 | 0.6 to 3.8 | 11 | 25 | 000000000 | 00000 |
| M5 | 0.8 | 0.8 to 4 | 15.8 | 25 | 000000000 | 00000 |
| M6 | 1 | 0.8 to 4 | 12 | 25 | 000000000 | 00000 |
| M6 | 1 | 0.8 to 4 | 13.5 | 25 | 000000000 | 0000 |
| M6 | 1 | 0.8 to 4 | 19.5 | 25 | 000000000 | 00000 |
| M6 | 1 | 3.4 to 6.3 | 13.5 | 10 | 000000000 | 0000 |
| M6 | 1 | 4.3 to 5.6 | 21 | 5 | 000000000 | 0000 |
| M6.3 | 1 | 0.8 to 4 | 13.5 | 25 | 000000000 | 00000 |
| M8 | 1.25 | 0.8 to 4 | 14.5 | 25 | 000000000 | 00000 |
| M8 | 1.25 | 0.8 to 4.5 | 20 | 25 | 000000000 | 00000 |
| M8 | 1.25 | 1.7 to 5.5 | 28.5 | 5 | 000000000 | 00000 |
| M8 | 1.25 | 4 to 7 | 21 | 10 | 000000000 | 00000 |
| M10 | 1.5 | 1 to 6 | 19 | 10 | 000000000 | 0000 |
Metric Clip-On Nuts for Flanged Edges
--11177024b411582304949-p9@halfx_637181330299885752.png?ver=imagenotfound)
Slide these nuts on the edge of a panel and position them by hand. Also known as G-style clip-on nuts, they have threads that float inside the retainer so you can install a bolt at a slight angle to align off-center parts. A zinc plating provides corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||
|---|---|---|---|---|---|---|
| Size | Pitch, mm | For Panel Thick., mm | Distance from Ctr. of Hole to Edge (A), mm | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||
| M5 | 0.8 | 1.75 to 2 | 7.23 | 10 | 000000000 | 00000 |
Metric Round Push Nuts
With flexible teeth that slide smoothly over threads of any pitch, these push nuts can be used as a standalone nut for light-duty applications or as a jam nut to keep hex nuts and bolts securely fastened. All have a finish that resists corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Push Nuts | Installation Tools | ||||||
|---|---|---|---|---|---|---|---|
| For Screw Size | OD, mm | Ht., mm | Pkg. Qty. | Pkg. | Each | ||
Zinc-Plated Steel | |||||||
| M5 | 11 | 1.7 | 100 | 000000000 | 00000 | 000000000 | 000000 |
| M6 | 13 | 1.9 | 100 | 000000000 | 0000 | 000000000 | 00000 |
| M6 | 17 | 2 | 100 | 000000000 | 00000 | 000000000 | 00000 |
| M8 | 16 | 2 | 100 | 000000000 | 0000 | 000000000 | 00000 |
| M12 | 21 | 3.2 | 50 | 000000000 | 0000 | 000000000 | 00000 |
Black-Phosphate Steel | |||||||
| M10 | 20 | 2.3 | 50 | 000000000 | 0000 | 000000000 | 00000 |
| M14 | 25 | 3.2 | 50 | 000000000 | 0000 | 000000 | 00 |
Steel Snap-In Nuts
Snap these nuts into square holes in thin material. Threads float inside the retainer so you can install a bolt at a slight angle to align off-center parts. Mounting legs expand to lock the fastener in place. Install them by hand or with pliers.
Zinc-plated steel nuts resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Stainless Steel Snap-In Nuts
These nuts have good chemical resistance and may be mildly magnetic. Snap them into square holes in thin material. Threads float inside the retainer so you can install a bolt at a slight angle to align with off-center parts. Mounting legs expand to lock the fastener in place. They can be installed by hand or with pliers.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Pitch | For Panel Thick. | Square Hole Size | Wd. | Head Ht. | Pkg. Qty. | Pkg. | |
Metric 18-8 Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| M5 | 0.8mm | 0.635mm to 1.6mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
| M5 | 0.8mm | 1.626mm to 2.667mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M5 | 0.8mm | 2.362mm to 3.2mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M5 | 0.8mm | 3.175mm to 3.962mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 0.635mm to 1.6mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 1.626mm to 2.667mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 2.362mm to 3.2mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 3.175mm to 3.962mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
Metric Steel Slip-On Twist-Close Nuts
These nuts can be attached at any point on a threaded rod for quick installation. Swivel the nut open and position it on the threaded rod, then twist closed to secure. They're zinc plated to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Push-On External Retaining Rings
No groove required—press these rings onto the end of a shaft. Use them on unhardened shafts that are softer than the push ring. The ring bites into the metal to form an interference grip. Styles A, B, and C have teeth that dig into the shaft material, so expect minor scratching. Use a push nut installation tool (sold separately) to install rings, or install them manually.
1050 spring steel and 1060-1090 spring steel rings are an economical choice with good strength. A black finish is the result of a heat treatment to darken them—making them ideal for blending into dark backgrounds. However, these rings will rust if exposed to moisture. Black-phosphate finish is mildly corrosion resistant in dry environments, while a zinc-plated finish is corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
Ring | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Style | For OD, mm | OD, mm | Thick., mm | Ht., mm | Min. Installation Dp., mm | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
Black-Phosphate 1060-1090 Spring Steel | ||||||||||
| A | 3 | 8 | 0.25 | __ | 1.5 | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 4 | 9 | 0.25 | __ | 2 | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 5 | 10 | 0.25 | __ | 2 | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 6 | 11 | 0.25 | __ | 2.5 | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 7 | 12 | 0.25 | __ | 2.5 | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 8 | 13 | 0.25 | __ | 2.5 | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 9 | 14 | 0.3 | __ | 2.5 | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 10 | 16 | 0.3 | __ | 3 | Rockwell C45 | Magnetic | 100 | 000000000 | 0000 |
| A | 12 | 18 | 0.3 | __ | 3 | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 14 | 20.5 | 0.3 | __ | 3 | Rockwell C45 | Magnetic | 100 | 000000000 | 00000 |
| A | 15 | 23 | 0.5 | __ | 3 | Rockwell C45 | Magnetic | 25 | 000000000 | 0000 |
| A | 16 | 24.5 | 0.4 | __ | 3 | Rockwell C45 | Magnetic | 50 | 000000000 | 0000 |
| A | 17 | 26 | 0.5 | __ | 3.5 | Rockwell C45 | Magnetic | 25 | 000000000 | 0000 |
| A | 18 | 27 | 0.4 | __ | 3.5 | Rockwell C45 | Magnetic | 50 | 000000000 | 0000 |
| A | 20 | 29 | 0.5 | __ | 3.5 | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| A | 22 | 31 | 0.5 | __ | 3.5 | Rockwell C45 | Magnetic | 50 | 000000000 | 00000 |
| A | 25 | 34 | 0.5 | __ | 4 | Rockwell C45 | Magnetic | 25 | 000000000 | 0000 |
Black 1060-1090 Spring Steel | ||||||||||
| C | 1.5 | 5 | __ | 0.7 | 1.5 | Rockwell C47 | Magnetic | 100 | 000000000 | 0000 |
| C | 2 | 7 | __ | 1.2 | 2 | Rockwell C47 | Magnetic | 200 | 000000000 | 00000 |
| C | 3 | 10.5 | __ | 1.5 | 2.5 | Rockwell C47 | Magnetic | 100 | 000000000 | 0000 |
| C | 3.5 | 11 | __ | 1.6 | 2.5 | Rockwell C47 | Magnetic | 100 | 000000000 | 0000 |
| C | 4 | 12 | __ | 1.7 | 2.5 | Rockwell C47 | Magnetic | 100 | 000000000 | 0000 |
| C | 5 | 14 | __ | 2 | 3 | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 6 | 16 | __ | 1.8 | 3.5 | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 7 | 17 | __ | 2.2 | 3.5 | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 8 | 18 | __ | 2.3 | 3.5 | Rockwell C47 | Magnetic | 100 | 000000000 | 00000 |
| C | 10 | 20 | __ | 2.2 | 3.5 | Rockwell C47 | Magnetic | 25 | 000000000 | 0000 |
Black-Phosphate 1050 Spring Steel | ||||||||||
| B | 4 | 11.1 | __ | 1.5 | 6.5 | Rockwell C38 | Magnetic | 100 | 000000000 | 00000 |
| B | 5 | 11.1 | __ | 1.5 | 6.5 | Rockwell C38 | Magnetic | 100 | 000000000 | 00000 |
| B | 8 | 15.9 | __ | 1.8 | 6.5 | Rockwell C38 | Magnetic | 50 | 000000000 | 0000 |
Zinc-Plated 1050 Spring Steel | ||||||||||
| B | 6 | 13.5 | __ | 1.8 | 6.5 | Rockwell C38 | Magnetic | 100 | 000000000 | 00000 |
Push Nut Installation Tools
Push nuts and retaining rings over threaded fasteners and shafts. These tools have a magnetized tip so nuts don't fall off as you slide them on.
Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Thread Size | Bolt Clearance | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Fastener-Holding Mechanism | Each | |
| 5/64", 2 mm | No. 0, M2 | 13/16" | 3 1/2" | 2 1/4" | 1/4" | Steel | Plastic | Magnet | 000000000 | 000000 |
| 3/32", 2.5 mm | No. 2, M2.5, M2.6 | 1 1/8" | 3 1/2" | 2 1/4" | 1/4" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 1/8", 3 mm | No. 4, M3, M3.5 | 1 1/2" | 3 1/2" | 2 1/4" | 5/16" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 5/32", 4 mm | No. 6, M4 | 2 1/2" | 3 1/2" | 2 1/4" | 7/16" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 3/16", 4.5 mm | No. 8 | 2 1/2" | 3 1/2" | 2 1/4" | 1/2" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 7/32", 5 mm | No. 10, M5 | 2 1/2" | 3 1/2" | 2 1/4" | 1/2" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 15/64", 6 mm | No. 12, M6 | 2 1/2" | 3 1/2" | 2 1/4" | 1/2" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 1/4", 7 mm | 1/4" | 3" | 4" | 2 3/4" | 9/16" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 5/16", 8 mm | 5/16", M8 | 3" | 4" | 2 3/4" | 11/16" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 3/8", 10 mm | 3/8", M10 | 3" | 5" | 3 3/4" | 7/8" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 7/16", 11 mm | 7/16" | 3" | 5" | 3 3/4" | 15/16" | Steel | Plastic | Magnet | 000000000 | 00000 |
| 1/2", 12 mm, 13 mm | 1/2", M12 | 3" | 5" | 3 3/4" | 1" | Steel | Plastic | Magnet | 000000000 | 00000 |