A black-phosphate finish provides mild corrosion resistance.

These inserts are the most corrosion-resistant thread-locking inserts we offer.

Made of 18-8 stainless steel, these inserts have good corrosion resistance.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.

A dry film keeps the screw from sticking or binding in these inserts during installation.

Assortments include various sizes of helical inserts and a tap, a drill bit, and an installation tool for each thread size.

Kits include helical inserts, a tap, and an installation tool.

Install these inserts into plastic parts to create a secure base for fasteners.

The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.

Made from brass, these inserts are electrically conductive, nonmagnetic, and have good corrosion resistance.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.

These 18-8 stainless steel inserts have better corrosion resistance than aluminum inserts and may be mildly magnetic.

These 18-8 stainless steel inserts have excellent resistance to chemicals and may be mildly magnetic.

The flange keeps these inserts from being pulled through a hole and provides a load bearing surface.

The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water.

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

The most corrosion resistant twist-resistant rivet nuts we offer, these stand up to chemicals.

The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

Press these metric nuts into a drilled or punched hole with an arbor press or similar pressure tool.

A flat hex head sits flush against the material surface for use in low-clearance applications.

A smooth base on these metric nuts provides more contact with the mating surface than weld nuts with projections

Weld these nuts to stainless steel surfaces.

You can weld these metric nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold.

A ribbed-shaped body holds the nut in place so it won't move when tightening a screw. Assortments contain rivet nuts, mandrels, nosepieces, and a plier-style installation tool.