MIL-R-24243/1E-A804 Rivets

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Tensile Strength Tensile Strength

	Shear Strength Shear Strength

	Finish Finish

Chromate Conversion
Coated

Chrome Plated

Copper Plated

Neoprene Rubber Coated

Zinc Yellow-Chromate
Plated

Forward

How can we improve?

3,204 Products

Domed Head Blind Rivets

Aluminum Domed Head Blind Rivets

Made of aluminum, these blind rivets are lightweight and corrosion resistant. The domed head gives your project a finished appearance.

18-8 Stainless Steel Domed Head Blind Rivets

Made from 18-8 stainless steel, these blind rivets create a strong hold even in wet and damp areas. The domed head gives your project a finished appearance.

Zinc-Plated Steel Domed Head Blind Rivets

The zinc-plated finish provides mild corrosion resistance.

316 Stainless Steel Domed Head Blind Rivets

More corrosion resistant than 18-8 stainless steel rivets, these 316 stainless steel rivets have excellent resistance to chemicals and salt water.

Copper Domed Head Blind Rivets

Copper rivets are electrically conductive and have good corrosion resistance.

Choose-a-Color Domed Head Blind Rivets

Select a color to make your rivets stand out or blend in.

Aluminum Wide-Thickness-Range
Domed Head Blind Rivets

These rivets are lightweight and have good corrosion resistance.

18-8 Stainless Steel Wide-Thickness-Range
Domed Head Blind Rivets

18-8 stainless steel has good corrosion resistance.

Choose-a-Color Wide-Thickness-Range
Domed Head Blind Rivets

Select a color to make your rivets stand out or blend in. These rivets grip a much wider range of material thicknesses than standard blind rivets.

Miniature Domed Head Blind Rivets

Also known as micro rivets, these are our smallest-diameter rivets and are often used in electronics assembly.

Flush-Mount Blind Rivets

Aluminum Flush-Mount Blind Rivets

Lightweight and corrosion resistant, these blind rivets are made of aluminum. Install them in countersunk holes, and their angled head sits flush with the material’s surface.

18-8 Stainless Steel Flush-Mount Blind Rivets

With good strength and corrosion resistance, these 18-8 stainless steel blind rivets create a strong hold in damp and wet areas. Install them in countersunk holes, and their angled head sits flush with the material’s surface.

Nickel Flush-Mount Blind Rivets

This high-strength material has excellent corrosion resistance.

Zinc-Plated Steel Flush-Mount Blind Rivets

The zinc-plated finish provides mild corrosion resistance.

Wide-Thickness-Range Flush-Mount Blind Rivets

Grip a much wider range of material thicknesses than standard blind rivets. These are also known as multigrip rivets.

Large-Diameter Domed Head Blind Rivets

Aluminum Large-Diameter Domed Head Blind Rivets

These rivets are lightweight and have good corrosion resistance.

18-8 Stainless Steel Large-Diameter
Domed Head Blind Rivets

18-8 stainless steel has good corrosion resistance.

Zinc-Plated Steel Large-Diameter
Domed Head Blind Rivets

The zinc-plated finish provides mild corrosion resistance.

Choose-a-Color Large-Diameter
Domed Head Blind Rivets

Select a color to make your rivets stand out or blend in.

Wide-Thickness-Range Large-Diameter
Domed Head Blind Rivets

Grip a much wider range of material thicknesses compared to standard blind rivets. These are also known as multigrip rivets.

Flush-Mount-on-Both-Sides Blind Rivets

For a flush finish on both sides of the material, install these rivets in countersunk holes. Also known as pull-thru rivets, no portion of the mandrel is left behind after installation.

Domed-on-Both-Sides Blind Rivets

Create a finished look on both sides of your material with these two-piece rivets.

Sealing Blind Rivets

18-8 Stainless Steel Domed Head Sealing Blind Rivets

18-8 stainless steel has good corrosion resistance.

Aluminum Domed Head Sealing Blind Rivets

These rivets are lightweight and have good corrosion resistance.

Aluminum Domed Head Sealing
Blind Rivets with Plastic Seal

Plastic bonded to the underside of the head creates a stronger seal than metal alone. These rivets are lightweight and have good corrosion resistance.

Flush-Mount Sealing Blind Rivets

Install in a countersunk hole and the angled head sits flush with the material's surface. These are also known as countersunk blind rivets.

High-Strength Blind Rivets

Zinc-Plated Steel Domed Head
High-Strength Blind Rivets

The zinc-plated finish provides mild corrosion resistance.

18-8 Stainless Steel Domed
Head High-Strength Blind Rivets

18-8 stainless steel has good corrosion resistance.

Aluminum Domed Head High-Strength Blind Rivets

These rivets are lightweight and have good corrosion resistance.

18-8 Stainless Steel Wide-Thickness-Range
Domed Head High-Strength Blind Rivets

18-8 stainless steel has good corrosion resistance.

Zinc-Plated Steel Wide-Thickness-Range
Domed Head High-Strength Blind Rivets

The zinc-plated finish provides mild corrosion resistance.

Aluminum Wide-Thickness-Range
Domed Head High-Strength Blind Rivets

These rivets are lightweight and have good corrosion resistance.

18-8 Stainless Steel Wide-Thickness-Range
Flush-Mount High-Strength Blind Rivets

18-8 stainless steel has good corrosion resistance.

Aluminum Wide-Thickness-Range
Flush-Mount High-Strength Blind Rivets

These rivets are lightweight and have good corrosion resistance.

Large-Diameter Domed Head High-Strength Blind Rivets

A larger head diameter than standard domed head blind rivets covers irregular holes and provides extra holding power when fastening soft, thin material to a rigid backing. They're also known as large-flange blind rivets.

Blind Rivets for Soft Materials

High-Strength Blind Rivets for Soft Materials

Also known as peel-style rivets, the body splits into four legs to fasten plastic and fiberglass to thin material, such as sheet metal.

Blind Rivets for Soft Materials

Also known as bulb-style rivets, the body deforms into a bulb shape to join plastic and laminates.

Blind Rivets for Wood

An alternative to wood screws, these rivets have a grooved body that expands during installation, digging into the wood and creating a secure hold. They are for use in closed-end holes.

Plastic Blind Rivets

Corrosion resistant and nonconductive, these rivets are designed to join plastic, fiberglass, wood, and metal.

Solid Rivets

Mil. Spec. Aluminum Flush-Mount Solid Rivets

Made of heat-treated aluminum, these rivets meet MIL-C-5541.

Aluminum Flush-Mount Solid Rivets

These rivets are lightweight and have good corrosion resistance.

18-8 Stainless Steel Flush-Mount Solid Rivets

18-8 stainless steel rivets are more corrosion resistant than those made of aluminum, brass, or copper.

Brass Flush-Mount Solid Rivets

Brass rivets are electrically conductive and have good corrosion resistance.

Steel Flush-Mount Solid Rivets

An economical choice with good strength.

Steel Domed Head Solid Rivets

Aluminum Domed Head Solid Rivets

These rivets are lightweight and have good corrosion resistance.

18-8 Stainless Steel Domed Head Solid Rivets

18-8 stainless steel rivets are more corrosion resistant than those made of aluminum, brass, or copper.

Brass Domed Head Solid Rivets

More durable than copper, brass rivets are electrically conductive and have good corrosion resistance.

Copper Domed Head Solid Rivets

Copper rivets are electrically conductive and have good corrosion resistance.

18-8 Stainless Steel Flat Head Solid Rivets

18-8 stainless steel rivets are more corrosion resistant than those made of aluminum, brass, or copper.

Steel Flat Head Solid Rivets

Aluminum Flat Head Solid Rivets

These rivets are lightweight and have good corrosion resistance.

Copper Flat Head Solid Rivets

Copper rivets are electrically conductive and have good corrosion resistance.

Brass Flat Head Solid Rivets

More durable than copper, brass rivets are electrically conductive and have good corrosion resistance.

Low-Profile Flat Head Solid Rivets

Also known as tinners' rivets, these are commonly used in HVAC and other thin sheet metal applications.

Mil. Spec. Aluminum Low-Profile
Domed Head Solid Rivets

Made of heat-treated aluminum, these rivets meet MIL-C-5541.

Aluminum Low-Profile Domed Head Solid Rivets

These rivets are lightweight and have good corrosion resistance.

Steel Low-Profile Domed Head Solid Rivets

A lower head height than standard domed head rivets provides a more finished appearance.

Large-Diameter Low-Profile Domed Head Solid Rivets

For increased holding power, the head is 25% wider than standard low-profile domed head solid rivets.

Solid Rivets with Washer for Soft Material

The washer creates a large holding surface on the back of the material. Also known as belt rivets, these are used for fastening conveyor belts or leather. A special setting tool and a hammer are required for installation.

Push-In Rivets

You need access to only one side of the material to install these rivets.

Two-Piece Push-In Rivets

Access to both sides of the material is required for installation.

Reusable Push-In Rivets

A flexible shank allows these rivets to be removed and reused. You need access to only one side of the material to install.

Hollow Rivets

Also known as tubular and semi-tubular rivets, these are often used in soft material such as leather, fabric, and plastic. Installation requires access to both sides of the material and a hollow rivet tool.

Two-Piece Press-Fit Rivets

Two-Piece Press-Fit Rivets for Leather and Fabric

Also known as slam rivets, the two heads provide a finished look on both sides of your material.

Two-Piece Press-Fit Rivets for Wood

These are also known as cutlery rivets.

Pin-Drive Rivets

Hammer the pin into the body and it flares out for a secure hold. These rivets require access to only one side of the material and can be used in through-holes or closed-end holes.

Split Rivets

Nickel-Plated Steel Split Rivets

The nickel-plated finish provides good corrosion resistance.

Brass Split Rivets

Brass rivets are electrically conductive and have good corrosion resistance.

Hex-Drive Rivets

18-8 Stainless Steel Hex-Drive Rivets

18-8 stainless steel has good corrosion resistance.

Steel Hex-Drive Rivets

Locking-Collar Rivets

Also known as magna-grip lockbolts, these ribbed rivets are the strongest rivets we offer. They have the holding power to withstand excessive vibration, expansion, and contraction. Installation requires access to both sides of the material and a locking collar rivet tool.

Rivet Nuts

Steel Twist-Resistant Rivet Nuts

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

Stainless Steel Twist-Resistant Rivet Nuts

The most corrosion resistant twist-resistant rivet nuts we offer, these stand up to chemicals.

Aluminum Twist-Resistant Rivet Nuts

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

Heavy Duty Twist-Resistant Rivet Nuts

A hex-shaped body provides the highest twist resistance of any rivet nut.

Twist-Resistant Rivet Nuts for Soft Materials

Wedges under the flange lock the nut in place in soft materials such as brass and aluminum.

Sealing Screw-to-Install Rivet Nuts

The coated flange seals out moisture and prevents corrosion.

Scratch-Resistant Screw-to-Install Rivet Nuts

A PVC coating minimizes the chance of scratching the surface of your material. These rivet nuts are more corrosion resistant than zinc-plated steel rivet nuts.

Screw-to-Install Rivet Nuts

These rivet nuts are mildly corrosion resistant.

Rivet Nuts for Plastic and Composites

Once installed these rivet nuts have a large back flange that distributes the load across a broad area for a strong hold in plastic and composites.

Aluminum Rivet Nuts

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

Steel Rivet Nuts

About twice as strong as aluminum rivet nuts, these rivet nuts are zinc plated for mild corrosion resistance.

Steel Low-Profile Rivet Nuts

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

Steel Low-Profile Rivet Nuts with Installation Tool

These kits include one size of low-profile rivet nuts.

Stainless Steel Low-Profile Rivet Nuts

The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.

Aluminum Low-Profile Rivet Nuts

These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.

Insulating Rivet Nuts

A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

Thread-Sealing Closed-End Rivet Nuts

The thread area is enclosed, which prevents leakage past the threads from either side of your application.

Flange-Sealing Rivet Nuts

A PVC foam seal under the flange keeps liquids and gasses from leaking between the nut and the surrounding material.

Aligning Rivet Nuts

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

Binding Barrels and Screws

Stainless Steel Low-Profile Binding Barrels and Screws

Stainless steel binding barrels and screws have excellent corrosion resistance in most environments.

Aluminum Low-Profile Binding Barrels and Screws

One-third the weight of steel, aluminum binding barrels and screws resist corrosion in wet environments.

Extensions for Low-Profile Binding Barrels

Add length to a binding barrel.

Steel Low-Profile Binding Barrels and Screws

An unthreaded barrel allows quick assembly with a press or a hammer.

Brass Low-Profile Binding Barrels and Screws

Brass binding barrels and screws are corrosion resistant in wet environments and electrically conductive.

Plastic Press-Fit Low-Profile Binding Barrels and Caps

Plastic binding barrels and caps are chemical resistant, nonconductive, and lightweight.

Metal Press-Fit Low-Profile Binding Barrels and Caps

These barrels and caps are corrosion resistant in wet environments.

18-8 Stainless Steel Binding Barrels and Screws

These include a barrel and a screw.

18-8 Stainless Steel Binding Barrels

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 18-8 stainless steel, they are chemical resistant.

18-8 Stainless Steel Screws for Binding Barrels

Pair these screws with a barrel you already have or couple with a different barrel to create a custom fastener. Made from 18-8 stainless steel, they are chemical resistant.

Super-Corrosion-Resistant 316
Stainless Steel Binding Barrels

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

Super-Corrosion-Resistant 316 Stainless
Steel Binding Barrels and Screws

These include a barrel and a screw with an extra-wide (truss) head. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

Super-Corrosion-Resistant 316 Stainless
Steel Screws for Binding Barrels

Pair with a barrel you already have or couple with a different barrel to create a custom fastener. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

Steel Binding Barrels and Screws

These include a barrel and a screw.

Steel Binding Barrels

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. They're zinc plated to resist corrosion in wet environments.

Steel Shoulder Screws for Binding Barrels

Designed with a shoulder for the strength to handle side and shear loads.

Steel Screws for Binding Barrels

Shorter than shoulder screws for use in thin material.

Hex Drive Binding Barrels and Screws

Use these hex drive screws and binding barrels as a low-profile alternative to standard nut and bolt combinations.

Plastic Press-Fit Binding Barrels and Screws

An unthreaded barrel allows quick assembly with a press or a hammer.

Recessed Joint Clamps for Wood

Install in a cutout to create a secure joint between boards, butcher blocks, and countertops.

Binding Barrels and Screws for Wood

Create strong joints in wood and wood composite.

Dowel Nuts for Wood

Create a strong joint in a blind hole.

Flat Head Binding Barrels and Screws

Angled under the head for a flush finish in countersunk holes.

Sealing Binding Barrels and Screws

Sealed with PVC foam under the head to prevent leaks and keep contaminants out.

Tamper-Resistant Torx Binding Barrels and Screws

A tamper-resistant Torx driver is required for installation and removal.

Tamper-Resistant One-Way Binding Barrels and Screws

Install these binding barrels and screws with a standard slotted screwdriver. They require a special tool to remove.

18-8 Stainless Steel Binding Barrels
and Screws for Door Hardware

These binding barrels and screws have good chemical resistance.

Super-Corrosion-Resistant 316 Stainless Steel
Binding Barrels and Screws for Door Hardware

More corrosion resistant than 18-8 stainless steel binding barrels and screws, these have excellent resistance to chemicals and salt water.

Brass Binding Barrels and Screws for Door Hardware

Brass binding barrels and screws are corrosion resistant in wet environments and electrically conductive.

Tight-Spot Hex Head Screws

A high-strength alternative to blind rivets, use these screws when only one side of the material is accessible.

Screw Nails

Screw Nails for Metal, Plastic, and Plywood

Also known as round-head Type U drive screws.

Screw Nails for Sheet Metal

Also known as flat-head Type 21 screws.

Fastener Assortments

Rivet Assortments

Rivet Nut Assortments

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

Heavy Duty Twist-Resistant Rivet Nut Assortments

A ribbed-shaped body holds the nut in place so it won't move when tightening a screw. Assortments contain rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

Low-Profile Rivet Nut Assortments

Use these rivet nuts for light duty fastening in low-clearance applications. Assortments include rivet nuts, mandrels, and an installation tool.

Screw Nail Assortments

Fabric Fasteners

Female/Male Dual-Sided Fabric Snap Halves

Once installed, these fasteners provide a female snap half on one side of your fabric and a male snap half on the other.

Male/Male Dual-Sided Fabric Snap Halves

Once installed, these fasteners provide a male snap half on both sides of your fabric. Create a complete snap by joining each male side with a female snap half for a finished look on assembled layers of fabric.

Female Fabric Snap Halves

These female snap halves create the finished button-look of a snap. Pair them with male snap halves to create a complete snap.

Male Fabric Snap Halves

Pair these male snap halves with female snap halves to make a complete snap.

Complete Fabric Snaps

Male and female snaps are included to create complete snaps.

Complete Fabric Snap Kits

Kits include a hand punch tool with die and six complete snaps.

Blind-Rivet Style Fabric Snaps

Fasten these male snap halves to a solid surface when you only have access to one side. A blind rivet tool is required for installation.

Complete Fabric Snaps with Tapping Screw Stud

Everything you need to fasten a fabric snap to a solid surface.

Male Fabric Snap Halves with Tapping Screw Stud

Pair with a female snap half to create a complete snap.

Complete Fabric Snap with Tapping Screw Stud Kits

Kits include a hand punch tool with die and six complete snaps with tapping screw studs.

Fabric Snaps with Threaded Stud

The threaded stud installs in threaded holes.

Fabric Snaps with Drilling Screw Stud

The drilling screw stud drills its own hole.

Adhesive-Back Fabric Snaps

Peel off the backing and stick these male snap halves to flat or curved surfaces.

Turn-Button Fastener Eyelets

Create an eyelet for turn-button fastener bases.

Turn-Button Fastener Bases

Use screws to secure these bases in a solid surface.

Turn-Button Fastener Bases with Threaded Stud

Drive the threaded stud into a solid surface.

Quick-Drive Anchors for Concrete, Block, and Brick

Plastic Removable Pin-Drive
Anchors for Block and Brick

These anchors are also known as drive rivets. To install, hammer the pin into the body. Pry out the pin to remove.

Zinc Alloy Removable Pin-Drive
Anchors for Block and Brick

Also known as drive rivets, install these anchors by hammering the pin into the body. Pry out the pin to remove.

Plastic Removable Screw-Drive
Anchors for Block and Brick

These anchors are also known as drive rivets. To install, hammer the screw into the body. Unthread the screw to remove.

Zinc Alloy Removable Screw-Drive
Anchors for Block and Brick

Also known as drive rivets, install by hammering the screw into the body. Unthread the screw to remove.

Plastic Drive Anchors for Concrete

Also known as tap-in or uni-tap rivets, these anchors are barbed to resist pull out. Made from nylon, they're chemical resistant.

Washers

Washers for Blind Rivets

Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.

Square Washers for Blind Rivets

Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.

Rivet Studs

Add a stud to thin material when you only have access to one side.

Removal Tools for Blind and Solid Rivets

Attach this tool to your drill to remove all styles of domed head rivets.

Tools for Blind Rivets

Manual Tools for Blind Rivets

Squeeze the handles to install blind rivets.

Manual Tool and Blind Rivet Kits

Kits include a tool and domed and flush-mount rivets for 0.063"-0.125" and 0.188"-0.25" material thickness ranges.

Comfort-Grip Manual Tools for Blind Rivets

Contoured handles provide comfort and a secure grip.

Manual Tools for Plastic Blind Rivets

To install plastic blind rivets, squeeze the handles.

360° Swivel-Head Manual Tools for Blind Rivets

Swivel the head to install blind rivets at any angle.

Extra-Leverage Manual Tools for Blind Rivets

Long handles provide additional leverage to install large-diameter rivets.

Mandrel-Collecting Extra-Leverage
Manual Tools for Blind Rivets

A built-in receptacle collects spent mandrels.

Easy-Squeeze Manual Tools for Blind Rivets

Install rivets with 40% less force than other manual tools.

Nosepieces, Jaws, and Replacement
Parts for Blind Rivet Tools

Replace individual parts in a variety of blind rivet tools.

Economy Mandrel-Collecting
Air-Powered Tools for Blind Rivets

Use these tools for repair and maintenance work.

Mandrel-Collecting Air-Powered Tools for Blind Rivets

Designed for durability, these tools can handle the demands of high-volume production and assembly.

Vertical Air-Powered Tools for Blind Rivets

An extra-long nosepiece allows access to hard-to-reach areas.

Cordless Tools for Blind Rivets

The perfect tools for installing standard and sealing blind rivets when there's no power source nearby.

Batteries for Cordless Tools for Blind Rivets

Chargers for Cordless Tools for Blind Rivets

Tools for Hollow Rivets

One of these tools and a hammer are all you need to expand the base of hollow (tubular) and hollow-end (semi-tubular) rivets.

Tools for Solid Rivets

Rivet Setters for Air-Powered Hammers

Rivet setters are required for standard and heavy duty air-powered hammers to drive rivets.

Bucking Bars

Place against the back side of your rivet while hammering the head.

Replacement Parts for Air-Powered Hammers

Replace individual parts in a variety of Superior Pneumatic air-powered hammers.

Air-Powered Hammer and Rivet
Setter Kits for Solid Rivets

Kits include a hammer and round rivet setters.

Air-Powered Hammers for Solid Rivets

Also known as zip guns, use these air hammers with a rivet setter and a bucking bar to install solid rivets.

Tools for Solid Rivets with Washer

Set solid rivets using one of these tools and your hammer.

Manual Squeeze Tools for Solid Rivets

Squeeze to get 3,500 pounds of pressure and set solid rivets.

Air-Powered Squeeze Tools for Solid Rivets

Also known as alligator squeezers, these tools offer up to 6,000 lbs. of force to set solid rivets.

Removal Tools for Push-In Rivets

Slide these tools under the head of push-in rivets and squeeze the handles to pop the rivet out. They are also known as panel clip pliers.

Tools for Locking-Collar Rivets

These tools pull the rivet bolt tight to the collar, clinches the collar in place, and clips any excess length of the bolt.

Tools for Blind Rivets and Rivet Nuts

Generate enough force with the assistance of a self-contained hydraulic system to install blind rivets with one hand.

Rivet Nut Tools

Wrench-Driven Rivet Nut Tools

Use these tools to install most styles of rivet nuts. Use a wrench to hold the tool and a ratchet to tighten the nut.

Hand-Driven Tools for Low-Profile Rivet Nuts

Turn these tools by hand to install low-profile rivet nuts.

Lever-Style Rivet Nut Tools

Use two hands to maximize leverage when installing smooth body rivet nuts.

Lever-Style Rivet Nut Tools with Visual Stroke Indicator

Use these tools to install smooth and ribbed body rivet nuts. An indicator allows you to ensure your rivet nut installs correctly.

Air-Powered Rivet Nut Tools

Smaller and lighter than cordless and hydraulic rivet nut tools, use these to install thin-walled bulbed, ribbed, sleeve, and smooth rivet nuts.

Hydraulic/Air-Powered Rivet Nut Tools

Install all styles of rivet nuts more quickly than cordless rivet nut tools.

Plier-Style Rivet Nut Tools

Install smooth body rivet nuts.

Light Duty Plier-Style Rivet Nut Tools

Install screw-to-install rivet nuts and rivet nuts for plastic and composites.

Fabricating and Machining

Nonsparking 0.401" Round Shank Chisels
for Chiseling and Riveting Hammers

Made of aluminum-bronze that is FM approved, these chisels satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

0.401" Round Shank Chisels for
Chiseling and Riveting Hammers

0.401" Round Shank Chisel Sets
for Chiseling and Riveting Hammers

Riveting Hammers

Set solid rivets by hand. These tools are also known as paneing, setting, and seaming hammers.

Domed Head Blind Rivets

Aluminum Domed Head Blind Rivets

18-8 Stainless Steel Domed Head Blind Rivets

Zinc-Plated Steel Domed Head Blind Rivets

316 Stainless Steel Domed Head Blind Rivets

Copper Domed Head Blind Rivets

Choose-a-Color Domed Head Blind Rivets

Aluminum Wide-Thickness-RangeDomed Head Blind Rivets

18-8 Stainless Steel Wide-Thickness-RangeDomed Head Blind Rivets

Choose-a-Color Wide-Thickness-RangeDomed Head Blind Rivets

Miniature Domed Head Blind Rivets

Flush-Mount Blind Rivets

Aluminum Flush-Mount Blind Rivets

18-8 Stainless Steel Flush-Mount Blind Rivets

Nickel Flush-Mount Blind Rivets

Zinc-Plated Steel Flush-Mount Blind Rivets

Wide-Thickness-Range Flush-Mount Blind Rivets

Large-Diameter Domed Head Blind Rivets

Aluminum Large-Diameter Domed Head Blind Rivets

18-8 Stainless Steel Large-DiameterDomed Head Blind Rivets

Zinc-Plated Steel Large-DiameterDomed Head Blind Rivets

Choose-a-Color Large-DiameterDomed Head Blind Rivets

Wide-Thickness-Range Large-DiameterDomed Head Blind Rivets

Flush-Mount-on-Both-Sides Blind Rivets

Flush-Mount-on-Both-Sides Blind Rivets

Domed-on-Both-Sides Blind Rivets

Domed-on-Both-Sides Blind Rivets

Sealing Blind Rivets

18-8 Stainless Steel Domed Head Sealing Blind Rivets

Aluminum Domed Head Sealing Blind Rivets

Aluminum Domed Head SealingBlind Rivets with Plastic Seal

Flush-Mount Sealing Blind Rivets

High-Strength Blind Rivets

Zinc-Plated Steel Domed HeadHigh-Strength Blind Rivets

18-8 Stainless Steel DomedHead High-Strength Blind Rivets

Aluminum Domed Head High-Strength Blind Rivets

18-8 Stainless Steel Wide-Thickness-RangeDomed Head High-Strength Blind Rivets

Zinc-Plated Steel Wide-Thickness-RangeDomed Head High-Strength Blind Rivets

Aluminum Wide-Thickness-RangeDomed Head High-Strength Blind Rivets

18-8 Stainless Steel Wide-Thickness-RangeFlush-Mount High-Strength Blind Rivets

Aluminum Wide-Thickness-RangeFlush-Mount High-Strength Blind Rivets

Large-Diameter Domed Head High-Strength Blind Rivets

Blind Rivets for Soft Materials

High-Strength Blind Rivets for Soft Materials

Blind Rivets for Soft Materials

Blind Rivets for Wood

Blind Rivets for Wood

Plastic Blind Rivets

Plastic Blind Rivets

Solid Rivets

Mil. Spec. Aluminum Flush-Mount Solid Rivets

Aluminum Flush-Mount Solid Rivets

18-8 Stainless Steel Flush-Mount Solid Rivets

Brass Flush-Mount Solid Rivets

Steel Flush-Mount Solid Rivets

Steel Domed Head Solid Rivets

Aluminum Domed Head Solid Rivets

18-8 Stainless Steel Domed Head Solid Rivets

Brass Domed Head Solid Rivets

Copper Domed Head Solid Rivets

18-8 Stainless Steel Flat Head Solid Rivets

Steel Flat Head Solid Rivets

Aluminum Flat Head Solid Rivets

Copper Flat Head Solid Rivets

Brass Flat Head Solid Rivets

Low-Profile Flat Head Solid Rivets

Mil. Spec. Aluminum Low-ProfileDomed Head Solid Rivets

Aluminum Low-Profile Domed Head Solid Rivets

Steel Low-Profile Domed Head Solid Rivets

Large-Diameter Low-Profile Domed Head Solid Rivets

Solid Rivets with Washer for Soft Material

Solid Rivets with Washer for Soft Material

Push-In Rivets

Push-In Rivets

Two-Piece Push-In Rivets

Reusable Push-In Rivets

Hollow Rivets

Hollow Rivets

Two-Piece Press-Fit Rivets

Two-Piece Press-Fit Rivets for Leather and Fabric

Aluminum Wide-Thickness-Range
Domed Head Blind Rivets

18-8 Stainless Steel Wide-Thickness-Range
Domed Head Blind Rivets

Choose-a-Color Wide-Thickness-Range
Domed Head Blind Rivets

18-8 Stainless Steel Large-Diameter
Domed Head Blind Rivets

Zinc-Plated Steel Large-Diameter
Domed Head Blind Rivets

Choose-a-Color Large-Diameter
Domed Head Blind Rivets

Wide-Thickness-Range Large-Diameter
Domed Head Blind Rivets

Aluminum Domed Head Sealing
Blind Rivets with Plastic Seal

Zinc-Plated Steel Domed Head
High-Strength Blind Rivets

18-8 Stainless Steel Domed
Head High-Strength Blind Rivets

18-8 Stainless Steel Wide-Thickness-Range
Domed Head High-Strength Blind Rivets

Zinc-Plated Steel Wide-Thickness-Range
Domed Head High-Strength Blind Rivets

Aluminum Wide-Thickness-Range
Domed Head High-Strength Blind Rivets

18-8 Stainless Steel Wide-Thickness-Range
Flush-Mount High-Strength Blind Rivets

Aluminum Wide-Thickness-Range
Flush-Mount High-Strength Blind Rivets

Mil. Spec. Aluminum Low-Profile
Domed Head Solid Rivets

Super-Corrosion-Resistant 316
Stainless Steel Binding Barrels

Super-Corrosion-Resistant 316 Stainless
Steel Binding Barrels and Screws

Super-Corrosion-Resistant 316 Stainless
Steel Screws for Binding Barrels

18-8 Stainless Steel Binding Barrels
and Screws for Door Hardware

Super-Corrosion-Resistant 316 Stainless Steel
Binding Barrels and Screws for Door Hardware