Clear All
Specifications Met Specifications Met | Show |
|---|
Specifications Met Specifications Met | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
System of Measurement System of Measurement |
|---|
|
ID ID |
|---|
OD OD |
|---|
Shape Shape |
|---|
 |  |
| Ring | Round Tube |
Plain Bearing Type Plain Bearing Type |
|---|
 | Sleeve |
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
Hardness Rating Hardness Rating |
|---|
|
Shank Thread Size Shank Thread Size |
|---|
Fabrication Fabrication |
|---|
|
Lubrication Lubrication |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Shell Material Shell Material |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Rod Ends
More
About Plain Bearings
More
About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
High-Load Dry-Running Sleeve Bearings
PTFE Plastic Bearings
with 17-4 PH Stainless
Steel Shell
with 17-4 PH Stainless
Steel Shell
A metal shell adds strength.
PTFE bearings with 17-4 PH stainless steel shell have the highest load capacity of any sleeve bearing we offer. They handle shock loads and are chemical resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings with 17-4 PH Stainless Steel Shell | ||||||
|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||
| 1/2" | 1/4" | 1,900 lbs. @ 40 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 000000 | 000000 |
| 1/2" | 3/8" | 2,850 lbs. @ 40 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 000000 | 00000 |
| 1/2" | 1/2" | 3,800 lbs. @ 40 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 000000 | 00000 |
| 1/2" | 9/16" | 4,250 lbs. @ 40 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 000000 | 00000 |
For 1/2" Shaft Dia. | ||||||
| 5/8" | 3/16" | 1,400 lbs. @ 40 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 000000 | 00000 |
| 5/8" | 11/32" | 2,600 lbs. @ 40 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 000000 | 00000 |
| 5/8" | 3/8" | 2,850 lbs. @ 40 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 000000 | 00000 |
| 5/8" | 7/16" | 3,300 lbs. @ 40 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 000000 | 00000 |
| 5/8" | 7/8" | 6,650 lbs. @ 40 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 000000 | 00000 |
For 5/8" Shaft Dia. | ||||||
| 13/16" | 5/8" | 9,500 lbs. @ 20 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 00000 |
| 13/16" | 1 1/4" | 19,050 lbs. @ 20 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 000000 |
For 11/16" Shaft Dia. | ||||||
| 7/8" | 1" | 15,250 lbs. @ 20 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 000000 |
For 3/4" Shaft Dia. | ||||||
| 15/16" | 3/4" | 11,450 lbs. @ 20 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 00000 |
For 7/8" Shaft Dia. | ||||||
| 1 1/16" | 1" | 15,250 lbs. @ 20 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 000000 |
For 1" Shaft Dia. | ||||||
| 1 3/16" | 5/8" | 9,500 lbs. @ 20 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 000000 |
| 1 3/16" | 3/4" | 11,450 lbs. @ 20 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 000000 |
| 1 3/16" | 1 1/8" | 17,150 lbs. @ 20 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 000000 |
For 1 1/4" Shaft Dia. | ||||||
| 1 7/16" | 1" | 30,550 lbs. @ 10 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 000000 |
| 1 7/16" | 1 1/2" | 45,800 lbs. @ 10 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 000000 |
Mil. Spec. Ball Joint Rod Ends
Made of cadmium-plated steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They provide moderate corrosion resistance. All have a PTFE liner that allows smooth ball rotation and eliminates the need for lubrication. Liner meets SAE AS81820.
Rod ends with an oversized shank have a shank that is one size larger than the ID to handle greater stress.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Specifications Met | Material | Choose a Shank Thread Direction | Each | |
Ball Joints | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5/16"-24 | 5/16" | 14° | 7/8" | 7/16" | 1 7/8" | 1 3/16" | 7,150 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 0000000 | |
| 3/8"-24 | 3/8" | 8° | 1" | 1/2" | 1 15/16" | 1 3/16" | 8,550 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 7/16"-20 | 7/16" | 10° | 1 1/8" | 9/16" | 2 1/8" | 1 1/4" | 12,000 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 1/2"-20 | 1/2" | 9° | 1 5/16" | 5/8" | 2 7/16" | 1 7/16" | 19,500 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 5/8"-18 | 5/8" | 12° | 1 1/2" | 3/4" | 2 5/8" | 1 9/16" | 21,900 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 3/4"-16 | 3/4" | 13° | 1 3/4" | 7/8" | 2 7/8" | 1 11/16" | 29,300 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 7/8"-14 | 7/8" | 6° | 2" | 7/8" | 3 3/8" | 2" | 34,500 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
Ball Joints with Oversized Shank | ||||||||||||
| 5/16"-24 | 3/16" | 15° | 13/16" | 7/16" | 1 9/16" | 15/16" | 2,350 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 5/16"-24 | 1/4" | 15° | 13/16" | 7/16" | 1 9/16" | 15/16" | 4,850 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 1 1/4"-12 | 1" | 12° | 2 3/4" | 1 3/8" | 4 1/8" | 2 5/16" | 80,300 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
Internally Threaded Mil. Spec. Ball Joint Rod Ends
Made of cadmium-plated steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They provide moderate corrosion resistance. All have a PTFE liner that allows smooth ball rotation and eliminates the need for lubrication. Liner meets SAE AS81820.
Rod ends with an oversized shank have a shank that is one size larger than the ID to handle greater stress.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Specifications Met | Material | Choose a Shank Thread Direction | Each | |
Ball Joints | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/8"-24 | 3/8" | 8° | 1" | 1/2" | 1 13/16" | 1" | 8,550 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 0000000 | |
| 7/16"-20 | 7/16" | 10° | 1 1/8" | 9/16" | 2" | 1 1/8" | 12,000 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | Right Hand | 00000000 | 000000 |
| 1/2"-20 | 1/2" | 9° | 1 5/16" | 5/8" | 2 1/4" | 1 1/4" | 19,500 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 5/8"-18 | 5/8" | 12° | 1 1/2" | 3/4" | 2 1/2" | 1 3/8" | 21,900 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 3/4"-16 | 3/4" | 13° | 1 3/4" | 7/8" | 2 7/8" | 1 5/8" | 29,300 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 7/8"-14 | 7/8" | 6° | 2" | 7/8" | 3 3/8" | 1 7/8" | 34,500 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
Ball Joints with Oversized Shank | ||||||||||||
| 5/16"-24 | 3/16" | 15° | 13/16" | 7/16" | 1 3/8" | 3/4" | 2,350 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 5/16"-24 | 1/4" | 15° | 13/16" | 7/16" | 1 7/16" | 3/4" | 4,850 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
| 1 1/4"-12 | 1" | 12° | 2 3/4" | 1 3/8" | 4 1/8" | 2 1/8" | 80,300 | MIL-B-81935 SAE AS81820 SAE AS81935 | Cadmium-Plated Alloy Steel | 0000000 | 000000 | |
High-Speed Ball Bearing Rod Ends
A double row of precision ball bearings allows high speeds and smooth operation. Rod ends are made of cadmium- or zinc-plated steel, which both offer moderate corrosion resistance. Seals keep lubricant in and dirt out.
Cadmium-plated steel rod ends have lubricant that meets MIL-PRF-81322. Those with an oversized shank have a shank that is one size larger than the ID to handle greater stress.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Specifications Met | Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Cadmium-Plated Alloy Steel | |||||||||||
| 10-32 | 3/16" | 20° | 25/32" | 7/16" | 1 3/8" | 3/4" | 1,000 | MIL-PRF-81322, MS21151 | Right Hand | 0000000 | 0000000 |
Ball Joints with Oversized Shank | |||||||||||
Cadmium-Plated Alloy Steel | |||||||||||
| 1/4"-28 | 3/16" | 20° | 3/4" | 7/16" | 1 9/16" | 1" | 1,000 | MIL-PRF-81322, MS21151 | Right Hand | 0000000 | 000000 |
| 3/8"-24 | 1/4" | 20° | 15/16" | 9/16" | 1 7/8" | 1 1/8" | 1,700 | MIL-PRF-81322, MS21151 | Right Hand | 0000000 | 000000 |
| 3/8"-24 | 5/16" | 20° | 1 1/4" | 7/8" | 2 7/16" | 1 9/16" | 2,900 | MIL-PRF-81322, MS21151 | Right Hand | 0000000 | 000000 |
| 7/16"-20 | 5/16" | 20° | 1 1/4" | 7/8" | 2 7/16" | 1 9/16" | 2,900 | MIL-PRF-81322, MS21151 | Right Hand | 0000000 | 000000 |
Internally Threaded High-Speed Ball Bearing Rod Ends
A double row of precision ball bearings allows high speeds and smooth operation. Seals keep lubricant in and dirt out.
Cadmium-plated alloy steel rod ends offer moderate corrosion resistance. They have an oversized shank, which is one size larger than the ID, to handle greater stress. Their lubricant meets MIL-PRF-81322.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Specifications Met | Shank Thread Direction | Each | |
Ball Joints with Oversized Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Cadmium-Plated Alloy Steel | |||||||||||
| 1/4"-28 | 3/16" | 20° | 3/4" | 1/2" | 1 3/8" | 3/4" | 1,000 | MIL-PRF-81322, MS21153 | Right Hand | 0000000 | 0000000 |
| 5/16"-24 | 1/4" | 20° | 15/16" | 9/16" | 1 7/16" | 3/4" | 1,700 | MIL-PRF-81322, MS21153 | Right Hand | 0000000 | 000000 |
Easy-to-Weld 4130 Alloy Steel Round Tubes
- Yield Strength: See table
- Hardness: See table
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: See table
- Specifications Met: See table
4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications. These tubes meet military specifications and SAE dimensional standards.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| OD | OD Tolerance | ID | Yield Strength | Hardness | Maximum Hardness After Heat Treatment | Specifications Met | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.028" Wall Thick. (-0.004" to 0.004" Tolerance) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4" | -0.005" to 0.005" | 0.194" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/8" | -0.005" to 0.005" | 0.319" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1/2" | -0.005" to 0.005" | 0.444" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 5/8" | -0.005" to 0.005" | 0.569" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/4" | -0.005" to 0.005" | 0.694" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1" | -0.010" to 0.010" | 0.944" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
0.035" Wall Thick. (-0.005" to 0.005" Tolerance) | |||||||||||
| 3/16" | -0.005" to 0.005" | 0.118" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1/4" | -0.005" to 0.005" | 0.18" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 5/16" | -0.005" to 0.005" | 0.243" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/8" | -0.005" to 0.005" | 0.305" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1/2" | -0.005" to 0.005" | 0.43" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 5/8" | -0.005" to 0.005" | 0.555" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/4" | -0.005" to 0.005" | 0.68" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/8" | -0.005" to 0.005" | 0.805" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1" | -0.005" to 0.005" | 0.93" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/8" | -0.005" to 0.005" | 1.055" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/4" | -0.005" to 0.005" | 1.18" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/8" | -0.005" to 0.005" | 1.305" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/2" | -0.013" to 0.013" | 1.43" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
0.049" Wall Thick. (-0.007" to 0.007" Tolerance) | |||||||||||
| 1/4" | -0.005" to 0.005" | 0.152" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 5/16" | -0.005" to 0.005" | 0.215" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/8" | -0.005" to 0.005" | 0.277" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/16" | -0.005" to 0.005" | 0.34" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1/2" | -0.005" to 0.005" | 0.402" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 5/8" | -0.005" to 0.005" | 0.527" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/4" | -0.005" to 0.005" | 0.652" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/8" | -0.005" to 0.005" | 0.777" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1" | -0.005" to 0.005" | 0.902" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/8" | -0.005" to 0.005" | 1.027" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/4" | -0.005" to 0.005" | 1.152" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/8" | -0.005" to 0.005" | 1.277" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/2" | -0.005" to 0.005" | 1.402" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/4" | -0.019" to 0.019" | 1.652" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 2" | -0.020" to 0.020" | 1.902" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
0.058" Wall Thick. (-0.009" to 0.009" Tolerance) | |||||||||||
| 3/8" | -0.005" to 0.005" | 0.259" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/16" | -0.005" to 0.005" | 0.322" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1/2" | -0.005" to 0.005" | 0.384" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 5/8" | -0.005" to 0.005" | 0.509" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/4" | -0.005" to 0.005" | 0.634" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/8" | -0.005" to 0.005" | 0.759" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1" | -0.005" to 0.005" | 0.884" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/8" | -0.005" to 0.005" | 1.009" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/4" | -0.005" to 0.005" | 1.134" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/8" | -0.005" to 0.005" | 1.259" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/2" | -0.005" to 0.005" | 1.384" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/4" | -0.010" to 0.010" | 1.634" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
0.065" Wall Thick. (-0.01" to 0.01" Tolerance) | |||||||||||
| 1/4" | -0.005" to 0.005" | 0.12" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 5/16" | -0.005" to 0.005" | 0.183" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/8" | -0.005" to 0.005" | 0.245" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/16" | -0.005" to 0.005" | 0.308" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1/2" | -0.005" to 0.005" | 0.37" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 9/16" | -0.005" to 0.005" | 0.433" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 5/8" | -0.005" to 0.005" | 0.495" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/4" | -0.005" to 0.005" | 0.62" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/8" | -0.005" to 0.005" | 0.745" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1" | -0.005" to 0.005" | 0.87" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/8" | -0.005" to 0.005" | 0.995" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/4" | -0.005" to 0.005" | 1.12" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/8" | -0.005" to 0.005" | 1.245" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/2" | -0.005" to 0.005" | 1.37" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 5/8" | -0.010" to 0.010" | 1.495" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/4" | -0.010" to 0.010" | 1.62" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 2" | -0.010" to 0.010" | 1.87" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
0.083" Wall Thick. (-0.012" to 0.012" Tolerance) | |||||||||||
| 3/8" | -0.005" to 0.005" | 0.209" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/16" | -0.005" to 0.005" | 0.272" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1/2" | -0.005" to 0.005" | 0.334" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 9/16" | -0.005" to 0.005" | 0.397" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 5/8" | -0.005" to 0.005" | 0.459" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/4" | -0.005" to 0.005" | 0.584" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/8" | -0.005" to 0.005" | 0.709" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1" | -0.005" to 0.005" | 0.834" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/8" | -0.005" to 0.005" | 0.959" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/4" | -0.005" to 0.005" | 1.084" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/8" | -0.005" to 0.005" | 1.209" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/2" | -0.005" to 0.005" | 1.334" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 5/8" | -0.010" to 0.010" | 1.459" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/4" | -0.010" to 0.010" | 1.584" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 2" | -0.010" to 0.010" | 1.834" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
0.095" Wall Thick. (-0.014" to 0.014" Tolerance) | |||||||||||
| 5/16" | -0.005" to 0.005" | 0.123" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/16" | -0.005" to 0.005" | 0.248" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1/2" | -0.005" to 0.005" | 0.31" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/4" | -0.005" to 0.005" | 0.56" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1" | -0.005" to 0.005" | 0.81" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/8" | -0.005" to 0.005" | 0.935" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/4" | -0.005" to 0.005" | 1.06" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/8" | -0.005" to 0.005" | 1.185" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/2" | -0.010" to 0.010" | 1.31" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 5/8" | -0.010" to 0.010" | 1.435" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/4" | -0.010" to 0.010" | 1.56" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 2" | -0.010" to 0.010" | 1.81" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 2 1/2" | -0.010" to 0.010" | 2.31" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
0.12" Wall Thick. (-0.018" to 0.018" Tolerance) | |||||||||||
| 3/8" | -0.005" to 0.005" | 0.135" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/16" | -0.005" to 0.005" | 0.198" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1/2" | -0.005" to 0.005" | 0.26" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 9/16" | -0.005" to 0.005" | 0.323" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 5/8" | -0.005" to 0.005" | 0.385" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/4" | -0.005" to 0.005" | 0.51" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 7/8" | -0.005" to 0.005" | 0.635" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1" | -0.005" to 0.005" | 0.76" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/8" | -0.005" to 0.005" | 0.885" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/4" | -0.005" to 0.005" | 1.01" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/8" | -0.005" to 0.005" | 1.135" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/2" | -0.005" to 0.005" | 1.26" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 3/4" | -0.010" to 0.010" | 1.51" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 2" | -0.010" to 0.010" | 1.76" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 2 1/4" | -0.010" to 0.010" | 2.01" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 2 1/2" | -0.010" to 0.010" | 2.26" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3" | -0.010" to 0.010" | 2.76" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
0.156" Wall Thick. (-0.023" to 0.023" Tolerance) | |||||||||||
| 5/8" | -0.005" to 0.005" | 0.313" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
0.188" Wall Thick. (-0.028" to 0.028" Tolerance) | |||||||||||
| 5/8" | -0.005" to 0.005" | 0.249" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3/4" | -0.005" to 0.005" | 0.374" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1" | -0.005" to 0.005" | 0.624" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/8" | -0.005" to 0.005" | 0.749" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/4" | -0.005" to 0.005" | 0.874" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 1 1/2" | -0.005" to 0.005" | 1.124" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 2" | -0.010" to 0.010" | 1.624" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 2 1/2" | -0.010" to 0.010" | 2.124" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
1/4" Wall Thick. (-0.038" to 0.038" Tolerance) | |||||||||||
| 1" | -0.005" to 0.005" | 1/2" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
| 3" | -0.010" to 0.010" | 2 1/2" | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736, SAE AMS6360 | 0.030" per 3 ft. | 000000000 | |||
6" Lg. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | OD Tolerance | ID | ID Tolerance | Yield Strength | Hardness | Maximum Hardness After Heat Treatment | Specifications Met | Each | |
1/4" Wall Thick. (-0.038" to 0.038" Tolerance) | |||||||||
| 1" | -0.005" to 0.005" | 1/2" | Not Rated | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736 | 0000000 | 000000 |
| 1 1/2" | -0.005" to 0.005" | 1" | Not Rated | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736 | 0000000 | 00000 |
| 2" | -0.005" to 0.005" | 1 1/2" | Not Rated | 70,000 psi | Rockwell C20 | Rockwell C49 | MIL-T-6736, SAE AMS-T-6736 | 0000000 | 00000 |
Peel-Away Layered Ring Shims
These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need. To make the layers easier to pull apart, gently heat the shim to soften the adhesive. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.
Aluminum and brass are softer than stainless steel, so they can be used as wear plates between components that rub together, preventing damage to equipment. Brass is more corrosion resistant than aluminum.
For technical drawings and 3-D models, click on a part number.
260 Brass
| ID | ID Tolerance | OD | OD Tolerance | No. of Layers | Layer Thick. | Layer Thick. Tolerance | Min. Hardness | Specifications Met | Magnetic Properties | Each | |
0.032" Thick (-0.005" to 0.005" Tolerance) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/8" | -0.01" to 0.01" | 5/8" | -0.01" to 0.01" | 16 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 1/2" | -0.01" to 0.01" | 3/4" | -0.01" to 0.01" | 16 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 0000 |
| 5/8" | -0.01" to 0.01" | 1" | -0.01" to 0.01" | 16 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 3/4" | -0.01" to 0.01" | 1 1/8" | -0.01" to 0.01" | 16 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 7/8" | -0.01" to 0.01" | 1 3/8" | -0.01" to 0.01" | 16 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 1" | -0.01" to 0.01" | 1 1/2" | -0.01" to 0.01" | 16 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 1 1/4" | -0.01" to 0.01" | 1 3/4" | -0.01" to 0.01" | 16 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 1 1/2" | -0.01" to 0.01" | 2 1/8" | -0.01" to 0.01" | 16 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
0.062" Thick (-0.002" to 0.006" Tolerance) | |||||||||||
| 3/8" | -0.01" to 0.01" | 5/8" | -0.01" to 0.01" | 31 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 1/2" | -0.01" to 0.01" | 3/4" | -0.01" to 0.01" | 31 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 5/8" | -0.01" to 0.01" | 1" | -0.01" to 0.01" | 31 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 3/4" | -0.01" to 0.01" | 1 1/8" | -0.01" to 0.01" | 31 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 7/8" | -0.01" to 0.01" | 1 3/8" | -0.01" to 0.01" | 31 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 1" | -0.01" to 0.01" | 1 1/2" | -0.01" to 0.01" | 31 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 1 1/4" | -0.01" to 0.01" | 1 3/4" | -0.01" to 0.01" | 31 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 1 1/2" | -0.01" to 0.01" | 2 1/8" | -0.01" to 0.01" | 31 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
1/8" Thick (-0.003" to 0.012" Tolerance) | |||||||||||
| 5/8" | -0.01" to 0.01" | 1" | -0.01" to 0.01" | 62 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 3/4" | -0.01" to 0.01" | 1 1/8" | -0.01" to 0.01" | 62 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 7/8" | -0.01" to 0.01" | 1 3/8" | -0.01" to 0.01" | 62 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 1" | -0.01" to 0.01" | 1 1/2" | -0.01" to 0.01" | 62 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 1 1/4" | -0.01" to 0.01" | 1 3/4" | -0.01" to 0.01" | 62 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |
| 1 1/2" | -0.01" to 0.01" | 2 1/8" | -0.01" to 0.01" | 62 | 0.002" | -0.0003" to 0.0003" | Not Rated | ASTM B36, MIL-S-5697, SAE AMS-DTL-22499 | Nonmagnetic | 000000000 | 00000 |