Specifications Met Specifications Met | Show |
|---|
Specifications Met Specifications Met | Hide |
|---|
|
Container Type Container Type |
|---|
|
Trade Name Trade Name |
|---|
For Use On For Use On |
|---|
Maximum Temperature Maximum Temperature |
|---|
|
Lubricant Type Lubricant Type |
|---|
|
Container Size Container Size |
|---|
|
|
|
Compatible With Compatible With |
|---|
|
|
Minimum Temperature Minimum Temperature |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Base Oil Base Oil |
|---|
|
Melting Temperature Melting Temperature |
|---|
|
Synthetic Oil Composition Synthetic Oil Composition |
|---|
|
Electrical Properties Electrical Properties |
|---|
|
Maximum Vacuum @ Temperature Maximum Vacuum@ Temperature |
|---|
|
Dielectric Strength Dielectric Strength |
|---|
|
Electrical Resistivity Electrical Resistivity |
|---|
|
Material Material |
|---|
|
About Lubricants
More
About Grease
More
High-Speed Bearing Grease
Also known as spindle grease, use this in machine tools and other high-speed applications.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter. Grease with clay thickener has excellent heat resistance and good oxidation resistance.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Mobil Mobilgrease 28 handles shock loads and offers good wear and corrosion resistance.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
Mobil Mobilgrease 28—Clay Thickener | |||||||||
| 1.5 | Synthetic | 13.4 | Grease Gun Cartridge | -65° to 350° | 580° | Red | MIL-PRF-81322 | 000000 | 000000 |
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Pkg. Qty. | Pkg. | |
Mobil Mobilgrease 28—Clay Thickener | ||||||||||
| 1.5 | Synthetic | 13.4 | Grease Gun Cartridge | -65° to 350° | 580° | Red | MIL-PRF-81322 | 10 | 00000000 | 0000000 |
Seal and O-Ring Grease
Apply directly to seals and O-rings to extend service life by preventing drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and withstands a wider range of temperatures.
Grease with PTFE thickener has good heat, moisture, and oxidation resistance. Grease lubricates most efficiently within the listed temperature range. Chemours Krytox™ 240AC Type III resists most acids, bases, solvents, and fuels, and is long lasting with an indefinite shelf life.
Vacuum Seal and O-Ring Grease
A firm consistency and resistance to evaporation make this grease ideal for vacuum applications, such as flow meters, vacuum and pressure systems, and laboratory equipment. Apply directly to seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter.
Grease with PTFE thickener resists aggressive acids, bases, and solvents. Chemours Krytox™ 240 grease is long lasting with an indefinite shelf life.
Grease lubricates most efficiently below the maximum temperature. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Maximum Vacuum @ Temperature | Color | Specifications Met | Each | |
Chemours Krytox™ 240AB Type II—PTFE Thickener | ||||||||||
| 2 | Synthetic | 0.5 oz. | Tube | -40° to 450° | Not Rated | 5×10^-6 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 000000 |
| 2 | Synthetic | 2 oz. | Tube | -40° to 450° | Not Rated | 5×10^-6 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 000000 |
Chemours Krytox™ 240AZ Type I—PTFE Thickener | ||||||||||
| 1 | Synthetic | 0.5 oz. | Tube | -70° to 300° | Nonmelting | 4×10^-4 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 00000 |
| 1 | Synthetic | 2 oz. | Tube | -70° to 300° | Nonmelting | 4×10^-4 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 000000 |
Penetrating Lubricants
Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.
Spray bottles and some lubricants cannot be sold to the listed regions due to regulatory limits on VOCs (volatile organic compounds).
LPS No. 1 Greaseless dries to form a lubricating film that resists dust, dirt, and oil. LPS No. 2 Industrial Strength leaves an oily film for long-lasting lubrication with up to a year of corrosion resistance.
Container | Each | Package | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Each | Pkg. Qty. | Pkg. | ||
LPS No. 1 Greaseless | |||||||||
| 11 oz. | Aerosol Can | -50° to 300° | MIL-C-23411 | Canada | 0000000 | 000000 | 12 | 00000000 | 0000000 |
| 20 oz. | Spray Bottle | -50° to 300° | MIL-C-23411 | Canada | 0000000 | 00000 | 12 | 00000000 | 000000 |
| 1 gal. | Can | -50° to 300° | MIL-C-23411 | Canada | 0000000 | 00000 | 4 | 00000000 | 000000 |
| 5 gal. | Drum | -50° to 300° | MIL-C-23411 | Canada | 0000000 | 000000 | __ | 000000 | 00 |
LPS No. 2 Industrial Strength | |||||||||
| 11 oz. | Aerosol Can | -50° to 300° | MIL-C-16173 Grade 3 Class I | Canada | 0000000 | 00000 | 12 | 00000000 | 000000 |
| 20 oz. | Spray Bottle | -50° to 300° | MIL-C-16173 Grade 3 Class I | Canada | 0000000 | 00000 | 12 | 00000000 | 000000 |
| 1 gal. | Can | -50° to 300° | MIL-C-16173 Grade 3 Class I | Canada | 0000000 | 00000 | 4 | 00000000 | 000000 |
| 5 gal. | Drum | -50° to 300° | MIL-C-16173 Grade 3 Class I | Canada | 0000000 | 000000 | __ | 000000 | 00 |
Boeshield T-9 dries to form a waxy film that resists corrosion from salt water.
Antiseize Lubricants
Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Lubricants with copper have good corrosion and heat resistance. Lubricants with graphite have good chemical and corrosion resistance, along with excellent temperature resistance. Lubricants with lead are nonabrasive for use with soft metal and have good heat resistance.
Bostik Never-Seez Regular Grade prevents galling on fasteners made of steel, titanium, and other hard metal.
Lubricants that meet MIL-A-907 and MIL-PRF-907 have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Compatible With | Each | |
Bostik Never-Seez Regular Grade | ||||||||
| 8 oz. | Brush-Top Can | Copper, Graphite | -295° to 1800° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
Lubricants | ||||||||
| 1 lbs. | Brush-Top Can | Lead | -350° to 1050° | Gray | MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 5 lbs. | Can | Lead | -350° to 1050° | Gray | MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Compatible With | Pkg. Qty. | Pkg. | |
Bostik Never-Seez Regular Grade | |||||||||
| 8 oz. | Brush-Top Can | Copper, Graphite | -295° to 1800° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 12 | 00000000 | 0000000 |
Metal-Free Antiseize Lubricants
Free of metal particles, these lubricants won’t react with stainless steel. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Lubricants with graphite have good chemical and corrosion resistance, along with excellent temperature resistance. Lubricants with moly (molybdenum disulfide) withstand high-pressure applications and have excellent wear resistance. Lubricants that meet MIL-PRF-907 have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs. Lubricants that meet MIL-T-5544 are half graphite and half petroleum jelly. Lubricants that meet MIL-PRF-83483 are half moly and half petroleum jelly.
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Compatible With | Each | |
Lubricants | ||||||||
| 8 oz. | Brush-Top Can | Graphite | -295° to 2400° | Black | MIL-PRF-907 | Stainless Steel | 0000000 | 000000 |
| 1 lbs. | Can | Graphite | -65° to 840° | Black | MIL-T-5544 | Stainless Steel | 00000000 | 00000 |
| 1 lbs. | Can | Moly | -20° to 745° | Gray | MIL-PRF-83483 | Stainless Steel | 00000000 | 00000 |
| 1 lbs. | Brush-Top Can | Graphite | -295° to 2400° | Black | MIL-PRF-907 | Stainless Steel | 0000000 | 00000 |
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Compatible With | Pkg. Qty. | Pkg. | |
Lubricants | |||||||||
| 8 oz. | Brush-Top Can | Graphite | -295° to 2400° | Black | MIL-PRF-907 | Stainless Steel | 12 | 00000000 | 0000000 |
| 1 lbs. | Can | Graphite | -65° to 840° | Black | MIL-T-5544 | Stainless Steel | 12 | 000000000 | 000000 |
| 1 lbs. | Can | Moly | -20° to 745° | Gray | MIL-PRF-83483 | Stainless Steel | 12 | 000000000 | 000000 |
| 1 lbs. | Brush-Top Can | Graphite | -295° to 2400° | Black | MIL-PRF-907 | Stainless Steel | 12 | 00000000 | 000000 |
Copper-Free Antiseize Lubricants
Made with graphite and nickel, these lubricants can be used in environments with extreme heat and harsh chemicals, such as acetylene and ammonia, where antiseize lubricants with copper can't. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Lubricants with aluminum resist galvanic corrosion between dissimilar metal.
Lubricants that meet MIL-A-907 have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Compatible With | Each | |
Bostik Never-Seez Pure Nickel Special | ||||||||
| 8 oz. | Brush-Top Can | Aluminum, Graphite, Nickel | -295° to 2400° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
| 1 lbs. | Brush-Top Can | Aluminum, Graphite, Nickel | -295° to 2400° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
Lubricants | ||||||||
| 0.3 oz. | Tube | Aluminum, Graphite, Nickel | -65° to 2600° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 00000000 | 0000 |
| 8 oz. | Brush-Top Can | Aluminum, Graphite, Nickel | -65° to 2600° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 00000000 | 00000 |
| 16 oz. | Grease Gun Cartridge | Aluminum, Graphite, Nickel | -65° to 2600° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 00000000 | 00000 |
| 1 lbs. | Brush-Top Can | Aluminum, Graphite, Nickel | -65° to 2600° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 00000000 | 00000 |
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Compatible With | Pkg. Qty. | Pkg. | |
Bostik Never-Seez Pure Nickel Special | |||||||||
| 8 oz. | Brush-Top Can | Aluminum, Graphite, Nickel | -295° to 2400° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 12 | 00000000 | 0000000 |
| 1 lbs. | Brush-Top Can | Aluminum, Graphite, Nickel | -295° to 2400° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
Lubricants | |||||||||
| 0.3 oz. | Tube | Aluminum, Graphite, Nickel | -65° to 2600° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 50 | 000000000 | 000000 |
| 8 oz. | Brush-Top Can | Aluminum, Graphite, Nickel | -65° to 2600° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 12 | 000000000 | 000000 |
| 16 oz. | Grease Gun Cartridge | Aluminum, Graphite, Nickel | -65° to 2600° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 12 | 000000000 | 000000 |
| 1 lbs. | Brush-Top Can | Aluminum, Graphite, Nickel | -65° to 2600° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 12 | 000000000 | 000000 |
Corrosion-Resistant Antiseize Lubricants
Corrosion-resistant additives allow these lubricants to withstand caustic environments, such as steel mills and power plants. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Lubricants with aluminum and with copper have good heat resistance. Lubricants with graphite have good chemical and corrosion resistance, along with excellent heat resistance. Lubricants with stainless steel resist alkaline solutions, as well as chemical and acid vapors. Bostik Never-Seez High Temperature Stainless can handle heavy loads. Bostik Never-Seez Nuclear Grade Stainless is made with highly pure ingredients for chemical and corrosion resistance in extreme environments.
Loctite® Silver Grade Anti-Seize can be used with fine threads. Lubricants that meet MIL-A-907 and MIL-PRF-907 have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.
Lubricants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Compatible With | Cannot Be Sold To | Each | |
Bostik Never-Seez High Temperature Stainless | |||||||||
| 8 oz. | Brush-Top Can | Aluminum, Graphite, Stainless Steel | -295° to 2200° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | __ | 000000 | 000000 |
| 1 lbs. | Brush-Top Can | Aluminum, Graphite, Stainless Steel | -295° to 2200° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | __ | 000000 | 00000 |
Bostik Never-Seez Nuclear Grade Stainless | |||||||||
| 1 lbs. | Can | Graphite, Stainless Steel | -295° to 2200° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | __ | 0000000 | 000000 |
Loctite® LB 8150 Silver Grade Anti-Seize | |||||||||
| 8 oz. | Brush-Top Can | Aluminum, Graphite | -65° to 1600° | Silver | MIL-PRF-907 | Aluminum, Brass, Copper, Steel | __ | 0000000 | 00000 |
Loctite® LB 8151 AE Silver Grade Anti-Seize | |||||||||
| 12 oz. | Aerosol Can | Aluminum, Graphite | -65° to 1600° | Silver | MIL-PRF-907 | Aluminum, Brass, Copper, Steel | CA | 0000000 | 00000 |
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Compatible With | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
Bostik Never-Seez High Temperature Stainless | ||||||||||
| 8 oz. | Brush-Top Can | Aluminum, Graphite, Stainless Steel | -295° to 2200° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | __ | 12 | 00000000 | 0000000 |
| 1 lbs. | Brush-Top Can | Aluminum, Graphite, Stainless Steel | -295° to 2200° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | __ | 12 | 00000000 | 000000 |
Bostik Never-Seez Nuclear Grade Stainless | ||||||||||
| 1 lbs. | Can | Graphite, Stainless Steel | -295° to 2200° | Silver | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | __ | 12 | 00000000 | 00000000 |
Loctite® LB 8150 Silver Grade Anti-Seize | ||||||||||
| 8 oz. | Brush-Top Can | Aluminum, Graphite | -65° to 1600° | Silver | MIL-PRF-907 | Aluminum, Brass, Copper, Steel | __ | 12 | 00000000 | 000000 |
Loctite® LB 8151 AE Silver Grade Anti-Seize | ||||||||||
| 12 oz. | Aerosol Can | Aluminum, Graphite | -65° to 1600° | Silver | MIL-PRF-907 | Aluminum, Brass, Copper, Steel | CA | 12 | 00000000 | 000000 |
Corrosion-Resistant Antiseize Lubricants with Material Certification
These lubricants come with a traceable lot number and material test report. They’re made with highly pure ingredients and corrosion-resistant additives for chemical and corrosion resistance in extreme environments. The addition of nickel makes them excellent for applications where dissimilar metal, such as brass and steel, are used together. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Lubricants that meet MIL-A-907 have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Certificate | Compatible With | Each | |
Bostik Never-Seez Nuclear Grade Nickel | |||||||||
| 8 oz. | Brush-Top Can | Aluminum, Graphite, Nickel | -295° to 2400° | Silver | MIL-A-907 | Paper Material Certificate with Traceable Lot Number, Test Report, and Product Shelf Life | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
| 1 lbs. | Can | Aluminum, Graphite, Nickel | -295° to 2400° | Silver | MIL-A-907 | Paper Material Certificate with Traceable Lot Number, Test Report, and Product Shelf Life | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Specifications Met | Certificate | Compatible With | Pkg. Qty. | Pkg. | |
Bostik Never-Seez Nuclear Grade Nickel | ||||||||||
| 8 oz. | Brush-Top Can | Aluminum, Graphite, Nickel | -295° to 2400° | Silver | MIL-A-907 | Paper Material Certificate with Traceable Lot Number, Test Report, and Product Shelf Life | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 12 | 00000000 | 0000000 |
| 1 lbs. | Can | Aluminum, Graphite, Nickel | -295° to 2400° | Silver | MIL-A-907 | Paper Material Certificate with Traceable Lot Number, Test Report, and Product Shelf Life | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 12 | 00000000 | 00000000 |
Electrically Conductive Antiseize Lubricants
Copper allows these lubricants to conduct electricity, while graphite gives them good chemical and corrosion resistance. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Lubricants that meet MIL-A-907 and MIL-PRF-907 have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.
Dielectric strength measures the maximum voltage a lubricant can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.
Electrical resistivity is a measure of how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Electrical Resistivity | Dielectric Strength, V/mil | Temp. Range, °F | Color | Specifications Met | Compatible With | Each | |
Lubricants | ||||||||||
| 4 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 00000000 | 00000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 12 oz. | Aerosol Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 16 oz. | Grease Gun Cartridge | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 00000000 | 00000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 2 lbs. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 1 gal. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Electrical Resistivity | Dielectric Strength, V/mil | Temp. Range, °F | Color | Specifications Met | Compatible With | Pkg. Qty. | Pkg. | |
Lubricants | |||||||||||
| 4 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 24 | 00000000 | 0000000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 000000000 | 000000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 12 oz. | Aerosol Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 16 oz. | Grease Gun Cartridge | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 000000000 | 000000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 2 lbs. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 6 | 00000000 | 000000 |
| 1 gal. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 4 | 00000000 | 000000 |
Heat Sink Compounds
Bond heat sinks to surfaces, eliminating air gaps for maximum heat transfer. These compounds are commonly used with transistors, diodes, rectifiers, and transformers.
Zinc-oxide compounds create a more secure bond than silicone compounds.