Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants with copper have good corrosion and heat resistance. Lubricants with graphite have good chemical and corrosion resistance, along with excellent temperature resistance. Lubricants with lead are nonabrasive for use with soft metal and have good heat resistance.

Bostik Never-Seez Regular Grade prevents galling on fasteners made of steel, titanium, and other hard metal.

Lubricants that meet MIL-A-907F and MIL-PRF-907F have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.

Made with graphite and nickel, these lubricants can be used in environments with extreme heat and harsh chemicals, such as acetylene and ammonia, where antiseize lubricants with copper can't. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants with aluminum resist galvanic corrosion between dissimilar metal.

Lubricants that meet MIL-A-907F have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.

Free of metal particles, these lubricants won’t react with stainless steel. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants with graphite have good chemical and corrosion resistance, along with excellent temperature resistance. Lubricants with moly (molybdenum disulfide) withstand high-pressure applications and have excellent wear resistance. Lubricants that meet MIL-PRF-907F have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs. Lubricants that meet MIL-T-5544 are half graphite and half petroleum jelly. Lubricants that meet MIL-PRF-83483 are half moly and half petroleum jelly.

Corrosion-resistant additives allow these lubricants to withstand caustic environments, such as steel mills and power plants. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants with aluminum and with copper have good heat resistance. Lubricants with graphite have good chemical and corrosion resistance, along with excellent heat resistance. Lubricants with stainless steel resist alkaline solutions, as well as chemical and acid vapors. Bostik Never-Seez High Temperature Stainless can handle heavy loads. Bostik Never-Seez Nuclear Grade Stainless is made with highly pure ingredients for chemical and corrosion resistance in extreme environments.

Loctite® Silver Grade Anti-Seize can be used with fine threads. Lubricants that meet MIL-A-907F and MIL-PRF-907F have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.

These lubricants come with a traceable lot number and material test report. They’re made with highly pure ingredients and corrosion-resistant additives for chemical and corrosion resistance in extreme environments. The addition of nickel makes them excellent for applications where dissimilar metal, such as brass and steel, are used together. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants that meet MIL-A-907F have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.

Copper allows these lubricants to conduct electricity, while graphite gives them good chemical and corrosion resistance. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants that meet MIL-A-907F and MIL-PRF-907F have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.

Dielectric strength measures the maximum voltage a lubricant can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.

Electrical resistivity is a measure of how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.

Made of 98% moly, this lubricant withstands pressure up to 500,000 psi and has excellent wear resistance. Apply it to metal surfaces to prevent parts from corroding or sticking.

Nano-sized additives penetrate small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. It's formulated to adhere to metal parts and to stay in place in wet environments.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

A firm consistency and resistance to evaporation make this grease ideal for vacuum applications, such as flow meters, vacuum and pressure systems, and laboratory equipment. Apply directly to seals and O-rings to prevent drying and cracking.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter.

Grease with PTFE thickener resists aggressive acids, bases, and solvents. Chemours Krytoxâ„¢ 240 grease is long lasting with an indefinite shelf life.

Grease lubricates most efficiently below the maximum temperature. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.

Apply directly to seals and O-rings to extend service life by preventing drying and cracking.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and withstands a wider range of temperatures.

Grease with PTFE thickener has good heat, moisture, and oxidation resistance. Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

Chemours Krytoxâ„¢ 240AC Type III resists most acids, bases, solvents, and fuels, and is long lasting with an indefinite shelf life.

Fluorocarbon and fluorinated polymer thickeners add chemical resistance to this grease. It remains intact when exposed to water and most solvents and chemicals. Apply directly to plastic and rubber seals and O-rings to prevent drying and cracking.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 3 is about the consistency of vegetable shortening.

Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity. It’s not for use with ketones, such as acetone and MEK.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.