Eliminating the need for step blocks or other rear support, the pivoting rocker clamps workpieces of various thicknesses.

Instead of a step block, support these clamps using a screw, leveling mount, or any other threaded object.

Good for occasional machining, economy kits contain lower-strength components than standard kits.

Designed to provide more clearance above the nut than standard clamps, these have an offset shape. Also known as gooseneck clamps.

Position these clamps between two workpieces, vises, or fixtures and secure both to your machine table using T-slot nuts or bolts.

A plastic pad on the gripping surface of these clamps prevents workpiece marring, making them useful for holding polished surfaces and reducing the need for secondary finishing steps.

Making minimal contact with the workpiece while holding securely, these clamps are good for small parts and can clamp into holes and notches.

The built-in T-slot nut on these side clamps lets you clamp a part to a machine table quickly. Their small footprint leaves more free space on your table than standard side clamps.

Use these clamps to hold large round parts for machining. Each clamp comes with five lengths of chain that combine to accommodate different size workpieces.

Machine these clamps to match the contours of your workpiece and turn the screw to grip.

Machine these fixture clamps to match the contours of your workpiece for a stronger grip.

Machine these fixture clamps to match the contours of your workpieces for a stronger grip. Place the clamp between the two workpieces in a fixture and tighten the screw to extend the sides of the clamp, creating a secure hold against both workpieces.

Secure a workpiece from the inside, leaving the outside clear for machining.

Screw these clamps directly into a tapped hole in a fixture.

Tighten the spring-loaded socket head cap screw on these clamps to hold your workpiece from above.

Build these components into fixture plates, machine subplates, and tombstones for quick changes. The system clamps and locates at the same time for accurate positioning with repeatability of ±0.0005".