Just twist the collar ring and these tools will change from a standard cordless drill to a hammer drill.

The rotary-only mode is for general purpose drilling and driving fasteners. Use this mode with standard drill bits for wood and metal as well as masonry drill bits. In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. The hammering action pounds concrete and masonry, which breaks up the material while it drills. Use this mode for drilling masonry materials using carbide-tipped masonry drill bits.

These drills have a keyless chuck for fast bit changes. All have a variable speed—the further you depress the trigger, the faster the drill rotates. They also have an adjustable clutch that lets you adjust the torque.

See Batteries and Chargers for Milwaukee Cordless Tools for replacement batteries and chargers.

A traditional pistol-grip shape makes these drills suitable for a variety of drilling applications. They have a variable speed—the further you depress the trigger, the faster the drill rotates.

Drills with keyed chuck can be tightened with the included key.

Drills with keyless chuck open and close without a key for fast bit changes.

Drills with a trigger lock allow for continuous use without holding down the trigger.

With a powerful motor, these drills have the strength for big drilling and mixing applications. Their top handle provides additional leverage and stability, and a rear D-handle makes them easy to carry. All have a keyed chuck that can be tightened with the included key.

Get a better angle when drilling into hard-to-reach spaces. These drills have a keyed chuck that can be tightened with the included key.

Styles A and B have a variable speed—the further you depress the trigger, the faster the drill rotates.

Just push a switch and this tool will change from a standard electric drill to a hammer drill.

The rotary-only mode is for general purpose drilling and driving fasteners. Use this mode with standard drill bits for wood and metal as well as masonry drill bits. In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. The hammering action pounds concrete and masonry, which breaks up the material while it drills. Use this mode for drilling masonry materials using carbide-tipped masonry drill bits.

Drill has a keyed chuck that can be tightened with the included key. This model has a variable speed—the further you depress the trigger, the faster the drill rotates. It also has a detachable Quik-Lok cord. See Milwaukee Quik-Lok Power Cords for replacement cord.

A powerful and durable hammer mechanism lets you drill deeper, larger holes in masonry and concrete in less time than with hammer drills. Also known as a SDS-Plus rotary hammer, this model is lightweight and ideal for overhead work and drilling smaller holes. Use with SDS-Plus drill bits. Note: SDS-Plus and SDS-Max bits are not interchangeable.

Use the rotary-only mode for general purpose drilling and driving fasteners (requires a chuck adapter or a magnetic bit holder). In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. In the percussion-only mode, the tool provides only the hammering action. Use this mode when working with chisels and other masonry tools (see Chisels for Rotary Hammers).

This model has a variable speed—the further you depress the trigger, the faster the speed. It also has a built-in safety clutch to protect you and the hammer if the bit gets stuck in your material. A chisel lock allows you to choose from 35 chisel positions to match the angle of many surfaces.

Get the tools you need in an easy-to-carry combination kit.

Lock the magnet to secure the base and then move the motor to center the cutter for pinpoint accuracy. You can move the motor 3/4" forward and backward and tilt it 20° left and right. Switch these drills from forward to reverse without stopping—ideal for both drilling and tapping applications (not recommended for use with pipe taps). In addition, a dial lets you adjust the speed to match your application, making these great for drilling hard materials at slow speeds. Base attaches to flat ferrous surfaces (such as steel and cast iron). Holding force (also called drill point breakaway) is calculated against a 1" thick steel plate. Drills include a spoked feed handle that mounts on either side.

Drill presses for 3/4" and 1 1/4" max. drill bit sizes can be used with carbide-tipped hollow-core cutters.

Drill press for 1/2" max. drill bit size cannot be used with hollow-core cutters. It is not for use with 5/8"-11 and 1/2"-13 taps.

Note: To avoid damaging the electromagnet, do not mount press to a base that has a welder already grounded to it.

Switch these drills from forward to reverse without stopping—ideal for both drilling and tapping applications (not recommended for use with pipe taps). In addition, a dial lets you adjust the speed to match your application, making these great for drilling hard materials at slow speeds. Base attaches to flat ferrous surfaces (such as steel and cast iron). Holding force (also called drill point breakaway) is calculated against a 1" thick steel plate. Drills include a spoked feed handle that mounts on either side.

Drill presses for 3/4" and 1 1/4" max. drill bit sizes can be used with carbide-tipped hollow-core cutters.

Drill press for 1/2" max. drill bit size cannot be used with hollow-core cutters. It is not for use with 5/8"-11 and 1/2"-13 taps.

Note: To avoid damaging the electromagnet, do not mount press to a base that has a welder already grounded to it.

Rechargeable batteries keep these tools powered wherever you need them.

Multiposition-grip driver has a handle that pivots for a straight or pistol grip.

These tools deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material. Some drivers include rechargeable batteries that provide power wherever you need it. For other drivers, batteries and chargers are sold separately.

For Style A-C drivers, you can add a right-angle attachment (sold separately) to extend the reach and angle of the drivers to get into hard-to-reach spots. Style C drivers with Bluetooth compatibility connect to a mobile app, so you can track their location, customize their settings, view data usage, and receive alerts before they need repair.

These arbor adapters are required when using Milwaukee annular cutters. They come with a pilot pin, which aligns the cutter and ejects the slug.