Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

These steel ball bearings handle higher loads than stainless steel and plastic bearings.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.

These PEEK bearings operate in temperatures above 300° F, almost twice as high as our other plastic ball bearings.

The flange ensures proper positioning inside a tube or housing.

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.

Unlike other ball bearings, these do not need to be fully inserted into a housing. A spline around the outside of the bearing creates a permanent, secure hold in thin panels.

Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.

The raceways in these bearings are positioned off-center to handle angular (combined radial and thrust) loads.