Minimum Clamp ID Minimum Clamp ID |
|---|
Maximum Clamp ID Maximum Clamp ID |
|---|
Material Material |
|---|
|
Screw Material Screw Material |
|---|
|
Drive Style Drive Style |
|---|
Nut Material Nut Material |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Measuring Hose and Tube Clamps
What's the best way to determine the clamp size you'll need? Simply measure the outside diameter of your hose with the fitting installed. Some clamps accommodate a range of sizes, so be sure the size you need falls in the middle of that range.
More
Tight-Seal Bolt Clamps for Soft Hose and Tube
Galvanized Steel
304 Stainless Steel
The bolt design creates a 360° seal to prevent leaks. Clamps have rolled edges to protect soft hose and tube, such as silicone. Do not exceed the maximum torque or clamps may be damaged.
Galvanized steel and zinc-plated steel have fair corrosion resistance.
304 stainless steel and 300 series stainless steel have very good corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamp ID Range | Band | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Wd. | Thick. | Temperature Range, ° F | Max. Torque, in.-lbs. | Drive Style | Hex Size | Reusable | Bolt Type | Specifications Met | Pkg. Qty. | Pkg. | |
Galvanized Steel with Zinc-Plated Steel Screw | |||||||||||||
| 9/32" to 21/64" | 7 to 8.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Slotted, External Hex | 9/32" | Yes | Straight | SAE J1508 | 10 | 00000000 | 000000 |
| 5/16" to 3/8" | 8 to 9.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Slotted, External Hex | 9/32" | Yes | Straight | SAE J1508 | 10 | 00000000 | 00000 |
| 23/64" to 13/32" | 9 to 10.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Slotted, External Hex | 9/32" | Yes | Straight | SAE J1508 | 10 | 00000000 | 00000 |
| 3/8" to 29/64" | 9.5 to 11.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Slotted, External Hex | 9/32" | Yes | Straight | SAE J1508 | 10 | 00000000 | 00000 |
| 13/32" to 31/64" | 10.5 to 12.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Slotted, External Hex | 9/32" | Yes | Straight | SAE J1508 | 10 | 00000000 | 00000 |
| 29/64" to 17/32" | 11.5 to 13.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Slotted, External Hex | 9/32" | Yes | Straight | SAE J1508 | 10 | 00000000 | 00000 |
| 31/64" to 37/64" | 12.5 to 14.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Slotted, External Hex | 9/32" | Yes | Straight | SAE J1508 | 10 | 00000000 | 00000 |
| 17/32" to 39/64" | 13.5 to 15.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Slotted, External Hex | 9/32" | Yes | Straight | SAE J1508 | 10 | 00000000 | 00000 |
| 35/64" to 21/32" | 14 to 16.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Slotted, External Hex | 9/32" | Yes | Straight | SAE J1508 | 10 | 00000000 | 00000 |
| 19/32" to 11/16" | 15 to 17.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Slotted, External Hex | 9/32" | Yes | Straight | SAE J1508 | 10 | 00000000 | 00000 |
304 Stainless Steel with 304 Stainless Steel Screw | |||||||||||||
| 19/64" to 21/64" | 7.5 to 8.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Phillips, External Hex | 9/32" | Yes | Straight | SAE J1508 | 5 | 00000000 | 00000 |
| 21/64" to 3/8" | 8.5 to 9.5 | 3/8" | 0.02" | -40° to 450° | 17.7 | Phillips, External Hex | 9/32" | Yes | Straight | SAE J1508 | 5 | 00000000 | 00000 |
| 3/8" to 7/16" | 9.5 to 11 | 3/8" | 0.02" | -40° to 450° | 17.7 | Phillips, External Hex | 9/32" | Yes | Straight | SAE J1508 | 5 | 00000000 | 00000 |
| 13/32" to 15/32" | 10.5 to 12 | 3/8" | 0.02" | -40° to 450° | 17.7 | Phillips, External Hex | 9/32" | Yes | Straight | SAE J1508 | 5 | 00000000 | 00000 |
| 29/64" to 33/64" | 11.5 to 13 | 3/8" | 0.02" | -40° to 450° | 17.7 | Phillips, External Hex | 9/32" | Yes | Straight | SAE J1508 | 5 | 00000000 | 00000 |
| 31/64" to 35/64" | 12.5 to 14 | 3/8" | 0.02" | -40° to 450° | 17.7 | Phillips, External Hex | 9/32" | Yes | Straight | SAE J1508 | 5 | 00000000 | 00000 |
| 17/32" to 19/32" | 13.5 to 15 | 3/8" | 0.02" | -40° to 450° | 17.7 | Phillips, External Hex | 9/32" | Yes | Straight | SAE J1508 | 5 | 00000000 | 00000 |
| 37/64" to 5/8" | 14.5 to 16 | 3/8" | 0.02" | -40° to 450° | 17.7 | Phillips, External Hex | 9/32" | Yes | Straight | SAE J1508 | 5 | 00000000 | 00000 |
| 19/32" to 43/64" | 15 to 17 | 3/8" | 0.02" | -40° to 450° | 17.7 | Phillips, External Hex | 9/32" | Yes | Straight | SAE J1508 | 5 | 00000000 | 00000 |
| 5/8" to 45/64" | 16 to 18 | 3/8" | 0.02" | -40° to 450° | 17.7 | Phillips, External Hex | 9/32" | Yes | Straight | SAE J1508 | 5 | 00000000 | 00000 |