McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    115 Products

    Miniature Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Miniature Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Miniature Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Opening. Miniature Open-End Wrench Sets.

    Hex Opening

    Take on precision tasks with assorted sizes of extra slim heads. The wrenches in these sets are just the right size for assembling electronics, building models, and repairing small appliances.
    Hex Opening—Snugly grip the sides rather then the corners of commonly used hex-head fasteners so they won't slip, even when the nuts and bolts are rusted or damaged.
    Black-Oxide Steel—The dark, matte coating protects these wrenches from wear and won't flake off. They offer minimal corrosion resistance, though, so they're best for dry environments.
    No. of
    Pieces
    Sizes Included
    Overall
    Lg.
    Opening
    Angle
    Container
    Type
    Each
    Hex Opening
     
    Black-Oxide Steel
    81/4"
    1/8"
    3/16"
    3/32"
    5/16"
    5/32"
    5/64"
    7/64"
    4 1/8"30°Plastic Pouch8041A19000000
    82.5 mm
    3 mm
    3.2 mm
    4 mm
    5 mm
    5.5 mm
    6 mm
    7 mm
    4 1/8"30°Plastic Pouch7793A4100000
     

    Miniature Open-End Wrenches

    Image of ProductInUse. Front orientation. Open-End Wrenches. Miniature Open-End Wrenches.
    Image of Product. Front orientation. Open-End Wrenches. Miniature Open-End Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Miniature Open-End Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Opening. Miniature Open-End Wrenches.

    Hex Opening

    Take on precision tasks with extra slim heads. These wrenches are just the right size for assembling electronics, building models, and repairing small appliances.
    Hex Opening—Snugly grip the sides rather then the corners of commonly used hex-head fasteners so they won't slip, even when the nuts and bolts are rusted or damaged.
    Black-Oxide Steel—The dark, matte coating protects these wrenches from wear and won't flake off. They offer minimal corrosion resistance, though, so they're best for dry environments.
    Drive
    Size
    Overall
    Lg.
    Opening
    Angle
    Head
    Thk.
    Each
    Hex Opening
     
    Black-Oxide Steel
    5/64"4 1/8"30°1/16"8041A1100000
    3/32"4 1/8"30°1/16"8041A120000
    7/64"4 1/8"30°1/16"8041A130000
    1/8"4 1/8"30°1/16"8041A140000
    5/32"4 1/8"30°1/16"8041A150000
    3/16"4 1/8"30°1/16"8041A160000
    1/4"4 1/8"30°1/16"8041A170000
    5/16"4 1/8"30°1/16"8041A210000
    2.5 mm4 1/8"30°1/16"7793A310000
    3 mm4 1/8"30°1/16"7793A320000
    3.2 mm4 1/8"30°1/16"7793A330000
    4 mm4 1/8"30°1/16"7793A340000
    5 mm4 1/8"30°1/16"7793A350000
    5.5 mm4 1/8"30°1/16"7793A360000
    6 mm4 1/8"30°1/16"7793A370000
    7 mm4 1/8"30°1/16"7793A380000
     

    Stubby Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Stubby Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Stubby Open-End Wrench Sets.

    Round

    Opening

    Assorted sizes of these short open-end wrenches are perfect for spots that don't have enough clearance for full-sized tools. Their compact design lets you make full turns without hitting or disassembling surrounding parts. They are often used to fasten bolts in cramped engine compartments and tight plumbing jobs. For tasks that require more muscle, longer wrenches may be necessary.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Opening
    Angle
    Appearance
    Container Type
    Specs.
    Met
    Each
    Round Opening
     
    Chrome-Plated Steel
    51/2" × 9/16"
    1/4" × 9/32"
    3/16" × 7/32"
    3/8" × 7/16"
    5/16" × 11/32"
    2 7/8" to 4 3/8"15°DullPlastic Roll-Up Pouch55065A71000000
    63.2 mm × 5.5 mm
    4 mm × 5 mm
    6 mm × 7 mm
    8 mm × 9 mm
    10 mm × 11 mm
    12 mm × 13 mm
    2 3/4" to 4 3/8"15°DullPlastic Roll-Up PouchISO 33185739A1100000
     

    Stubby Combination Wrenches

    Image of Product. Front orientation. Combination Wrenches. Stubby Combination Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Combination Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Combination Wrenches.
    Image of Specification. 12-Point Opening. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Stubby Combination Wrenches.
    Image of Specification. 6-Point Opening. Front orientation. ZoomedIn view. Contains Border. 6-Point Opening. Stubby Combination Wrenches.

    12-Point

    Opening

    6-Point

    Opening

    Turn nuts and bolts in tight spaces. These wrenches are up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. However, you may need longer wrenches for higher-leverage jobs.
    6-Point Opening—Avoid rounding off the corners of hex fasteners. These wrenches won't slip, even when nuts and bolts are rusted or damaged, since they grip the sides rather than the corners.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Box End
    Open
    End
    Drive
    Size
    Overall
    Lg.
    Head Offset
    Angle
    Head
    Thick.
    Opening
    Angle
    Head
    Thick.
    Appearance
    Specs. Met
    Each
    6-Point Opening
     
    Chrome-Plated Steel
    1/8"2 11/16"15°1/8"15°1/8"Polished5772A21000000
    5/32"2 13/16"15°1/8"15°5/32"Polished56945A1200000
    5/32"2 7/8"15°5/32"15°1/8"Polished5772A2200000
    3/16"3"15°5/32"15°1/8"Polished5772A2300000
    3.2 mm2 3/4"15°3/32"22.5°3/32"Polished5314A3500000
    3.5 mm2 3/4"15°3/32"22.5°3/32"Polished5314A3600000
    4 mm2 3/4"15°3/32"22.5°3/32"Polished5314A8300000
    4.5 mm3 1/8"15°5/32"22.5°3/32"Polished5314A3700000
    5 mm3 1/8"15°5/32"22.5°3/32"Polished5314A8400000
    5.5 mm3 1/8"15°5/32"22.5°3/32"Polished5314A8500000
    5.5 mm3 3/8"15°5/32"15°5/32"Dull55715A2500000
    7 mm4"15°11/64"15°15/64"Polished5314A8700000
    8 mm4 1/2"15°3/16"15°17/64"Polished5314A8800000
     
    12-Point Opening
     
    Chrome-Plated Steel
    13/64"3 1/8"15°1/8"15°1/8"Polished5304A8400000
    15/64"3 1/4"15°3/32"15°1/8"Polished5304A8600000
    1/4"3 1/4"15°3/16"15°11/64"Polished5443A2600000
    9/32"3 3/8"15°7/32"15°3/16"Polished5443A3200000
    5/16"3 1/2"15°15/64"15°1/4"Polished5443A2800000
    11/32"3 5/8"15°1/4"15°13/64"Polished5304A3200000
    3/8"3 3/4"15°9/32"15°7/32"Polished5443A2900000
    7/16"3 15/16"15°19/64"15°5/16"Polished5304A1200000
    1/2"4 5/16"15°23/64"15°3/8"Polished5304A1300000
    9/16"4 1/2"15°3/8"15°19/64"Polished5304A1400000
    5/8"4 7/8"15°27/64"15°7/16"Polished5304A1500000
    11/16"5 1/16"15°29/64"15°15/32"Polished5304A1600000
    3/4"5 7/16"15°31/64"15°1/2"Polished5304A1700000
    6 mm3 1/4"15°3/16"15°11/64"PolishedASME B107.10055715A2600000
    7 mm3 3/8"15°7/32"15°3/16"PolishedASME B107.10055715A2700000
    8 mm3 1/2"15°15/64"15°1/4"PolishedASME B107.10055715A2800000
    9 mm3 5/8"15°1/4"15°13/64"PolishedASME B107.10055715A2900000
    10 mm3 3/4"15°9/32"15°7/32"PolishedASME B107.10055715A300000
    11 mm3 15/16"15°19/64"15°5/16"PolishedASME B107.10055715A3100000
    12 mm4 1/8"15°21/64"15°11/32"PolishedASME B107.10055715A3200000
    13 mm4 5/16"15°23/64"15°3/8"PolishedASME B107.10055715A3300000
    14 mm4 1/2"15°3/8"15°19/64"PolishedASME B107.10055715A3400000
    15 mm4 11/16"15°25/64"15°13/32"PolishedASME B107.10055715A3500000
    16 mm4 7/8"15°27/64"15°7/16"PolishedASME B107.10055715A3600000
    17 mm5 1/16"15°29/64"15°15/32"PolishedASME B107.10055715A3700000
    18 mm5 1/4"15°15/32"15°11/32"PolishedASME B107.10055715A3800000
    19 mm5 7/16"15°31/64"15°1/2"PolishedASME B107.10055715A3900000
     

    Stubby Open-End Wrenches

    Image of Product. Front orientation. Open-End Wrenches. Stubby Open-End Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Open-End Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Stubby Open-End Wrenches.

    Round

    Opening

    These short open-end wrenches are perfect for spots that don't have enough clearance for full-sized tools. Their compact design lets you make full turns without hitting or disassembling surrounding parts. They are often used to fasten bolts in cramped engine compartments and tight plumbing jobs. For tasks that require more muscle, longer wrenches may be necessary.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    Drive Size
    Overall
    Lg.
    Opening
    Angle
    Head
    Thickness
    Appearance
    Each
    Round Opening
     
    Chrome-Plated Steel
    3/16" × 7/32"2 7/8"15°1/8"Dull55065A61000000
    1/4" × 9/32"3 1/8"15°1/8"Dull55065A6200000
    5/16" × 11/32"3 1/2"15°5/32" × 1/8"Dull55065A6300000
    3/8" × 7/16"3 3/4"15°5/32" × 1/8"Dull55065A6400000
    1/2" × 9/16"4 3/8"15°3/16"Dull55065A6500000
    6 mm × 7 mm3 1/8"15°3/32"Dull5739A300000
    10 mm × 11 mm4"15°1/8"Dull5739A500000
    12 mm × 13 mm4 3/8"15°1/8"Dull5739A600000
     

    Stubby Combination Wrench Sets

    Image of Product. Front orientation. Combination Wrenches. Stubby Combination Wrench Sets, Fabric Roll-Up Pouch.
    Image of Product. Front orientation. Combination Wrenches. Stubby Combination Wrench Sets, Plastic Roll-Up Pouch.

    Fabric Roll-Up Pouch

    Plastic Roll-Up Pouch

    Image of Attribute. Front orientation. Contains Annotated. Stubby Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Combination Wrench Sets.
    Image of Specification. 12-Point Opening. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Stubby Combination Wrench Sets.

    12-Point

    Opening

    Turn nuts and bolts in tight spaces with the wrenches in these sets. They are up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. However, you may need longer wrenches for higher-leverage jobs.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    No. of
    Pieces
    Drive Size
    Overall Lg.
    Box-End Head
    Offset Angle
    Open-End Opening
    Angle
    Appearance
    Container Type
    Specs. Met
    Each
    12-Point Opening
     
    Chrome-Plated Steel
    73/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"3 3/4" to 5 7/16"15°15°PolishedFabric Roll-Up Pouch5304A210000000
    77 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm3 3/8" to 4 5/16"15°15°PolishedFabric Roll-Up Pouch5314A24000000
    111/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"3 1/4" to 5 1/2"15°15°PolishedPlastic Roll-Up Pouch5443A44000000
    146 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm3 1/4" to 5 1/2"15°15°PolishedPlastic Roll-Up PouchASME B107.10055715A41000000
     

    Stubby Ratcheting Combination Wrench Sets

    Image of Product. Front orientation. Combination Wrenches. Stubby Ratcheting Combination Wrench Sets.
    Image of Product. Front orientation. Combination Wrenches. Stubby Ratcheting Combination Wrench Sets, Fabric Roll-Up Pouch.

    Fabric Roll-Up Pouch

    Image of Attribute. Front orientation. Contains Annotated. Stubby Ratcheting Combination Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Stubby Ratcheting Combination Wrench Sets.

    12-Point

    Opening

    Turn nuts and bolts in tight spaces without removing and repositioning the wrenches in these sets. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. When you need more leverage, opt for standard-length ratcheting wrenches.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Standard—Made in the U.S. from high-strength steel or stainless steel, these wrenches are built to last. They’re indispensable for daily maintenance and repair.
    Economy—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    No. of
    Pieces
    Drive Size
    Overall Lg.
    No. of
    Teeth
    Open-End Opening
    Angle
    Appearance
    Material
    Container Type
    Specs. Met
    Each
    Standard
     
    12-Point Opening
    73/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"3 7/8" to 5 3/8"7215°PolishedChrome-Plated SteelFabric Roll-Up Pouch5666A650000000
    1010 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm3 1/2" to 5 3/8"7215°PolishedChrome-Plated SteelFabric Roll-Up Pouch5666A67000000
     
    Economy
     
    12-Point Opening
    73/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"3 3/4" to 5 1/2"7215°PolishedChrome-Plated Steel4363A11000000
    1010 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm3 3/4" to 5 1/2"7215°PolishedChrome-Plated SteelASME B107.1004363A12000000
     

    Stubby Reversible Ratcheting Combination Wrenches

    Image of Product. Front orientation. Combination Wrenches. Stubby Reversible Ratcheting Combination Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Reversible Ratcheting Combination Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Reversible Ratcheting Combination Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Stubby Reversible Ratcheting Combination Wrenches.

    12-Point

    Opening

    The ultimate tool for ratcheting in tight spaces. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. With the flick of a lever, these wrenches go from loosening nuts and bolts to tightening them.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Box End
    Open
    End
    Drive
    Size
    Overall
    Lg.
    Head Offset
    Angle
    Head
    Thick.
    Number
    of Teeth
    Opening
    Angle
    Head
    Thick.
    Appearance
    Each
    12-Point Opening
     
    Chrome-Plated Steel
    5/16"3 1/2"15°9/32"7215°5/32"Polished5666A718000000
    3/8"3 7/8"15°11/32"7215°3/16"Polished5666A71900000
    7/16"4"15°11/32"7215°7/32"Polished5666A200000
    1/2"4 1/2"15°13/32"7215°1/4"Polished5666A2100000
    9/16"4 11/16"15°13/32"7215°1/4"Polished5666A2200000
    5/8"5"15°15/32"7215°9/32"Polished5666A72100000
    11/16"5 1/4"15°1/2"7215°9/32"Polished5666A72200000
    3/4"5 1/2"15°17/32"7215°11/32"Polished5666A2300000
    8 mm3 1/2"15°9/32"7215°5/32"Polished5666A2400000
    9 mm3 3/4"15°5/16"7215°5/32"Polished5666A71100000
    10 mm3 7/8"15°11/32"7215°3/16"Polished5666A2500000
    11 mm4 1/8"15°11/32"7215°7/32"Polished5666A71200000
    12 mm4 1/4"15°3/8"7215°7/32"Polished5666A71300000
    13 mm4 1/2"15°13/32"7215°1/4"Polished5666A2600000
    14 mm4 11/16"15°13/32"7215°1/4"Polished5666A71400000
    15 mm4 7/8"15°7/16"7215°9/32"Polished5666A71500000
    16 mm5"15°15/32"7215°9/32"Polished5666A71600000
    17 mm5 3/16"15°1/2"7215°9/32"Polished5666A2700000
    18 mm5 1/4"15°1/2"7215°5/16"Polished5666A71700000
    19 mm5 1/2"15°17/32"7215°11/32"Polished5666A2800000
     

    Stubby Reversible Ratcheting Combination Wrench Sets

    Image of Product. Front orientation. Combination Wrenches. Stubby Reversible Ratcheting Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Reversible Ratcheting Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Reversible Ratcheting Combination Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Stubby Reversible Ratcheting Combination Wrench Sets.

    12-Point

    Opening

    The ultimate tool for ratcheting in tight spaces—in an array of sizes. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. With the flick of a lever, these wrenches go from loosening nuts and bolts to tightening them.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Box End
    Drive Size
    Overall Lg.
    Head Offset
    Angle
    Number
    of Teeth
    Open-End Opening
    Angle
    Appearance
    Each
    12-Point Opening
     
    Chrome-Plated Steel
    5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"3 1/2" to 5 1/2"15°6015°Polished5666A40000000
    8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm3 1/2" to 5 1/2"15°6015°Polished5666A29000000
     

    Stubby Ratcheting Combination Wrenches

    Image of Product. Front orientation. Combination Wrenches. Stubby Ratcheting Combination Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Ratcheting Combination Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Stubby Ratcheting Combination Wrenches.

    12-Point

    Opening

    Turn nuts and bolts in tight spaces without removing and repositioning these wrenches. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. When you need more leverage, opt for standard-length ratcheting wrenches.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Box End
    Open
    End
    Drive
    Size
    Overall
    Lg.
    Head
    Thick.
    Number
    of Teeth
    Opening
    Angle
    Head
    Thick.
    Appearance
    Each
    12-Point Opening
     
    Chrome-Plated Steel
    3/8"3 7/8"5/16"8015°3/16"Polished5666A12000000
    7/16"4"11/32"8015°7/32"Polished5666A1300000
    1/2"4 3/8"13/32"8015°7/32"Polished5666A1400000
    9/16"4 1/2"13/32"8015°1/4"Polished5666A1500000
    5/8"4 7/8"7/16"8015°9/32"Polished5666A1600000
    11/16"5"15/32"8015°1/2"Polished5666A1700000
    3/4"5 3/8"1/2"8015°11/32"Polished5666A1800000
    10 mm3 1/2"21/64"8015°3/16"Polished5666A3100000
    11 mm4"11/32"8015°13/64"Polished5666A3200000
    12 mm4 1/8"23/64"8015°7/32"Polished5666A3300000
    13 mm4 3/8"13/32"8015°7/32"Polished5666A3400000
    14 mm4 1/2"13/32"8015°1/4"Polished5666A3500000
    15 mm4 5/8"7/16"8015°3/16"Polished5666A3600000
    16 mm4 7/8"7/16"8015°9/32"Polished5666A3700000
    17 mm5"15/32"8015°19/64"Polished5666A3800000
    18 mm5 1/4"15/32"8015°5/16"Polished5666A3900000
    19 mm5 3/8"1/2"8015°21/64"Polished5666A4100000
     
    back to top