Material Material |
|---|
|
Travel Length Travel Length |
|---|
|
|
|
Static Pitch Moment Load Capacity Static Pitch MomentLoad Capacity |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Capacity per Pair Capacity per Pair |
|---|
|
|
Mounting Hole Location Mounting Hole Location |
|---|
|
Static Yaw Moment Load Capacity Static Yaw MomentLoad Capacity |
|---|
|
Static Roll Moment Load Capacity Static Roll MomentLoad Capacity |
|---|
|
About Moment Loads
More
Miniature Ball Bearing Carriages and Guide Rails
These tiny carriages and guide rails are sized for electronic and other precision applications. They come furnished as a complete unit (a carriage on a guide rail). Mount in any orientation without affecting load capacity.
Note: Ball bearings do not have a cage, so they’ll fall out if the carriage is removed from the guide rail.
Mount 1 mm wd. rails with mounting brackets (sold separately; order one for each end of the guide rail).
For technical drawings and 3-D models, click on a part number.
Carriage Mounting | Guide Rail Mounting | 440 Stainless Steel Carriages and Guide Rails | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd., mm | Rail Lg., mm | Rail Ht., mm | Dynamic Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | No. of Holes | Hole Thread Size | Hole Thread Pitch, mm | Hole Depth, mm | Fasteners Included | No. of Holes | For Fastener Thread Size | Hole Depth, mm | Fasteners Included | Each | |
Load Fastening From Top | |||||||||||||||||
| 1 | 42 | 1.4 | 15 | 2.5 | 4 | 6.5 | 2 | M1 | 0.25 | 0.9 | No | __ | __ | __ | __ | 0000000 | 0000000 |
| 1 | 84 | 1.4 | 15 | 2.5 | 4 | 6.5 | 2 | M1 | 0.25 | 0.9 | No | __ | __ | __ | __ | 0000000 | 000000 |
| 2 | 32 | 2 | 45 | 3.2 | 6 | 12.4 | 2 | M1.4 | 0.3 | 1.1 | No | 4 | M1 | 2 | No | 0000000 | 00000 |
| 2 | 40 | 2 | 45 | 3.2 | 6 | 12.4 | 2 | M1.4 | 0.3 | 1.1 | No | 5 | M1 | 2 | No | 000000 | 000000 |
| 2 | 56 | 2 | 45 | 3.2 | 6 | 12.4 | 2 | M1.4 | 0.3 | 1.1 | No | 7 | M1 | 2 | No | 0000000 | 000000 |
| 2 | 80 | 2 | 45 | 3.2 | 6 | 12.4 | 2 | M1.4 | 0.3 | 1.1 | No | 10 | M1 | 2 | No | 000000 | 000000 |
| 3 | 40 | 2.6 | 75 | 4 | 8 | 15.5 | 2 | M2 | 0.4 | 1.3 | No | 4 | M1.6 | 2.6 | No | 0000000 | 00000 |
| 3 | 60 | 2.6 | 75 | 4 | 8 | 15.5 | 2 | M2 | 0.4 | 1.3 | No | 6 | M1.6 | 2.6 | No | 000000 | 000000 |
| 3 | 80 | 2.6 | 75 | 4 | 8 | 15.5 | 2 | M2 | 0.4 | 1.3 | No | 8 | M1.6 | 2.6 | No | 0000000 | 000000 |
| 3 | 100 | 2.6 | 75 | 4 | 8 | 15.5 | 2 | M2 | 0.4 | 1.3 | No | 10 | M1.6 | 2.6 | No | 000000 | 000000 |
| 4 | 40 | 2.6 | 85 | 4 | 10 | 17 | 2 | M2 | 0.4 | 1.3 | No | 4 | M1.6 | 1.85 | Yes | 0000000 | 000000 |
| 4 | 70 | 2.6 | 85 | 4 | 10 | 17 | 2 | M2 | 0.4 | 1.3 | No | 7 | M1.6 | 1.85 | Yes | 0000000 | 000000 |
| 4 | 100 | 2.6 | 85 | 4 | 10 | 17 | 2 | M2 | 0.4 | 1.3 | No | 10 | M1.6 | 1.85 | Yes | 0000000 | 000000 |
| 6 | 60 | 2.8 | 95 | 4.5 | 12 | 20 | 2 | M2 | 0.4 | 1.6 | No | 4 | M2 | 1.3 | Yes | 0000000 | 000000 |
| 6 | 90 | 2.8 | 95 | 4.5 | 12 | 20 | 2 | M2 | 0.4 | 1.6 | No | 6 | M2 | 1.3 | Yes | 0000000 | 000000 |
| 6 | 120 | 2.8 | 95 | 4.5 | 12 | 20 | 2 | M2 | 0.4 | 1.6 | No | 8 | M2 | 1.3 | Yes | 0000000 | 000000 |
| Lg., mm | Ht., mm | Wd., mm | Material | For Mounting Fastener Thread Size | Mounting Hole Center-to-End, mm | Mounting Fasteners Included | Each | |
| 7 | 2.4 | 3 | Steel | M1.6 | 3.5 | No | 000000 | 000000 |
Miniature Pass-Through Drawer Slides
The size of a finger, these tiny slides open in both directions. All have ball bearings for smooth operation.
Stainless steel slides resist corrosion, so they're commonly used in medical, laboratory, and other fixtures that are often cleaned.
For technical drawings and 3-D models, click on a part number.
| Closed Lg. | Travel Lg. | Wd. | Ht. | Capacity per Pair (Mounting Location) | Roller Type | Mounting Fasteners Included | Mounting Screw Size | Pair | |
304 Stainless Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3 1/8" | 1 7/8" | 3/16" | 5/8" | 22 lbs. (Side) | Ball Bearing | No | No. 3 | 0000000 | 000000 |
| 3 15/16" | 2 11/16" | 3/16" | 5/8" | 24 lbs. (Side) | Ball Bearing | No | No. 3 | 0000000 | 00000 |
| 5 7/8" | 3 3/4" | 3/16" | 5/8" | 26 lbs. (Side) | Ball Bearing | No | No. 3 | 0000000 | 00000 |
Anodized Aluminum | |||||||||
| 2 3/4" | 1 3/16" | 3/16" | 5/8" | 6 1/2 lbs. (Side), 2 lbs. (Base) | Ball Bearing | No | No. 3 | 0000000 | 00000 |
| 3 15/16" | 1 9/16" | 3/16" | 5/8" | 11 lbs. (Side), 4 lbs. (Base) | Ball Bearing | No | No. 3 | 0000000 | 00000 |
| 5 7/8" | 3 1/16" | 3/16" | 5/8" | 15 lbs. (Side), 6 1/2 lbs. (Base) | Ball Bearing | No | No. 3 | 0000000 | 00000 |
Miniature Drawer Slides
Install these drawer slides in small-parts cabinets. Slides fully extend for access to the back of drawers. All have ball bearing rollers for smooth, quiet operation. Mount to the sides of drawer openings in cabinets.
Stainless steel slides are commonly used in laboratories and other environments that may get wet and require regular cleaning.
For technical drawings and 3-D models, click on a part number.
| Closed Lg. | Travel Lg. | Wd. | Ht. | Capacity per Pair, lbs. | Roller Type | Mounting Fasteners Included | Mounting Screw Size | Pair | |
304 Stainless Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3 1/8" | 3 13/16" | 3/8" | 5/8" | 22 | Ball Bearing | No | No. 3 | 0000000 | 000000 |
| 3 15/16" | 4 15/16" | 3/8" | 5/8" | 24 | Ball Bearing | No | No. 3 | 0000000 | 00000 |
| 5 7/8" | 6 15/16" | 3/8" | 5/8" | 26 | Ball Bearing | No | No. 3 | 0000000 | 00000 |
Anodized Aluminum | |||||||||
| 3 1/8" | 3" | 7/16" | 5/8" | 4 | Ball Bearing | No | No. 3 | 0000000 | 00000 |
| 3 15/16" | 4 9/16" | 7/16" | 5/8" | 6 1/2 | Ball Bearing | No | No. 3 | 0000000 | 00000 |
| 5 7/8" | 5 15/16" | 7/16" | 5/8" | 8 1/2 | Ball Bearing | No | No. 3 | 0000000 | 00000 |
V-Belts
