Miniature Torx Drivers | McMaster-Carr

Filter by

Drive Style

System of Measurement

Drive Size

Driver Style

Sold As

Overall Length

Grip Style

Number of Pieces

Container Type

Finish

Driver Type

Handle Material

Length

Performance

Electrically Insulating

Material

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

Shaft Length

Shaft Overall Width

Specifications Met

79 Products

Precise-Control Screwdriver Sets

Plain Grip

Make fine-tuned adjustments on a variety of small, delicate components, such as electronics, miniature models, and microscopes. These screwdriver sets give you better control than a standard screwdriver to avoid stripping tiny screws or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.

Black-Oxide Steel—These screwdrivers withstand occasional moisture.

Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.

Plain Grip—Made of hard plastic for durability.

	Includes	Material	Grip Style	Container Type		Each
Torx



	4	T1 Torx Screwdriver—4 15/16" O'all Lg. T2 Torx Screwdriver—4 15/16" O'all Lg. T3 Torx Screwdriver—4 15/16" O'all Lg. T4 Torx Screwdriver—4 15/16" O'all Lg.	Black-Oxide Steel	Plain	Plastic Pouch	00000000	000000


	7	T5 Torx Screwdriver—4 3/4" O'all Lg. T6 Torx Screwdriver—4 3/4" O'all Lg. T7 Torx Screwdriver—4 3/4" O'all Lg. T8 Torx Screwdriver—4 3/4" O'all Lg. T9 Torx Screwdriver—5 3/4" O'all Lg. T10 Torx Screwdriver—5 3/4" O'all Lg. T15 Torx Screwdriver—6 3/4" O'all Lg.	Chrome-Plated Steel	Plain	—	00000000	00000


	Hex, Phillips, Slotted, Torx



			50	5 3/4" Lg. Chip Lifter Hex Screwdrivers: 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex Screwdrivers: 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32" Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10	Chrome-Plated Steel	Plain	Metal Stand	00000000	000000

Static-Control Precise-Control Screwdriver Sets

Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, these meet IEC requirements to drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.

Warning: These screwdrivers conduct electricity. Do not use them near active power sources.

Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.

Plain Grip—Made of hard plastic for durability.

	Includes	Material	Grip Style	Container Type	Static Control Rating	Surface Resistivity	Specs. Met		Each
Torx



	7	T4 Torx Screwdriver—4 23/32" O'all Lg. T5 Torx Screwdriver—4 23/32" O'all Lg. T6 Torx Screwdriver—4 23/32" O'all Lg. T7 Torx Screwdriver—4 23/32" O'all Lg. T8 Torx Screwdriver—4 23/32" O'all Lg. T9 Torx Screwdriver—5 23/32" O'all Lg. T10 Torx Screwdriver—5 23/32" O'all Lg.	Chrome-Plated Steel	Plain	—	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	000000


	Hex, Phillips, Slotted, Torx



			50	5 3/4" Lg. Chip Lifter Hex Screwdrivers: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Hex Screwdrivers: 1/16", 3/32", 7/64", 1/8" Nutdrivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 1/8", 5/32", 3/16", 1/4" Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157" Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20	Chrome-Plated Steel	Plain	Metal Stand	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	000000

Torque-Limiting Key Sets


L-Key	T-Handle

The assorted keys in these sets have a small handle that prevents you from generating too much torque when turning a fastener. They are often used to install carbide inserts in cutting tools.

T-Handle—These keys have a wider handle than L-keys, so they're easier to grip.

Black-Oxide Steel—The coating offers minimal corrosion resistance, so these keys are best for dry environments.

Black Phosphate-Coated Steel—These keys resist rust in most wet and outdoor applications, however, they won't hold up to salt water and chemicals.

	Grip Style	Container Type		Each
Torx







	L-Key

	7	T6 Torx L-Key (2 7/8" O'all Lg.) T7 Torx L-Key (2 7/8" O'all Lg.) T8 Torx L-Key (2 7/8" O'all Lg.) T9 Torx L-Key (2 7/8" O'all Lg.) T10 Torx L-Key (3" O'all Lg.) T15 Torx L-Key (3" O'all Lg.) T20 Torx L-Key (3" O'all Lg.)	Black Phosphate-Coated Steel	Cushion	Plastic Stand	00000000	000000




			T-Handle

			7	T6 Torx T-Handle Key (2 3/4" O'all Lg.) T7 Torx T-Handle Key (2 3/4" O'all Lg.) T8 Torx T-Handle Key (2 15/16" O'all Lg.) T9 Torx T-Handle Key (2 15/16" O'all Lg.) T10 Torx T-Handle Key (2 15/16" O'all Lg.) T15 Torx T-Handle Key (3 1/8" O'all Lg.) T20 Torx T-Handle Key (3 1/8" O'all Lg.)	Black-Oxide Steel	Cushion	Metal Stand	0000000	00000


			Torx Plus







							L-Key

							7	IP6 Torx Plus Flag-Handle Key (3 5/16" O'all Lg.) IP7 Torx Plus Flag-Handle Key (3 5/16" O'all Lg.) IP8 Torx Plus Flag-Handle Key (3 5/16" O'all Lg.) IP9 Torx Plus Flag-Handle Key (3 5/16" O'all Lg.) IP10 Torx Plus Flag-Handle Key (3 1/2" O'all Lg.) IP15 Torx Plus Flag-Handle Key (3 1/2" O'all Lg.) IP20 Torx Plus Flag-Handle Key (3 1/2" O'all Lg.)	Black Phosphate-Coated Steel	Cushion	Plastic Stand	0000000	00000




									T-Handle

									7	IP6 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP7 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP8 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP9 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP10 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP15 Torx Plus T-Handle Key (5 7/8" O'all Lg.) IP20 Torx Plus T-Handle Key (5 7/8" O'all Lg.)	Black-Oxide Steel	Cushion	Metal Stand	0000000	00000

Electrically Insulating Precise-Control Screwdrivers

Safely tweak tiny screws in capacitors, terminal blocks, and other small, energized components. An insulated handle and shaft absorb up to 1,000 volts of electric shock to meet IEC, EN, or ASTM standards. Also known as precision and miniature screwdrivers, they give you better control than a standard screwdriver for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.

Plain Grip—Made of hard plastic for durability.

			Shaft
	Drive Size	Overall Lg.	Lg.	Overall Wd.	Grip Style	Specs. Met		Each
Torx







				Plastic-Coated Steel

				T5	5 1/2"	1 9/16"	3/16"	Plain	IEC 60900, EN 60900	00000000	000000


				T6	5 1/2"	1 9/16"	3/16"	Plain	IEC 60900, EN 60900	00000000	00000
				T7	5 1/2"	1 9/16"	3/16"	Plain	IEC 60900, EN 60900	00000000	00000
				T8	6 5/16"	2 3/8"	3/16"	Plain	IEC 60900, EN 60900	00000000	00000
				T9	6 5/16"	2 3/8"	3/16"	Plain	IEC 60900, EN 60900	00000000	00000
				T10	6 5/16"	2 3/8"	3/16"	Plain	IEC 60900, EN 60900	00000000	00000
				T15	6 7/8"	3"	7/32"	Plain	IEC 60900, EN 60900	00000000	00000

Precise-Control Screwdrivers

Plain Grip

Make fine-tuned adjustments on small, delicate components, such as electronics, miniature models, and microscopes. These screwdrivers give you better control than a standard screwdriver to avoid stripping tiny screws or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.

Black-Oxide Steel—These screwdrivers withstand occasional moisture.

Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.

Plain Grip—Made of hard plastic for durability.

			Shaft
	Drive Size	Overall Lg.	Lg.	Overall Wd.	Grip Style		Each
Torx







				Black-Oxide Steel

				T1	4 15/16"	1 1/4"	3/32"	Plain	00000000	000000


				T2	4 15/16"	1 1/4"	3/32"	Plain	00000000	00000




						Chrome-Plated Steel

						T3	4 3/4"	1 5/8"	1/8"	Plain	00000000	0000


						T4	4 3/4"	1 5/8"	1/8"	Plain	00000000	0000
						T5	4 3/4"	1 5/8"	1/8"	Plain	00000000	0000
						T6	4 3/4"	1 5/8"	1/8"	Plain	00000000	0000
						T7	4 3/4"	1 5/8"	1/8"	Plain	00000000	0000
						T8	4 3/4"	1 5/8"	1/8"	Plain	00000000	0000
						T9	5 3/4"	2"	1/8"	Plain	00000000	0000
						T10	5 3/4"	2"	1/8"	Plain	00000000	0000
						T15	6 3/4"	2 3/8"	1/8"	Plain	00000000	0000
						T20	6 3/4"	2 3/8"	5/32"	Plain	00000000	0000

Torque-Limiting Keys

L-Key

T-Handle

Often used to install carbide inserts in cutting tools, these keys have a small handle that prevents you from generating too much torque when turning a fastener.

T-Handle—These keys have a wider handle than L-keys, so they're easier to grip.

Black-Oxide Steel—The coating offers minimal corrosion resistance, so these keys are best for dry environments.

Black Phosphate-Coated Steel—These keys resist rust in most wet and outdoor applications, however, they won't hold up to salt water and chemicals.

	Drive Size	Overall Lg.	Material	Grip Style		Each
Torx







				L-Key

				T5	2 7/8"	Black Phosphate-Coated Steel	Cushion	00000000	00000


				T6	2 7/8"	Black Phosphate-Coated Steel	Cushion	00000000	0000
				T7	2 7/8"	Black Phosphate-Coated Steel	Cushion	00000000	0000
				T8	2 7/8"	Black Phosphate-Coated Steel	Cushion	00000000	0000
				T9	2 7/8"	Black Phosphate-Coated Steel	Cushion	00000000	0000
				T10	3"	Black Phosphate-Coated Steel	Cushion	00000000	0000
				T15	3"	Black Phosphate-Coated Steel	Cushion	00000000	0000
				T20	3"	Black Phosphate-Coated Steel	Cushion	00000000	0000




						T-Handle

						T6	2 3/4"	Black-Oxide Steel	Cushion	0000000	0000


						T7	2 3/4"	Black-Oxide Steel	Cushion	0000000	0000
						T8	2 15/16"	Black-Oxide Steel	Cushion	0000000	0000
						T9	2 15/16"	Black-Oxide Steel	Cushion	0000000	0000
						T10	2 15/16"	Black-Oxide Steel	Cushion	0000000	0000
						T15	3 1/8"	Black-Oxide Steel	Cushion	0000000	0000
						T20	3 1/8"	Black-Oxide Steel	Cushion	0000000	0000


						Torx Plus







										L-Key

										IP6	3 5/16"	Black Phosphate-Coated Steel	Cushion	0000000	0000


										IP7	3 5/16"	Black Phosphate-Coated Steel	Cushion	0000000	0000
										IP8	3 5/16"	Black Phosphate-Coated Steel	Cushion	0000000	0000
										IP9	3 5/16"	Black Phosphate-Coated Steel	Cushion	0000000	0000
										IP10	3 1/2"	Black Phosphate-Coated Steel	Cushion	0000000	0000
										IP15	3 1/2"	Black Phosphate-Coated Steel	Cushion	0000000	0000
										IP20	3 1/2"	Black Phosphate-Coated Steel	Cushion	0000000	0000




												T-Handle

												IP5	2 3/4"	Black-Oxide Steel	Cushion	0000000	0000


IP6												2 3/4"	Black-Oxide Steel	Cushion	0000000	0000
IP7	2 3/4"											Black-Oxide Steel	Cushion	0000000	0000
IP8	2 3/4"											Black-Oxide Steel	Cushion	0000000	0000
IP9	3"											Black-Oxide Steel	Cushion	0000000	0000
IP10	3"											Black-Oxide Steel	Cushion	0000000	0000
IP15	3 1/8"	Black-Oxide Steel										Cushion	0000000	0000
IP20	3 1/8"	Black-Oxide Steel	Cushion									0000000	0000

Screw-Holding Torque-Limiting Key Sets

When you've only got one free hand to fasten, reach for these keys. A retaining ring on the tip grips screws securely so they won't fall off as you tighten. Use these sets when working above crevices or when fastening tiny screws, such as those on carbide inserts. The small handle stops you from generating too much torque when turning a fastener.

T-Handle—These keys have a wider handle than L-keys, so they're easier to grip.

Black-Oxide Steel—The coating offers minimal corrosion resistance, so these keys are best for dry environments.

	Grip Style	Screw-Holding Mechanism	Container Type		Each
Torx







	T-Handle

	7	T6 Torx T-Handle Key (2 3/4" O'all Lg.) T7 Torx T-Handle Key (2 3/4" O'all Lg.) T8 Torx T-Handle Key (3" O'all Lg.) T9 Torx T-Handle Key (3" O'all Lg.) T10 Torx T-Handle Key (3" O'all Lg.) T15 Torx T-Handle Key (3 1/8" O'all Lg.) T20 Torx T-Handle Key (3 1/8" O'all Lg.)	Black-Oxide Steel	Cushion	Retaining Ring	Metal Stand	0000000	000000

Electrically Insulating Precise-Control Screwdriver Sets

Plain Grip—Made of hard plastic for durability.

	Includes	Material	Grip Style	Container Type	Specs. Met		Each
Torx



	7	T5 Torx Screwdriver—5 1/2" O'all Lg. T6 Torx Screwdriver—5 1/2" O'all Lg. T7 Torx Screwdriver—5 1/2" O'all Lg. T8 Torx Screwdriver—6 5/16" O'all Lg. T9 Torx Screwdriver—6 5/16" O'all Lg. T10 Torx Screwdriver—6 5/16" O'all Lg. T15 Torx Screwdriver—6 7/8" O'all Lg.	Plastic-Coated Steel	Plain	Plastic Case	IEC 60900, EN 60900	00000000	0000000

Screw-Holding Torque-Limiting Keys

When you've only got one free hand to fasten, reach for these keys. A retaining ring on the tip grips screws securely so they won't fall off as you tighten. Use them when working above crevices or when fastening tiny screws, such as those on carbide inserts. The small handle stops you from generating too much torque when turning a fastener.

T-Handle—These keys have a wider handle than L-keys, so they're easier to grip.

Black-Oxide Steel—The coating offers minimal corrosion resistance, so these keys are best for dry environments.

	Grip Style	Screw-Holding Mechanism		Each
Torx







	T-Handle

	T6	2 3/4"	Black-Oxide Steel	Cushion	Retaining Ring	0000000	00000


	T7	2 3/4"	Black-Oxide Steel	Cushion	Retaining Ring	0000000	0000
	T8	3"	Black-Oxide Steel	Cushion	Retaining Ring	0000000	0000
	T9	3"	Black-Oxide Steel	Cushion	Retaining Ring	0000000	0000
	T10	3"	Black-Oxide Steel	Cushion	Retaining Ring	0000000	0000
	T15	3 1/8"	Black-Oxide Steel	Cushion	Retaining Ring	0000000	0000
	T20	3 1/8"	Black-Oxide Steel	Cushion	Retaining Ring	0000000	0000

Static-Control Precise-Control Screwdrivers

Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, they drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.

Warning: These screwdrivers conduct electricity. Do not use them near active power sources.

Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.

Plain Grip—Made of hard plastic for durability.

Static Dissipative—Drain static charges faster than antistatic screwdrivers. They meet IEC requirements for preventing the buildup of electrostatic discharge.

			Shaft
	Drive Size	Overall Lg.	Lg.	Overall Wd.	Grip Style	Static Control Rating	Surface Resistivity	Specs. Met		Each
Torx







				Chrome-Plated Steel

				T1	5 5/16"	1 5/8"	3/32"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	000000


				T2	5 5/16"	1 5/8"	3/32"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	00000
				T3	5 5/16"	1 5/8"	3/32"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	00000
				T4	5 5/16"	1 5/8"	3/32"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	00000
				T5	5 5/16"	1 5/8"	3/32"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	00000
				T6	5 5/16"	1 5/8"	3/32"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	00000
				T7	5 5/16"	1 5/8"	3/32"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	00000
				T8	5 5/16"	1 5/8"	3/32"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	00000
				T9	5 11/16"	2"	1/8"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	00000
				T10	5 11/16"	2"	1/8"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	00000
				T15	6 11/16"	2 3/8"	5/32"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	00000


				T20	6 11/16"	2 3/8"	5/32"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	00000