Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.

Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required.

Polished on one side to a reflective, mirror-like finish.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

A static-dissipative coating on this cast acrylic prevents electrostatic discharge from damaging sensitive electronic equipment.

Laminate or mold this plastic film onto credit card signing screens, signs, and other surfaces for a see-through protective layer that won’t scratch.

Often used in security doors and windows to protect against forced entry, this laminated polycarbonate is nearly impenetrable.

A static-dissipative coating on this polyester film prevents electrostatic discharge from damaging sensitive electronic equipment.

Resistant to scratches and scuffs, mirrored acrylic is an economical alternative to mirrored polycarbonate.

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

Neoprene is also known as chloroprene. It offers good oil and abrasion resistance.

This polyurethane combines the shock absorbing qualities of rubber with the tear resistance of plastic. Use it for high-tension applications such as conveyor belts, as well as for high-wear applications such as cutting surfaces, bumpers, and liners.

Sunlight, ozone, and water won’t affect these sheets and strips.

Temperatures as low as –70° F have no effect on these fluorosilicone sheets and strips.

A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.

These magnets are made of corrosion-resistant ceramic and bonded with rubber for flexibility.

Unlike other flexible magnets, these resist demagnetizing at temps up to 250° F.

Cut these sheets to create a customized, permanent bond in the shape you need.

Cut these sheets to the shape you need for a custom fit.

Silicone maintains its flexibility across a wide range of temperatures.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Even after extended compression, these sheets and strips will bounce back to shape.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

Often used for impact pads, gaskets, and enclosure seals, these polyurethane foam sheets and strips absorb shock better than other resilient foam.

These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.

Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.

Commonly used as curtains and in sealing applications.

This low-pile velvet cushions and damps vibration.

The best sound absorbers of all our rigid sheets, use to quiet noisy areas in your facility. They're peaked on one side for more sound-absorbing area than flat sheets. Made of melamine, they have an acrylic resin finish that resists dust and dirt and wipes clean.