McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    27 Products

    Starrett High-Accuracy Combination Squares

    Replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. The blade on these squares meets Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size. Blades are labeled with numeric increments that are less than 1" for quick reading.
    Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber.
    Image of Product. Inch. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber, Inch.

    Inch

    Square head checks 90° angles.
    Protractor head measures angles.
    Center head identifies the center on pipes, rods, and shafts.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Color
    Color
    Type
    Head
    Lg.
    Each
    Inch
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.005"1"3/32"SteelSilverBlackEtched4 1/2"2108A570000000
    18"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.006"1"3/32"SteelSilverBlackEtched4 1/2"2108A58000000
    24"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.007"1"3/32"SteelSilverBlackEtched4 1/2"2108A59000000
     
    Replacements for Squares
    Each
    Replacement Case for Combination Squares with 12" Long Blade4264N11000000
    Replacement Lockbolt for Square, Center, and Protractor Heads1955A830000
    Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber.
    Image of Product. Inch/Metric. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber, Metric, Inch, 4/32" Numeric Graduations - 2, 10 mm Numeric Graduations.

    Inch/Metric

    Image of Product. Inch. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Starrett High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber, Inch, 4/32" Numeric Graduations, 8/64" Numeric Graduations - 2.

    Inch

    Square head checks 90° angles.
    Protractor head measures angles.
    Center head identifies the center on pipes, rods, and shafts.
    Hardened Steel Square Head—Hardened-steel square heads are more durable and last longer than cast iron square heads.
    Satin Blade—Satin blade appearance is corrosion resistant and reduces glare.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Hardened Steel
    Square Head
    Blade Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Appearance
    Color
    Color
    Type
    Head
    Lg.
    Each
    Head
    Lg.
    Each
    Inch
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.005"1"3/32"SteelSilverBlackEtched4 1/2"2108A510000000———0
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.005"1"3/32"SteelSatinChrome, SilverBlackEtched———03 5/8"2107A510000000
    12"1/32" (4/32"), 1/64" (8/64")1/50" (1/10"), 1/100" (1/10")-0.0035" to 0.005"1"3/32"SteelSilverBlackEtched4 1/2"2108A54000000———0
    12"1/32" (4/32"), 1/64" (8/64")1/50" (1/10"), 1/100" (1/10")-0.0035" to 0.005"1"3/32"SteelSatinChrome, SilverBlackEtched———03 5/8"2107A54000000
    18"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.006"1"3/32"SteelSilverBlackEtched4 1/2"2108A52000000———0
    18"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.006"1"3/32"SteelSatinChrome, SilverBlackEtched———03 5/8"2107A52000000
    18"1/32" (4/32"), 1/64" (8/64")1/50" (1/10"), 1/100" (1/10")-0.0035" to 0.006"1"3/32"SteelSatinChrome, SilverBlackEtched———03 5/8"2107A55000000
    24"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.007"1"3/32"SteelSilverBlackEtched4 1/2"2108A53000000———0
    24"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0035" to 0.007"1"3/32"SteelSatinChrome, SilverBlackEtched———03 5/8"2107A53000000
    24"1/32" (4/32"), 1/64" (8/64")1/50" (1/10"), 1/100" (1/10")-0.0035" to 0.007"1"3/32"SteelSatinChrome, SilverBlackEtched———03 5/8"2107A56000000
     
    Inch/Metric
    11 3/4"/300 mm0.5 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/64" (8/64")-0.0035" to 0.005"/
    -0.09 mm to 0.15 mm
    1"3/32"SteelSilverBlackEtched4 1/2"2108A55000000———0
    11 3/4"/300 mm0.5 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/64" (8/64")-0.0035" to 0.005"/
    -0.09 mm to 0.15 mm
    1"3/32"SteelSatinChrome, SilverBlackEtched———03 5/8"2107A57000000
    23 1/2"/600 mm0.5 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/64" (8/64")-0.0035" to 0.007"/
    -0.11 mm to 0.25 mm
    1"3/32"SteelSilverBlackEtched4 1/2"2108A56000000———0
    23 1/2"/600 mm0.5 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/64" (8/64")-0.0035" to 0.007"/
    -0.11 mm to 0.25 mm
    1"3/32"SteelSatinChrome, SilverBlackEtched———03 5/8"2107A58000000
     
    Replacements for Squares
    Each
    Replacement Case for Combination Squares with 12" Long Blade4264N11000000
    Replacement Lockbolt for Square, Center, and Protractor Heads1955A830000

    Combination Squares

    Replace your try square, miter square, depth gauge, marking gauge, 90° level, ruler, and scriber with one tool. Blades labeled with numeric increments that are less than 1" are quick-reading.
    Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head with Built-In Level, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head with Built-In Level, and Scriber.
    Image of Product. Inch/Metric. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head with Built-In Level, and Scriber, Metric, Inch.

    Inch/Metric

    Square head checks 90° angles.
    Protractor head measures angles.
    Center head identifies the center on pipes, rods, and shafts.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Aluminum Square Head
    Blade Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Wd.
    Thk.
    Material
    Color
    Color
    Type
    Head
    Lg.
    Each
    Inch/Metric
    12"/300 mm1 mm (10 mm), 1/32" (4/32")1 mm (10 mm), 1/16" (1")1"3/32"SteelSilverBlackEtched4 1/4"2007A8000000
     

    Starrett High-Accuracy Combination Square Heads

    Attach to Starrett High-Accuracy Combination Square Blades with the included lockbolts.
    Protractor Heads
    Image of Product. Front orientation. Combination Square Heads. Starrett High-Accuracy Combination Square Heads, Protractor Heads.
    Protractor heads measure angles.
    Cast Iron—Cast iron heads are durable, so they resist dents and scratches. However, they corrode more easily than zinc heads.
    Protractor
    Cast Iron
    For Blade
    Lg.
    Reversible
    Features
    Angle Measured
    Range
    Graduations (Numeric
    Increments)
    Each
    12" to 48"NoBuilt-In Level0° to 180°1° (10°)1955A290000000
    12" to 48"YesBuilt-In Level0° to 180°1° (10°)1955A25000000
    Replacement Square Head Lockbolts
    Image of Product. Front orientation. Square Head Lockbolts. Starrett High-Accuracy Combination Square Heads.
    For Head Style
    For Blade Lg.
    Each
    Center, Square, Protractor12" to 36"/300 mm to 600 mm1955A8300000

    High-Accuracy Combination Squares

    Use these squares in place of your try square, miter square, depth gauge, height gauge, center-point finder, and level. Blades are labeled with numeric increments that are less than 1" for quick reading.
    Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber.
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Squares. High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Reversible Protractor Head, and Scriber, Inch.

    Inch

    Square head checks 90° angles.
    Protractor head measures angles.
    Center head identifies the center on pipes, rods, and shafts.
    Hardened Cast Iron Square Head—Hardened cast iron square heads are more durable and last longer than cast iron square heads.
    Satin Blade—Satin blade appearance is corrosion resistant and reduces glare.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Hardened Cast
    Iron Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Appearance
    Color
    Color
    Type
    Head
    Lg.
    Each
    Each
    Inch
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.0025" to 0.0025"1"3/32"SteelSatinChrome, SilverBlackEtched4 1/2"21115A11000000021115A150000000
     
    Replacement Square Head Lockbolts
    Each
    Replacement Lockbolt21115A3600000

    High-Accuracy Combination Square Heads

    Attach to High-Accuracy Combination Square Blades with the included lockbolts.
    Protractor Heads
    Image of Product. Front orientation. Combination Square Heads. High-Accuracy Combination Square Heads, Protractor Heads.
    Protractor heads measure angles.
    Cast Iron—Cast iron heads are durable, so they resist dents and scratches. However, they corrode more easily than zinc heads.
    Combination Square Protractor Heads
    Replacement Square
    Head Lockbolts
    Protractor
    For Blade
    Lg.
    Reversible
    Angle Measured
    Range
    Graduations (Numeric
    Increments)
    Each
    Each
    Cast Iron
    12" to 24"Yes0° to 180°1° (10°)21115A3200000021115A3600000
     

    Scratch-Resistant High-Accuracy Combination Squares

    A titanium coating protects the blade against scratches and wear. Use these squares to replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. Blades are labeled with numeric increments that are less than 1" for quick reading.
    Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber
    Image of Product. Front orientation. Contains Annotated. Squares. Scratch-Resistant High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber.
    Image of Product. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. Squares. Scratch-Resistant High-Accuracy Combination Squares, Blades with Square Head with Built-In Level, Center Head, Protractor Head, and Scriber, Inch.

    Inch

    Square head checks 90° angles.
    Protractor head measures angles.
    Center head identifies the center on pipes, rods, and shafts.
    Etched—Etched graduation marks are wear resistant.
    Blade
    Graduation
    Cast Iron
    Square Head
    Blade
    Lg.
    Front Graduations (Numeric
    Graduations)
    Back Graduations (Numeric
    Graduations)
    Lg. Accuracy
    Wd.
    Thk.
    Material
    Color
    Color
    Type
    Head
    Lg.
    Each
    Inch
    12"1/32" (4/32"), 1/64" (8/64")1/8" (1"), 1/16" (1")-0.002" to 0.002"1"3/32"Titanium-Coated SteelGoldBlackEtched4 1/2"21155A360000000
     
    back to top