Maximum Measurement Maximum Measurement |
|---|
|
|
|
Manufacturer Model Number Manufacturer Model Number |
|---|
Contact Point Length Contact Point Length |
|---|
|
|
|
Dial Type Dial Type |
|---|
|
Dial Hand Direction Dial Hand Direction |
|---|
|
Industry Designation Industry Designation |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Mitutoyo Continuous Dial Plunger-Style Variance Indicators
For direct measurements, these indicators have a continuous dial numbered clockwise around the face. A spring-loaded plunger retracts and extends to measure objects. Rotate the dial face for viewing at multiple angles.
Jeweled bearings are more sensitive and wear resistant than plain bearings for a longer service life.
For technical drawings and 3-D models, click on a part number.
Dial | Contact Point | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Manufacturer Model Number | Each | |
Plain | |||||||||||||
| 0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 0.118" | 1.366" | 4-48 | 2416A | 0000000 | 0000000 |
| 0"-1.000" | 0.0005" | ±0.0005" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50 | 0.118" | 1.366" | 4-48 | 2776S | 0000000 | 000000 |
Jeweled | |||||||||||||
| 0"-0.250" | 0.001" | ±0.001" | AGD Group 1 | 3/8" | 1/4" | 1 5/8" | 0-100 | 0.118" | 0.587" | 4-48 | 1410A-10 | 0000000 | 000000 |
| 0"-0.500" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-10 | 0.118" | 0.846" | 4-48 | 2358A-10 | 000000 | 000000 |
| 0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 0.118" | 1.366" | 4-48 | 2416S-10 | 0000000 | 000000 |
| 0"-2.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 0.118" | 2.35" | 4-48 | 2424S-19 | 0000000 | 000000 |
Mitutoyo Continuous Dial Plunger-Style Variance Indicators with Calibration Certificate
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. They have a continuous dial numbered clockwise around the face for direct measurements. A spring-loaded plunger retracts and extends to measure objects. Rotate the dial face for viewing at multiple angles.
Jeweled bearings are more sensitive and wear resistant than plain bearings for a longer service life.
For technical drawings and 3-D models, click on a part number.
Dial | Contact Point | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Manufacturer Model Number | Each | |
Plain | |||||||||||||
| 0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 0.118" | 1.366" | 4-48 | 2416S | 0000000 | 0000000 |
| 0"-1.000" | 0.0005" | ±0.0005" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50 | 0.118" | 1.366" | 4-48 | 2776S | 0000000 | 000000 |
Jeweled | |||||||||||||
| 0"-0.250" | 0.001" | ±0.001" | AGD Group 1 | 3/8" | 1/4" | 1 5/8" | 0-100 | 0.118" | 0.587" | 4-48 | 1410A-10 | 0000000 | 000000 |
| 0"-0.500" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-10 | 0.118" | 0.846" | 4-48 | 2358A-10 | 0000000 | 000000 |
| 0"-1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 0.118" | 1.366" | 4-48 | 2416S-10 | 0000000 | 000000 |
| 0"-2.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 0.118" | 2.35" | 4-48 | 2424S-19 | 0000000 | 000000 |
Mitutoyo Plus/Minus Dial Plunger-Style Variance Indicators
For comparative measurements of a part's tolerance against a reference measurement, these indicators have a balanced dial with positive values on one side and negative values on the other side. A spring-loaded plunger retracts and extends to measure objects. All have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles.
For technical drawings and 3-D models, click on a part number.
Dial | Contact Point | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Manufacturer Model Number | Each | |
| 0"-0.025" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-5-0 | 0.118" | 0.366" | 4-48 | 2803A-10 | 0000000 | 0000000 |
| 0"-0.025" | 0.0001" | ±0.0002" | AGD Group 0 | 3/8" | 1/4" | 1 7/32" | 0-5-0 | 0.118" | 0.28" | 4-48 | 1925T-10 | 0000000 | 000000 |
| 0"-0.050" | 0.0005" | ±0.0005" | AGD Group 0 | 3/8" | 1/4" | 1 7/32" | 0-10-0 | 0.118" | 0.31" | 4-48 | 1923T-10 | 0000000 | 000000 |
Mitutoyo Plus/Minus Dial Plunger-Style Variance Indicators with Calibration Certificate
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. They have a balanced dial with positive values on one side of the zero and negative values on the other side for comparative measurements of a part's tolerance against a reference measurement. A spring-loaded plunger retracts and extends to measure objects. All have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles.
For technical drawings and 3-D models, click on a part number.
Dial | Contact Point | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Manufacturer Model Number | Each | |
| 0"-0.025" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-5-0 | 0.118" | 0.366" | 4-48 | 2803A-10 | 0000000 | 0000000 |
| 0"-0.025" | 0.0001" | ±0.0002" | AGD Group 0 | 3/8" | 1/4" | 1 7/32" | 0-5-0 | 0.118" | 0.28" | 4-48 | 1925T-10 | 0000000 | 000000 |
| 0"-0.050" | 0.0005" | ±0.0005" | AGD Group 0 | 3/8" | 1/4" | 1 7/32" | 0-10-0 | 0.118" | 0.31" | 4-48 | 1923T-10 | 0000000 | 000000 |
Mitutoyo Dial Plunger-Style Variance Indicators with Magnetic-Base Holder
The magnetic base has a V-grooved bottom to provide a solid mount on flat and curved metal surfaces. It also has a magnetic release switch for easy setups.
Indicator has a continuous dial numbered clockwise around the face for direct measurements. A spring-loaded plunger retracts and extends to measure objects. Rotate the dial face for viewing at multiple angles.
Dial | Contact Point | Upright Post | Arm | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Industry Designation | Indicator Mount. Stem Dia. | Mount. Lug Hole Dia. | Dia. | Reading | Head Dia. | Lg. | Mount. Thread Size | Base Magnetic Pull, lbs. | Dia. | Ht. | Lg. | Flexibility | Mfr. Model No. | Each | |
Lug and Stem Mount | ||||||||||||||||||
| 0"-1" | 0.001" | ±0.002" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-100 | 0.118" | 1.366" | 4-48 | 135 | 1/2" | 7" | 6 1/2" | Rigid | 646PKA079A | 000000 | 0000000 |
Mitutoyo Dial Lever-Style Variance Indicator Sets
Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included dovetail-to-stem and height gauge/tool post attachments with the swivel clamp to mount the indicator.
For technical drawings and 3-D models, click on a part number.
Dial | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Mounting Stem Dia. | Number of Dovetail Mounts | Reading | Dia. | Includes | Manufacturer Model No. | Each | |
| 0"-0.008" | 0.0001" | ±0.0001" | 3/8" | 3 | 0-4-0 | 1 9/16" | 0.039", 0.079", and 0.157" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | 513-403-10T | 0000000 | 0000000 |
| 0"-0.016" | 0.0001" | ±0.0002" | 3/8" | 3 | 0-4-0 | 1 9/16" | 0.039", 0.079", and 0.157" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | 513-443-16T | 0000000 | 000000 |
| 0"-0.03" | 0.0005" | ±0.0005" | 3/8" | 3 | 0-15-0 | 1 9/16" | 0.039", 0.079", and 0.157" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | 513-412-10T | 0000000 | 000000 |
| 0"-0.06" | 0.0005" | ±0.0005" | 3/8" | 3 | 0-15-0 | 1 9/16" | 0.039", 0.079", and 0.157" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | 513-442-16T | 0000000 | 000000 |
| 0"-0.06" | 0.0005" | ±0.0005" | 3/8" | 3 | 0-15-0 | 1 9/16" | 0.039", 0.079", and 0.157" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | 513-446-16T | 0000000 | 000000 |
| 0mm-0.2mm | 0.002mm | ±0.003 mm | 3/8" | 3 | 0-100-0 | 1 9/16" | 0.039", 0.079", and 0.157" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | 513-405-10T | 0000000 | 000000 |
| 0mm-0.8mm | 0.01mm | ±0.008 mm | 3/8" | 3 | 0-40-0 | 1 9/16" | 0.039", 0.079", and 0.157" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | 513-404-10T | 0000000 | 000000 |
Mounting Thread | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Size | Pitch, mm | Material | Manufacturer Model Number | Each | |
| 0.079" | 0.441" | M1.7 | 0.35 | Carbide | 103010 | 000000 | 000000 |
| 0.079" | 0.453" | M1.7 | 0.35 | Carbide | 136075 | 000000 | 00000 |
| 0.079" | 0.61" | M1.7 | 0.35 | Carbide | 21CZB064 | 000000 | 0000 |
| 0.079" | 0.65" | M1.7 | 0.35 | Carbide | 133195 | 000000 | 00000 |
| 0.079" | 0.685" | M1.7 | 0.35 | Carbide | 103006 | 000000 | 0000 |
| 0.079" | 1.2" | M1.7 | 0.35 | Carbide | 136290 | 000000 | 00000 |
Mitutoyo Dial Lever-Style Variance Indicators
Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included dovetail-to-stem attachment to convert the indicator to a stem mount.
Dial | Contact Point | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Measuring Increments | Accuracy | Mounting Stem Dia. | Number of Dovetail Mounts | Reading | Dia. | Head Dia. | Lg. | Mounting Thread Size | Swivel Angle | Manufacturer Model Number | Each | |
| 0mm-0.2mm | 0.01mm | ±0.003 mm | 5/16" | 3 | 0-100-0 | 1 9/16" | 0.079" | 0.6" | M1.7 | 190° | 513-405-10E | 000000 | 0000000 |
| 0mm-0.8mm | 0.01mm | ±0.008 mm | 5/16" | 3 | 0-40-0 | 1 9/16" | 0.079" | 0.69" | M1.7 | 190° | 513-404-10E | 000000 | 000000 |
| 0"-0.008" | 0.0001" | ±0.0001" | 3/8" | 3 | 0-4-0 | 1 9/16" | 0.079" | 0.61" | M1.7 | 190° | 513-403-10E | 000000 | 000000 |
| 0"-0.016" | 0.0001" | ±0.0002" | 5/32", 3/8" | 3 | 0-4-0 | 1 9/16" | 0.079" | 0.61" | M1.7 | 190° | 513-443-16A | 000000 | 000000 |
| 0"-0.03" | 0.0005" | ±0.0005" | 3/8" | 3 | 0-15-0 | 1 9/16" | 0.079" | 1.2" | M1.7 | 190° | 513-412-10E | 000000 | 000000 |
| 0"-0.06" | 0.0005" | ±0.0005" | 5/32", 3/8" | 3 | 0-15-0 | 1 9/16" | 0.079" | 0.65" | M1.7 | 190° | 513-442-16A | 000000 | 000000 |
| 0"-0.06" | 0.0005" | ±0.0005" | 5/32", 3/8" | 3 | 0-15-0 | 1 9/16" | 0.079" | 1.2" | M1.7 | 190° | 513-446-16A | 000000 | 000000 |
Mounting Thread | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Size | Pitch, mm | Material | Manufacturer Model Number | Each | |
| 0.079" | 0.441" | M1.7 | 0.35 | Carbide | 103010 | 000000 | 000000 |
| 0.079" | 0.453" | M1.7 | 0.35 | Carbide | 136075 | 000000 | 00000 |
| 0.079" | 0.61" | M1.7 | 0.35 | Carbide | 21CZB064 | 000000 | 0000 |
| 0.079" | 0.65" | M1.7 | 0.35 | Carbide | 133195 | 000000 | 00000 |
| 0.079" | 0.685" | M1.7 | 0.35 | Carbide | 103006 | 000000 | 0000 |
| 0.079" | 1.2" | M1.7 | 0.35 | Carbide | 136290 | 000000 | 00000 |