These mixers are CE marked, CSA certified, and CSA-US certified for use with food and beverages.

Turn the dial to adjust the speed of the propellers.

Bolt the flange onto a closed tank.

Motors are UL listed for use in environments with flammable gases and combustible dust.

Motors are UL listed for use in environments with flammable gases and combustible dust.

Thread these mixers into a drum opening for a secure connection.

The pipe-clamp connection allows you to quickly raise or lower these mixers to change containers.

Manually control and monitor mixing.

Attach to the rim of a batch can or small container.

Lightweight yet sturdy, these aluminum propellers are often used in light duty mixing applications.

Also known as hydrofoil propellers, these produce 40% more flow with less torque and energy than standard propellers.

Blades collapse to fit through 2" diameter and smaller openings, such as 55-gallon drums with a NPT opening size of 2.

For faster attachment than propellers with set screws, these propellers have threaded hubs that install on threaded shafts.

These shafts have one threaded end to fit threaded propellers and one machined end to fit mixer shaft couplings.

Cut through solid particles in your mixture.

Attach these clamps to a pipe and the knob allows you to raise or lower your mixer to quickly change containers.

Two knobs allow you to adjust the height of the mixer on the stand and the distance from the stand to the mixer.

Mount small-batch mixers above batch cans and small containers.

Propeller blades collapse to fit in drum openings with a NPT size of 2. They're polypropylene coated for chemical resistance.

A removable polyethylene liner with molded-in blades allows for easy cleaning. Stand is stationary.

Use for pH control and chlorination. These mixers are more chemical resistant than nylon mixers.

These mixers have unthreaded ends that can be secured with compression or push-to-connect fittings.

UL listed for environments with flammable fuels and solvents.

These shakers are lighter than dual-can shakers and do not require permanent mounting.

Blend liquids and create slurries. These blenders meet NSF/ANSI standards for use in food and beverage applications.

These paddles contain a compound that can be sensed by metal detectors.

Mix and stir food and other material in hygienic environments with these paddles—they’re easy to clean and won’t corrode from frequent washdowns with harsh cleaners.

These spatulas have flexible blades.

Use these spatulas when accidental sparks could be hazardous.

A rubber air diffuser provides uniform bubble distribution.

UL listed for use in environments with flammable gases and combustible dust.

A ball valve allows you to isolate the flow to minimize spillage. Outlet tubes can be removed for maintenance and cleaning without shutting down the line.

Made from PVC, these pumps are highly corrosion resistant and lightweight. Use them to produce emulsions, elevate water, and transport grains and other small particles.

Use plant steam to pump liquids and gases, prime pumps, and remove fumes.

Alter vibration speed in addition to force output.

Move this vibrator to the source of your flow problem.

Also known as turbine vibrators, these use half the air of other air-powered vibrators to generate the same force.

Also known as piston vibrators, these pound the sides of your bin to dislodge wet, sticky, and caked-on materials.

To dislodge extremely thick, sticky materials from the sides of your bin, these vibrators have a sturdy base for secure mounting and even force distribution.

Weld a bracket to each of your containers and move these vibrators from job to job.

When access to the inside of your tank is difficult, these vibrators can be installed and removed from outside of the bin for easier cleaning than bolt-on aerating vibrators.

Generating vibration with electromagnets, these have no mechanical parts that can wear out and shorten service life.

Adapt a standard caulk gun to dispense two-part adhesives from 1.69-oz. cartridges.

Keep cups and sticks on hand for mixing two-part adhesives.

These wire whisks make it easy to mix and whip wet and dry ingredients.

Stir sticks come packaged loose in a box.

Keep parts in constant motion for faster finishing than tumbling machines.

Coated with PTFE, these stirring bars are corrosion and chemical resistant.

Fish stirring bars out of containers using the magnetic end of these retrievers.