Filter by
Propeller Material
Shaft Material
Air Connection Pipe Size
Air Connection Thread Type
DFARS Compliance
About Selecting a Mixer
More
Flange-Mount Air-Powered Mixers for Tanks
Bolt the flange onto a closed tank. Also known as direct-drive mixers, these operate at high speeds for rapid tank turnover. Use them to mix liquids with a viscosity similar to water and light oils. Adjust mixing speed with the needle valve.
Mixers with one propeller have a left-hand propeller that moves clockwise when viewed from above for efficient mixing or counterclockwise for aeration.
Mixers with two propellers have one left-hand propeller and one right-hand propeller to move material in opposing directions for increased flow. Use them for thorough mixing in tanks that are deeper than they are wide and for faster mixing than single-propeller mixers.
Mixers
Mixer with Two Propellers
Mixer with One Propeller
Propellers | Shaft | Air Connection | Flange | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size  | Thread Type | Gender | Air Consumption | Dia. | Material | Bolt Circle Dia. | No. of Holes | Mount. Hole Dia. | O'all Ht. | Wt., lbs. | Each | |
For Thin Liquids | |||||||||||||||||||
| 1 | 300-1,750 | 2 | 6" | 316 Stainless Steel | 15" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 6" | Aluminum | 5" | 6 | 11/32" | 20 3/4" | 20 | 00000000 | 000000000 |
| 1 | 300-1,750 | 2 | 6" | 316 Stainless Steel | 27" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 6" | Aluminum | 5" | 6 | 11/32" | 32 3/4" | 25 | 00000000 | 00000000 |
| 1 | 300-1,750 | 2 | 6" | 316 Stainless Steel | 48" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 6" | Aluminum | 5" | 6 | 11/32" | 55 3/4" | 26 | 00000000 | 00000000 |
| 2 | 300-1,750 | 1 | 8" | 316 Stainless Steel | 27" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 7" | Aluminum | 6" | 6 | 1/2" | 34 7/16" | 34 | 00000000 | 00000000 |
| 2 | 300-1,750 | 1 | 8" | 316 Stainless Steel | 48" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 7" | Aluminum | 6" | 6 | 1/2" | 55 7/16" | 38 | 00000000 | 00000000 |
| 2 | 300-1,750 | 1 | 8" | 316 Stainless Steel | 60" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 7" | Aluminum | 6" | 6 | 1/2" | 67 7/16" | 41 | 00000000 | 00000000 |
| 3 | 300-1,750 | 1 | 10" | 316 Stainless Steel | 48" | 1" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 7" | Aluminum | 6" | 6 | 1/2" | 55 7/16" | 44 | 00000000 | 00000000 |
Repair Kit for 1 hp Mixers
| Includes | Each | |
| Body Gasket, Dead End Bearing, Drive End Bearing, Gasket End Cap, Push Pin, Shaft Seal, Vane, Vane Spring | 0000000 | 0000000 |