Slurry Mixers | McMaster-Carr

Choose a Category

Clear All

	Power Source Power Source

Liquid

	For Use With For Use With	Show

Slurry

	For Use With For Use With	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	Housing Material Housing Material

	Suction Pipe Size Suction Pipe Size

	Discharge Pipe Size Discharge Pipe Size

	Intake Pipe Size Intake Pipe Size

	Liquid Suction Flow Rate @ 5 ft. of Lift Liquid Suction Flow Rate @ 5 ft. of Lift

	Suction Gender Suction Gender

Male

Female

	Maximum Suction Lift Maximum Suction Lift

27 ft.

	Overall Width Overall Width

	Minimum Temperature Minimum Temperature

-150° F

-20° F

Not Rated

	Operating Pressure Operating Pressure

15-200 psi

80 psi

100 psi

	Liquid Suction Flow Rate @ 20 ft. of Lift Liquid Suction Flow Rate @ 20 ft. of Lift

	Discharge Connection Type Discharge Connection Type

Pipe

	Suction Connection Type Suction Connection Type

Pipe

	Discharge Gender Discharge Gender

Male

	Length Length

	Maximum Temperature Maximum Temperature

Less than 150° F

150° to 199° F

	Liquid Suction Flow Rate @ 10 ft. of Lift Liquid Suction Flow Rate @ 10 ft. of Lift

	Intake Gender Intake Gender

Male

Female

	Pump Type Pump Type

31 Products

Metal Liquid-Powered Jet Pumps

Powered by liquid, use these to pump a second liquid or to produce emulsions, elevate water, and transport grains and other small particles. When high-pressure liquid enters the intake, it creates suction that draws a second liquid into the pump body and discharges a pressurized blend of the two. The discharge pressure is greater than the suction flow but lower than the intake pressure. They have no moving parts or seals, eliminating downtime for lubrication and repairs. They're also known as eductors, ejectors, and injectors.

Note: Liquid suction flow rate is calculated using water at 100 psi with no feet of discharge head.

Bronze is more corrosion resistant than cast iron.

316 stainless steel pumps are the most corrosion-resistant metal option.

Liquid Suction Flow Rate, gpm						Suction		Intake		Discharge		Overall
@ 5 ft. of Lift	@ 10 ft. of Lift	@ 20 ft. of Lift	Max. Suction Lift, ft.	Operating Pressure, psi	Temp. Range, °F	Pipe Size	Thread Type	Pipe Size	Thread Type	Pipe Size	Thread Type	Lg.	Wd.		Each
For Use With Grain, Slurry, Water
Cast Iron
8	7	5	27	80	-20° to 150°	3/4	NPT	3/8	NPT	3/4	NPT	5 7/8"	1 1/4"	0000000	0000000
8	7	5	27	80	-20° to 150°	3/4	NPT	1/2	NPT	3/4	NPT	5 7/8"	1 1/4"	0000000	000000
14	12	9	27	80	-20° to 150°	1	NPT	1/2	NPT	1	NPT	7 1/8"	1 3/4"	0000000	000000
24	22	16	27	80	-20° to 150°	1 1/4	NPT	3/4	NPT	1 1/4	NPT	9"	2 3/8"	0000000	000000
40	36	27	27	80	-20° to 150°	1 1/2	NPT	1	NPT	1 1/2	NPT	11"	2 5/8"	0000000	000000
73	66	49	27	80	-20° to 150°	2	NPT	1 1/4	NPT	2	NPT	14 3/8"	3 1/2"	0000000	000000
127	114	86	27	80	-20° to 150°	2 1/2	NPT	1 1/2	NPT	2 1/2	NPT	18 1/8"	4 1/2"	0000000	000000
237	213	160	27	80	-20° to 150°	3	NPT	2	NPT	3	NPT	23 7/8"	6 1/8"	0000000	00000000
Bronze
8	7	5	27	15-200	-20° to 150°	3/4	NPT	3/8	NPT	3/4	NPT	5 7/8"	1 1/4"	0000000	000000
8	7	5	27	15-200	-20° to 150°	3/4	NPT	1/2	NPT	3/4	NPT	5 7/8"	1 1/4"	0000000	000000
14	12	9	27	15-200	-20° to 150°	1	NPT	1/2	NPT	1	NPT	7 1/8"	1 3/4"	0000000	000000
24	22	16	27	15-200	-20° to 150°	1 1/4	NPT	3/4	NPT	1 1/4	NPT	9"	2 3/8"	0000000	000000
40	36	27	27	15-200	-20° to 150°	1 1/2	NPT	1	NPT	1 1/2	NPT	11"	2 5/8"	0000000	000000
73	66	49	27	15-200	-20° to 150°	2	NPT	1 1/4	NPT	2	NPT	14 3/8"	3 1/2"	0000000	000000
127	114	86	27	15-200	-20° to 150°	2 1/2	NPT	1 1/2	NPT	2 1/2	NPT	18 1/8"	4 1/2"	0000000	00000000
237	213	160	27	15-200	-20° to 150°	3	NPT	2	NPT	3	NPT	23 7/8"	6 1/8"	0000000	00000000
316 Stainless Steel
8	7	5	27	15-200	-150° to 150°	3/4	NPT	3/8	NPT	3/4	NPT	5 7/8"	1 1/4"	0000000	000000
8	7	5	27	15-200	-150° to 150°	3/4	NPT	1/2	NPT	3/4	NPT	5 7/8"	1 1/4"	0000000	000000
14	12	9	27	15-200	-150° to 150°	1	NPT	1/2	NPT	1	NPT	7 1/8"	1 3/4"	0000000	000000
24	22	16	27	15-200	-150° to 150°	1 1/4	NPT	3/4	NPT	1 1/4	NPT	9"	2 3/8"	0000000	000000
40	36	27	27	15-200	-150° to 150°	1 1/2	NPT	1	NPT	1 1/2	NPT	11"	2 5/8"	0000000	000000
73	66	49	27	15-200	-150° to 150°	2	NPT	1 1/4	NPT	2	NPT	14 3/8"	3 1/2"	0000000	00000000
127	114	86	27	15-200	-150° to 150°	2 1/2	NPT	1 1/2	NPT	2 1/2	NPT	18 1/8"	4 1/2"	0000000	00000000
237	213	160	27	15-200	-150° to 150°	3	NPT	2	NPT	3	NPT	23 7/8"	6 1/8"	0000000	00000000

Chemical-Resistant Plastic Liquid-Powered Jet Pumps

Made from PVC, these pumps are highly corrosion resistant and lightweight. Use them to produce emulsions, elevate water, and transport grains and other small particles. When high-pressure liquid enters the intake, it creates suction that draws a second liquid or gas into the pump body and discharges a pressurized blend of the two. The discharge pressure is greater than the suction flow but lower than the intake pressure. They have no moving parts or seals, eliminating downtime for lubrication and repairs. They're also known as eductors, ejectors, and injectors.

Note: Liquid suction flow rate is calculated using water at 100 psi with no feet of discharge head.

Liquid Suction Flow Rate, gpm						Suction		Intake		Discharge		Overall
@ 5 ft. of Lift	@ 10 ft. of Lift	@ 20 ft. of Lift	Max. Suction Lift, ft.	Operating Pressure, psi	Max. Temp., °F	Pipe Size	Thread Type	Pipe Size	Thread Type	Pipe Size	Thread Type	Lg.	Wd.		Each
For Use With Grain, Slurry, Water
PVC Plastic
8	7	5	27	100	70°	3/4	NPT	1/2	NPT	3/4	NPT	5 3/4"	2"	0000000	0000000
14	12	9	27	100	70°	1	NPT	1/2	NPT	1	NPT	6 7/8"	2 1/2"	0000000	000000
24	22	16	27	100	70°	1 1/4	NPT	3/4	NPT	1 1/4	NPT	9 1/8"	3"	0000000	000000
40	36	27	27	100	70°	1 1/2	NPT	1	NPT	1 1/2	NPT	11"	3 1/2"	0000000	000000
73	66	49	27	100	70°	2	NPT	1 1/4	NPT	2	NPT	14 1/4"	4"	0000000	000000
127	114	86	27	100	70°	2 1/2	NPT	1 1/2	NPT	2 1/2	NPT	18 1/2"	5"	0000000	00000000
237	213	160	27	100	70°	3	NPT	2	NPT	3	NPT	24 1/4"	6"	0000000	00000000

Terms and Conditions and Privacy Policy