Filter by
Inlet Pipe Size
DFARS Compliance
Inlet Thread Type
Aluminum Proportional Mixers for Coolant and Soluble Oil
Use this mixer to dilute coolants and soluble oils with water. It dispenses solution directly from your drum in a measured ratio. Attach your water line to the inlet and set your desired mixing ratio with the regulator knob. The water line connection has a quarter-turn shutoff valve.
Inlet | Outlet | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mixing Ratio | For Container Cap., gal. | For Drum Opening Size | Flow Rate, gpm | Pipe Size  | Thread Type | Gender | Min. Pressure, psi | For Tube ID | Tube Connection Type | Max. Pressure | Max. Temp., °F | Each | |
| 8:1 to 100:1 | 5-55 | 2 NPS | 4 | 1/2 | NPT | Female | 15 | 1/2" | Push to Connect | 57 psi @ 70° F | 140° | 000000 | 0000000 |
Bronze Proportional Mixers for Coolant and Soluble Oil
Use these mixers to dilute coolants and soluble oils with water. They dispense solution directly from your drum in a measured ratio. Attach your water line to the inlet and set your desired mixing ratio with the needle valve. The water line connection has a quarter-turn shutoff valve.
Inlet | Outlet | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mixing Ratio | For Container Cap., gal. | For Drum Opening Size | Flow Rate, gpm | Pipe Size | Thread Type | Gender | Min. Pressure, psi | Pipe Size | Thread Type | Gender | Max. Pressure | Max. Temp., °F | Each | |
| 15:1 to 45:1 | 5-55 | 2 NPT | 3 | 3/8 | NPT | Female | 25 | 1/2 | NPT | Male | 75 psi @ 70° F | 150° | 000000 | 0000000 |
| 4:1 to 35:1 | 5-55 | 2 NPT | 3 | 3/8 | NPT | Female | 25 | 1/2 | NPT | Male | 75 psi @ 70° F | 150° | 000000 | 000000 |