Wet Materials Mixers | McMaster-Carr

Filter by

Mount Type

Power Source

Trough Material

Body Material

Material

Trough Length

Voltage

Trough Width

Vibrator Type

Duty Cycle

3 Minutes On, 3 Minutes Off

Height

Throughput

Force @ Pressure

DFARS Specialty Metals

Exempt

Mounting Hole Center-to-Center

Wall Thickness

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

RoHS

Export Control Classification Number (ECCN)

Maximum Temperature

Air Connection Pipe Size

Number of Mounting Holes

Piston Type

Force

71 Products

Vibrating Feeders

No need to worry about finding a compatible trough for your vibrator—these feeders come ready to use. With no mechanical parts to wear out or lubricate, downtime is rare. These feeders use electromagnets to shake material down the trough, making them ideal for moving substances that could cake or stick. For example, they’re often used to transfer powders into mixing tanks and add binders to foundry sand for metal casting. Compared to most vibrators, these feeders are quiet, too. At around 50 dBA, they generate about the same amount of noise as normal conversation.

Steel Trough—More durable than 304 stainless steel troughs to handle abrasive materials without denting. They are best for moving dry substances, however, since moisture will cause them to rust.

304 Stainless Steel Trough—Resist corrosion better than steel troughs to transfer chemicals and damp material.

Required Vibrator Controllers—Adjust throughput from a steady stream to a trickle. If you want to synchronize multiple feeders to run at the same speed, you can connect them to the same controller as long as the total current draw is less than 5 amps. With a durable polycarbonate housing, these controllers won’t dent or crack from occasional bumps. They’re also rated NEMA 4X for protection from dust, dirt, and washdowns.

Vibrating Feeders													Required Vibrator Controllers
		Trough Size							Steel Trough		304 Stainless Steel Trough
Throughput, lb/hr	Volume (Sound), dBA	Lg.	Wd.	Dp.	Voltage, V AC	Current, amp	Wire Connection	Ht.		Each		Each		Each
1,250	52	12"	1 1/2"	2"	120	0.35	Wire Leads	6 3/8"	58815K12	000000000	58815K11	000000000	5876K88	0000000
4,000	52	18"	3"	2 3/4"	120	0.9	Wire Leads	8 5/8"	58815K14	00000000	58815K13	00000000	5876K88	000000
8,000	52	20"	5"	3"	120	2	Wire Leads	9"	58815K16	00000000	58815K15	00000000	5876K88	000000
10,000	52	24"	6"	3"	120	2.3	Wire Leads	9 11/16"	58815K18	00000000	58815K17	00000000	5876K88	000000

Air-Powered Vibrators for Wet Materials


Style 1	Style 2	Style 3	Style 4

Style 5	Style 6	Style 7

Also known as piston vibrators, these pound the sides of your bin to dislodge wet, sticky, and caked-on materials. Bin wall thickness determines the force required to move the material in the bin. To select a vibrator strong enough for your application, find your bin's wall thickness in the table.

Side Mount with Top Inlet Tube Connection

Style 1

Standard Piston—Vibrators with standard pistons make direct contact with your container wall for maximum impact.

					Inlet Air Connection		Outlet Air Conection				Mounting Holes		Overall
	Style	For Wall Thk.	Force @ Pressure	Vibration Freq. @ Pressure	For Tube OD	Type	Thread Size	Thread Type	Air Consumption @ Pressure	Volume @ Pressure	No. of	Dia.	Wd.	Ht.	Dp.	Piston Type		Each
304 Stainless Steel Body



		1	3/32"	15 lbf @ 80 psi	16,000 vpm @ 80 psi	1/4"	Push to Connect	10-32	UNF	2 ft³/min @ 80 psi	95 dBA @ 80 psi	1	3/16"	2 3/16"	1 1/4"	5/8"	Standard	5804K25	0000000


		Steel Body



				1	3/32"	21 lbf @ 80 psi	11,400 vpm @ 80 psi	1/4"	Push to Connect	10-32	UNF	2.1 ft³/min @ 80 psi	95 dBA @ 80 psi	1	1/4"	2 7/8"	1 1/4"	5/8"	Standard	5804K26	000000

Side Mount with Top Inlet Pipe Connection


Style 2	Style 3

Standard Piston—Vibrators with standard pistons make direct contact with your container wall for maximum impact.

Cushion-Impact Piston—Vibrators with cushion-impact pistons have an air cushion that prevents metal-to-metal contact.

					Inlet Air Connection			Outlet Air Conection				Mounting Holes		Overall
	Style	For Wall Thk.	Force @ Pressure	Vibration Freq. @ Pressure	Pipe Size	Type	Thread Type	Pipe Size	Thread Type	Air Consumption @ Pressure	Volume @ Pressure	No. of	Dia.	Wd.	Ht.	Dp.	Piston Type		Each
Steel Body



		2	1/8"	235 lbf @ 80 psi	17,400 vpm @ 80 psi	1/8	Threaded	NPT	1/8	NPT	4.5 ft³/min @ 80 psi	107 dBA @ 80 psi	1	5/16"	5 3/16"	1 7/16"	1"	Standard	5799K12	0000000


		2	1/8"	267 lbf @ 80 psi	14,700 vpm @ 80 psi	1/4	Threaded	NPT	1/4	NPT	4.5 ft³/min @ 80 psi	106 dBA @ 80 psi	1	3/8"	5 3/8"	1 9/16"	1 1/8"	Standard	5799K13	000000
		2	1/8"	292 lbf @ 80 psi	14,000 vpm @ 80 psi	1/4	Threaded	NPT	1/4	NPT	4.5 ft³/min @ 80 psi	106 dBA @ 80 psi	1	3/8"	5 3/8"	1 3/4"	1 5/16"	Standard	5799K14	000000
		2	1/8"	405 lbf @ 80 psi	12,200 vpm @ 80 psi	1/4	Threaded	NPT	1/4	NPT	4.5 ft³/min @ 80 psi	105 dBA @ 80 psi	1	1/2"	5 5/16"	2 1/16"	1 5/8"	Standard	5799K16	000000
		2	1/8"	586 lbf @ 80 psi	8,600 vpm @ 80 psi	1/4	Threaded	NPT	1/4	NPT	7 ft³/min @ 80 psi	105 dBA @ 80 psi	1	1/2"	7 5/8"	2 3/4"	1 7/8"	Standard	5799K17	000000
		3	3/32"	113 lbf @ 80 psi	3,900 vpm @ 80 psi	1/4	Threaded	NPT	1/4	NPT	3.7 ft³/min @ 80 psi	78 dBA @ 80 psi	1	1/2"	5 7/8"	2 3/4"	1 1/2"	Cushion Impact	5884K13	000000
		3	3/32"	147 lbf @ 80 psi	3,200 vpm @ 80 psi	1/4	Threaded	NPT	1/4	NPT	7 ft³/min @ 80 psi	81 dBA @ 80 psi	1	1/2"	7 3/4"	2 5/8"	2"	Cushion Impact	5884K14	000000

Side Mount with Side Inlet Pipe Connection

Style 4

Cushion-Impact Piston—Vibrators with cushion-impact pistons have an air cushion that prevents metal-to-metal contact.

					Inlet Air Connection			Outlet Air Conection				Mounting Holes		Overall
	Style	For Wall Thk.	Force @ Pressure	Vibration Freq. @ Pressure	Pipe Size	Type	Thread Type	Pipe Size	Thread Type	Air Consumption @ Pressure	Volume @ Pressure	No. of	Dia.	Wd.	Ht.	Dp.	Piston Type		Each
Steel Body



		4	3/32"	38 lbf @ 80 psi	3,550 vpm @ 80 psi	1/4	Threaded	NPT	1/4	NPT	2.8 ft³/min @ 80 psi	69 dBA @ 80 psi	1	3/8"	5 3/4"	1 15/16"	1 3/16"	Cushion Impact	5884K12	0000000

End Mount with Top Inlet Pipe Connection

Style 5

Standard Piston—Vibrators with standard pistons make direct contact with your container wall for maximum impact.

					Inlet Air Connection			Outlet Air Conection				Mounting Holes		Overall
	Style	For Wall Thk.	Force @ Pressure	Vibration Freq. @ Pressure	Pipe Size	Type	Thread Type	Pipe Size	Thread Type	Air Consumption @ Pressure	Volume @ Pressure	No. of	Dia., mm	Wd.	Ht.	Piston Type		Each
Aluminum Body



		5	1/32"	17 lbf @ 80 psi	6,500 vpm @ 80 psi	1/8	Threaded	BSPP	1/8	BSPP	0.5 ft³/min @ 80 psi	59 dBA @ 80 psi	1	8	3 3/16"	1 1/4"	Standard	58765K57	0000000


		5	1/16"	38 lbf @ 80 psi	5,600 vpm @ 80 psi	1/8	Threaded	BSPP	1/8	BSPP	1.6 ft³/min @ 80 psi	64 dBA @ 80 psi	1	10	3 11/16"	1 9/16"	Standard	58765K58	000000
		5	1/8"	105 lbf @ 80 psi	4,100 vpm @ 80 psi	1/8	Threaded	BSPP	1/4	BSPP	2.7 ft³/min @ 80 psi	72 dBA @ 80 psi	1	12	4 9/16"	1 7/8"	Standard	58765K59	000000
		5	3/16"	220 lbf @ 80 psi	4,400 vpm @ 80 psi	1/4	Threaded	BSPP	1/4	BSPP	4.5 ft³/min @ 80 psi	74 dBA @ 80 psi	1	12	4 9/16"	2 1/4"	Standard	58765K61	000000

Bottom Mount with Top Inlet Pipe Connection

Style 6

Standard Piston—Vibrators with standard pistons make direct contact with your container wall for maximum impact.

					Inlet Air Connection					Mounting Holes			Overall
	Style	For Wall Thk.	Force @ Pressure	Vibration Freq. @ Pressure	Pipe Size	Type	Thread Type	Air Consumption @ Pressure	Volume @ Pressure	No. of	Screw Size	Ctr.-to-Ctr.	Wd.	Ht.	Dp.	Piston Type		Each
Steel Body



		6	1/8"	438 lbf @ 80 psi	11,500 vpm @ 80 psi	1/8	Threaded	NPT	6.8 ft³/min @ 80 psi	97 dB @ 80 psi	2	1/2"	2 7/8"	4 11/16"	2"	3"	Standard	5798K2	0000000


		6	3/16"	403 lbf @ 80 psi	6,500 vpm @ 80 psi	1/4	Threaded	NPT	14.4 ft³/min @ 80 psi	99 dB @ 80 psi	2	1/2"	3 3/4"	8"	2 1/4"	3 13/16"	Standard	5798K3	000000
		6	1/4"	758 lbf @ 80 psi	4,100 vpm @ 80 psi	1/4	Threaded	NPT	10.9 ft³/min @ 80 psi	102 dB @ 80 psi	2	5/8"	4"	8"	2 3/4"	3 1/8"	Standard	5798K4	000000

Base Mount with Side Inlet Pipe Connection

Style 7

Standard Piston—Vibrators with standard pistons make direct contact with your container wall for maximum impact.

Cushion-Impact Piston—Vibrators with cushion-impact pistons have an air cushion that prevents metal-to-metal contact.

					Inlet Air Connection					Mounting Holes			Overall
	Style	For Wall Thk.	Force @ Pressure	Vibration Freq. @ Pressure	Pipe Size	Type	Thread Type	Air Consumption @ Pressure	Volume @ Pressure	No. of	Dia.	Ctr.-to-Ctr.	Wd.	Ht.	Dp.	Piston Type		Each
Steel Body



		7	1/8"	120 lbf @ 80 psi	6,500 vpm @ 80 psi	1/4	Threaded	NPT	5 ft³/min @ 80 psi	82 dBA @ 80 psi	2	1/2"	3 1/2"	4 1/2"	3 7/8"	2"	Cushion Impact	1153N1	0000000


		7	1/8"	170 lbf @ 80 psi	4,200 vpm @ 80 psi	1/4	Threaded	NPT	9 ft³/min @ 80 psi	83 dBA @ 80 psi	2	1/2"	4 1/2"	6"	5 5/8"	2 1/2"	Cushion Impact	1153N2	000000
		7	1/8"	242 lbf @ 80 psi	11,000 vpm @ 80 psi	1/4	Threaded	NPT	5 ft³/min @ 80 psi	92 dBA @ 80 psi	2	1/2"	3 1/2"	4 1/2"	3 7/8"	2"	Standard	1154N1	000000
		7	1/8"	325 lbf @ 80 psi	7,000 vpm @ 80 psi	1/4	Threaded	NPT	9 ft³/min @ 80 psi	93 dBA @ 80 psi	2	1/2"	4 1/2"	6"	5 5/8"	2 1/2"	Standard	1154N2	000000
		7	1/4"	310 lbf @ 80 psi	3,000 vpm @ 80 psi	1/4	Threaded	NPT	15 ft³/min @ 80 psi	85 dBA @ 80 psi	2	5/8"	7 1/2"	9"	7 1/4"	3 13/16"	Cushion Impact	1153N3	000000
		7	1/4"	610 lbf @ 80 psi	5,000 vpm @ 80 psi	1/4	Threaded	NPT	15 ft³/min @ 80 psi	98 dBA @ 80 psi	2	5/8"	7 1/2"	9"	7 1/4"	3 13/16"	Standard	1154N3	000000

Electric Vibrators for Wet Materials


Style 2	Style 3	Style 4

Style 5	Style 1

Since they generate vibration with electromagnets, these vibrators have no moving parts that can wear out and shorten service life. They pound on container walls to dislodge sticky, caked-on materials. Vibrators require a controller (sold separately). Bin wall thickness determines the force required to move the material in the bin. To select a vibrator strong enough for your application, find your bin's wall thickness in the table.

Style 4—Style 4 have an internal cushion for reduced noise. They are water resistant for use in environments with splashing water.

Style 5—Style 5 make direct contact with the container wall for maximum impact. They are water resistant for use in environments with splashing water.

									Mounting Holes			Overall
	Style	For Wall Thk.	Force, lbf	Vibration Freq., vpm	Cable Lg., ft.	Current, amp	Freq., Hz	Volume (Sound), dBA	No. of	Dia.	Ctr.-to-Ctr.	Wd.	Ht.	Dp.		Each
120V AC Single-Phase—Wire Leads







				Steel Body

				1	1/32"	12	3,600; 7,200	10	0.3	60	58	1	13/32"	—	4 3/16"	3 1/16"	2 7/8"	5876K31	0000000




						Aluminum Body

						2	1/32"	47	3,600	10	0.9	60	64	1	17/32"	—	7 1/4"	4 1/4"	3"	5876K33	000000


						2	1/32"	47	7,200	10	0.9	60	64	1	17/32"	—	7 1/4"	4 1/4"	3"	5876K34	000000
						3	1/32"	130	3,600	10	1.2	60	41	2	7/16"	9 1/4"	10 1/4"	4 1/16"	4 1/4"	5876K35	00000000
						3	1/16"	245	3,600	10	2	60	57	2	7/16"	9 1/4"	10 1/4"	4 5/16"	5 1/8"	5876K36	00000000
						4	1/8"	525	3,600	10	3.5	60	68	2	17/32"	8 1/4"	9 3/8"	6 1/2"	7 3/8"	5876K37	00000000
						4	1/8"	1,090	3,600	10	4.5	60	70	2	11/16"	9 1/4"	10 3/4"	7 1/4"	9 3/4"	5876K38	00000000
						5	1/4"	1,270	3,600	10	4.5	60	95	2	11/16"	9 1/4"	10 3/4"	7 1/4"	9 3/4"	5876K39	00000000


						240V AC Single-Phase—Wire Leads







										Aluminum Body

										1	1/32"	12	3,600	10	0.18	60	58	1	13/32"	—	4 3/16"	3 1/16"	2 7/8"	5876K51	000000

Controllers

Controllers have an adjustable speed dial. Controllers for 3,600 VPM vibrators are rated NEMA 4 for protection against washdowns, corrosion, and dust. Choose by matching the vibrator's voltage, vibration speed, and current to the controller.

	Enclosure Rating		Each
For 120V AC—3,600 vpm



	0.3, 0.9, 1.2, 2, 3.5, 4.5	NEMA 4X	5876K88	0000000


	For 120V AC—7,200 vpm



			0.3, 0.9	—	5876K81	000000


			For 240V AC—3,600 vpm



					0.2	NEMA 4X	5876K87	000000

Vacuum-Mount Air-Powered Vibrators for Wet Materials

These vibrators attach more quickly than other vibrators by generating a vacuum instead of bolting or welding, so you can place them at the source of the blockage and quickly move them between bins. They're often used to dislodge sticky, caked-on materials from trailers, railcars, and hoppers. Bin wall thickness determines the force required to move the material in the bin. To select a vibrator strong enough for your application, find your bin's wall thickness in the table.

				Inlet Air Connection			Outlet Air Conection						Overall
	For Wall Thk.	Force @ Pressure	Vibration Freq. @ Pressure	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Air Consumption @ Pressure	Volume @ Pressure	Wt., lb.	Wd.	Ht.	Dp.		Each
Standard Piston







				Iron Body

				1/8"	260 lbf @ 80 psi	5,300 vpm @ 80 psi	1/4	NPT	Female	1/4	NPT	Female	8 ft³/min @ 80 psi	86 dBA @ 80 psi	10	11 5/8"	6 3/4"	4 3/8"	1136N11	000000000


				3/16"	490 lbf @ 80 psi	2,900 vpm @ 80 psi	1/4	NPT	Female	1/4	NPT	Female	17.5 ft³/min @ 80 psi	90 dBA @ 80 psi	10	19 5/16"	8 9/16"	6 3/8"	1136N12	00000000

Bracket-Mount Air-Powered Vibrators for Wet Materials


For 1/8" Wall Thk.	For 1/4" Wall Thk.	For 3/8" Wall Thk.

Weld a bracket to each of your containers and move these vibrators from job to job. They're commonly used to dislodge sticky, caked-on materials from container walls. Bin wall thickness determines the force required to move the material in the bin. To select a vibrator strong enough for your application, find your bin's wall thickness in the table.

	Vibrators																	Brackets
				Inlet Air Connection			Outlet Air Conection						Overall
	For Wall Thk.	Force @ Pressure	Vibration Freq. @ Pressure	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Air Consumption @ Pressure	Volume @ Pressure	Wt., lb.	Wd.	Ht.	Dp.		Each		Each
Standard Piston







				Iron Body

				1/8"	326 lbf @ 80 psi	5,900 vpm @ 80 psi	1/4	NPT	Female	1/4	NPT	Female	7 ft³/min @ 80 psi	95 dBA @ 80 psi	8	7 1/16"	5"	3"	5728K21	0000000	5728K33	000000


				1/4"	610 lbf @ 80 psi	3,300 vpm @ 80 psi	1/4	NPT	Female	1/4	NPT	Female	15.8 ft³/min @ 80 psi	99 dBA @ 80 psi	33	10 1/4"	7 1/2"	5 1/2"	5875K14	000000	5875K24	000000
				3/8"	1,917 lbf @ 80 psi	3,000 vpm @ 80 psi	3/8	NPT	Female	3/8	NPT	Female	21 ft³/min @ 80 psi	102 dBA @ 80 psi	76	13 9/16"	11 1/2"	6"	5875K16	00000000	5875K27	000000
				3/8"	2,422 lbf @ 80 psi	2,600 vpm @ 80 psi	1/2	NPT	Female	1/2	NPT	Female	33 ft³/min @ 80 psi	104 dBA @ 80 psi	93	15 1/4"	11 1/2"	6"	5875K17	00000000	5875K27	000000

Heavy Duty Air-Powered Vibrators for Wet Materials with Setup Kit

These vibrators come with everything you need to get started. Use them to dislodge extremely thick, sticky materials from the sides of your bin. Vibrators have a sturdy base for secure mounting and even force distribution. Bin wall thickness determines the force required to move the material in the bin. To select a vibrator strong enough for your application, find your bin's wall thickness in the table.

Kits include a U-channel bracket, a manual air valve, an automatic filter/regulator/lubricator, and two hoses with fittings. Some come with an extra replacement hose.

Standard Piston—Vibrators with standard pistons make direct contact with your container wall for maximum impact.

Cushion-Impact Piston—Vibrators with cushion-impact pistons have an air cushion that prevents metal-to-metal contact.

				Inlet Air Connection			Outlet Air Conection					Mounting Holes			Overall
	For Wall Thk.	Force @ Pressure	Vibration Freq. @ Pressure	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Air Consumption @ Pressure	Volume @ Pressure	No. of	Dia.	Ctr.-to-Ctr.	Wd.	Ht.	Dp.		Each
Standard Piston







				Iron Body

				1/8"	326 lbf @ 80 psi	5,900 vpm @ 80 psi	1/4	NPT	Female	1/4	NPT	Female	7 ft³/min @ 80 psi	95 dBA @ 80 psi	4	3/8"	2"	3"	4 11/16"	3"	5800K21	0000000


				3/16"	601 lbf @ 80 psi	4,600 vpm @ 80 psi	1/4	NPT	Female	3/8	NPT	Female	12 ft³/min @ 80 psi	99 dBA @ 80 psi	4	5/8"	3"	4 3/8"	6 3/8"	4 3/8"	5800K32	000000
				1/4"	610 lbf @ 80 psi	3,300 vpm @ 80 psi	1/4	NPT	Female	3/8	NPT	Female	15 ft³/min @ 80 psi	99 dBA @ 80 psi	4	5/8"	3"	4 3/8"	6 3/4"	4 3/8"	5800K33	000000
				3/8"	1,917 lbf @ 80 psi	3,000 vpm @ 80 psi	3/8	NPT	Female	1/2	NPT	Female	21 ft³/min @ 80 psi	102 dBA @ 80 psi	4	3/4"	4 1/8"	5 3/4"	8 7/16"	5 3/4"	5800K34	00000000
				3/8"	2,422 lbf @ 80 psi	2,600 vpm @ 80 psi	1/2	NPT	Female	1/2	NPT	Female	33 ft³/min @ 80 psi	104 dBA @ 80 psi	4	3/4"	4 1/8"	5 3/4"	9 13/16"	5 3/4"	5800K35	00000000


				Cushion-Impact Piston







								Iron Body

								1/8"	260 lbf @ 80 psi	5,300 vpm @ 80 psi	1/4	NPT	Female	1/4	NPT	Female	7 ft³/min @ 80 psi	86 dBA @ 80 psi	4	3/8"	2"	3"	4 11/16"	3"	5800K12	000000


								1/8"	480 lbf @ 80 psi	4,100 vpm @ 80 psi	1/4	NPT	Female	3/8	NPT	Female	12 ft³/min @ 80 psi	90 dBA @ 80 psi	4	5/8"	3"	4 3/8"	6 3/8"	4 3/8"	5800K13	000000
								3/16"	490 lbf @ 80 psi	2,900 vpm @ 80 psi	1/4	NPT	Female	3/8	NPT	Female	16 ft³/min @ 80 psi	90 dBA @ 80 psi	4	5/8"	3"	4 3/8"	6 3/4"	4 3/8"	5800K4	000000
								1/4"	939 lbf @ 80 psi	2,100 vpm @ 80 psi	3/8	NPT	Female	1/2	NPT	Female	21 ft³/min @ 80 psi	92 dBA @ 80 psi	4	3/4"	4 1/8"	5 3/4"	8 7/16"	5 3/4"	5800K15	00000000

Heavy Duty Air-Powered Vibrators for Wet Materials

To dislodge extremely thick, sticky materials from the sides of your bin, these vibrators have a sturdy base for secure mounting and even force distribution. Bin wall thickness determines the force required to move the material in the bin. To select a vibrator strong enough for your application, find your bin's wall thickness in the table.

Standard Piston—Vibrators with standard pistons make direct contact with your container wall for maximum impact.

Cushion-Impact Piston—Vibrators with cushion-impact pistons have an air cushion that prevents metal-to-metal contact.

				Inlet Air Connection			Outlet Air Conection					Mounting Holes			Overall
	For Wall Thk.	Force @ Pressure	Vibration Freq. @ Pressure	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Air Consumption @ Pressure	Volume @ Pressure	No. of	Dia.	Ctr.-to-Ctr.	Wd.	Ht.	Dp.		Each
Standard Piston







				Iron Body

				1/8"	326 lbf @ 80 psi	5,900 vpm @ 80 psi	1/4	NPT	Female	1/4	NPT	Female	7 ft³/min @ 80 psi	95 dBA @ 80 psi	4	3/8"	2"	3"	4 11/16"	3"	5800K81	0000000


				3/16"	601 lbf @ 80 psi	4,600 vpm @ 80 psi	1/4	NPT	Female	3/8	NPT	Female	12 ft³/min @ 80 psi	99 dBA @ 80 psi	4	5/8"	3"	4 3/8"	6 3/8"	4 3/8"	5800K82	000000
				1/4"	610 lbf @ 80 psi	3,300 vpm @ 80 psi	1/4	NPT	Female	3/8	NPT	Female	15 ft³/min @ 80 psi	99 dBA @ 80 psi	4	5/8"	3"	4 3/8"	6 3/4"	4 3/8"	5800K83	000000
				3/8"	1,917 lbf @ 80 psi	3,000 vpm @ 80 psi	3/8	NPT	Female	1/2	NPT	Female	21 ft³/min @ 80 psi	102 dBA @ 80 psi	4	3/4"	4 1/8"	5 3/4"	8 7/16"	5 3/4"	5800K84	000000
				3/8"	2,422 lbf @ 80 psi	2,600 vpm @ 80 psi	1/2	NPT	Female	1/2	NPT	Female	33 ft³/min @ 80 psi	104 dBA @ 80 psi	4	3/4"	4 1/8"	5 3/4"	9 13/16"	5 3/4"	5800K86	000000


				Cushion-Impact Piston







								Iron Body

								1/8"	260 lbf @ 80 psi	5,300 vpm @ 80 psi	1/4	NPT	Female	1/4	NPT	Female	7 ft³/min @ 80 psi	86 dBA @ 80 psi	4	3/8"	2"	3"	4 11/16"	3"	5800K72	000000


								1/8"	480 lbf @ 80 psi	4,100 vpm @ 80 psi	1/4	NPT	Female	3/8	NPT	Female	12 ft³/min @ 80 psi	90 dBA @ 80 psi	4	5/8"	3"	4 3/8"	6 3/8"	4 3/8"	5800K73	000000
								3/16"	490 lbf @ 80 psi	2,900 vpm @ 80 psi	1/4	NPT	Female	3/8	NPT	Female	16 ft³/min @ 80 psi	90 dBA @ 80 psi	4	5/8"	3"	4 3/8"	6 3/4"	4 3/8"	5800K74	000000
								1/4"	939 lbf @ 80 psi	2,100 vpm @ 80 psi	3/8	NPT	Female	1/2	NPT	Female	21 ft³/min @ 80 psi	92 dBA @ 80 psi	4	3/4"	4 1/8"	5 3/4"	8 7/16"	5 3/4"	5800K75	000000
								3/8"	1,350 lbf @ 80 psi	1,810 vpm @ 80 psi	1/2	NPT	Female	1/2	NPT	Female	32 ft³/min @ 80 psi	94 dBA @ 80 psi	4	3/4"	4 1/8"	5 3/4"	9 13/16"	5 3/4"	5800K76	000000