These flexible needles can be cut to length.

The needles in these sets connect to adhesive cartridges, grease guns, and other dispensers with threaded connections.

Dispense fluid from syringes and other small instruments with luer lock connections.

Trim the opening size to the diameter you need.

Designed for dispensing tiny quantities, these glass syringes are often used in gas chromatography applications. Attach a needle with a luer lock connection to dispense contents.

Use these components to create an air-powered dispensing system. A foot pedal controls the amount released.

The ergonomic design helps reduce fatigue when dispensing one-part adhesives, sealants, and fluids.

Identify contents at a glance with these sets of 25 bottles in five lid colors.

Also known as wash bottles, these dispense liquid at a downward angle.

Labels allow identification at a glance.

Long nozzles allow dispensing in hard-to-reach places.

Choose a needle-tip squeeze bottle for your most precise dispensing applications.

Add a needle with a luer lock connection and squeeze to dispense a single drop or a stream of liquid.

A ball valve allows you to isolate the flow to minimize spillage. Outlet tubes can be removed for maintenance and cleaning without shutting down the line.

Powered by liquid, use these to pump a second liquid or to produce emulsions, elevate water, and transport grains and other small particles.

Automatically control output from a distance using 4‐20 mA or external-pulse signals. These pumps meter a consistent amount of liquid within ±2% of the maximum flow.

A 316 stainless steel housing provides corrosion resistance for a long life in harsh environments. These pumps meter a consistent amount of liquid within ±2% of the maximum flow.

Also known as peristaltic pumps and tubing pumps, these maintain a fixed flow rate.

These pumps can be used with pressures four times higher than standard pumps for chemicals.

With a footprint that's only a few inches in any direction, these pumps fit into compact systems to dispense small amounts of acids, cleaning fluids, and other chemicals. They're often used in sterilization, photochemical, and water treatment systems.

For high-volume chemical sampling and draining, these pumps have a powerful motor that enables them to move 2,448 gallons of liquid per day.

Rated for liquids with a viscosity up to 10,000 centipoise, these pumps can be used with very thick chemicals such as electropolishing solutions.

Pick up chemical spills and remove liquids in vacuum filtering systems—these pumps create suction to draw up liquids and gases as water flows through them.

Mount these pumps in any position, even upside down. Pumps have a subfractional horsepower motor rated for intermittent use. Also known as diaphragm pumps, use them for low-flow spraying, draining, and washdown applications.

Protect sensitive parts, such as motor and bearing seals, from damage by monitoring the pressure of the grease you’re dispensing.

Ensure that only food-grade grease is used in controlled areas—this gun only works with compatible food-grade grease cartridges.

Start greasing faster than standard grease guns and continue with the high output of a lever grip.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Turn a small tube of grease into a dispenser.

Prime these guns faster than standard grease guns and use them with just one hand.

Because of their one-hand operation, pistol-grip grease guns are easier to use for adding grease to hard-to-reach places than lever-grip guns.

This gun comes filled with 2 oz. of lithium-thickened grease.

More portable than air-powered options, these guns operate on a rechargeable battery.

Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.

These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.

These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Dispense from grease guns into grease fittings and bare lubrication points.

Convert dispensing tips with male threads into quick-disconnect couplings.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

Fill these cartridges with one-part adhesive.

Thread these holders onto a gun to hold an adhesive cartridge.

Similar to a caulk gun, these guns are good for small jobs.

Only for use with 3M dual cartridges, these guns dispense two-part adhesives.

Use these guns to dispense two-part adhesives. Do not use them with 3M dual cartridges.

Fill these cartridges with the two-part adhesive of your choice.

Use these plungers with a dispensing gun for adhesives in dual cartridges.

Swap out worn or broken parts for your 3M hot-melt glue gun.

Dispense 3M hot-melt adhesives with these guns.

Melt and dispense hot-melt glue sticks for sealing and assembling.

Use these guns in heat-sensitive applications and on delicate materials. They have a temperature setting of 250° F.

Dispense up to 3 times as much adhesive per hour as our standard hot-melt glue guns.

Adjust air-flow for precise control and smooth material flow—these guns have a built-in pressure regulator with a control knob.

Unlike standard caulk guns, these guns measure just 4" long and don’t have a cartridge rod, so you can use them in snug spaces and around tight corners.

Dispense sealants from cartridges with ease and control.

Achieve the perfect bead every time.

Dispense sealants packaged in sausage packs.

Immerse the nozzle in the sealant and pull back the rod to fill.