Power Source Power Source | Show |
---|
|
Housing Material Housing Material |
---|
|
Intake Gender Intake Gender |
---|
|
Liquid Suction Flow Rate @ 5 ft. of Lift Liquid Suction FlowRate @ 5 ft. of Lift |
---|
|
|
Suction Gender Suction Gender |
---|
|
Liquid Suction Flow Rate @ 10 ft. of Lift Liquid Suction FlowRate @ 10 ft. of Lift |
---|
|
|
Maximum Suction Lift Maximum Suction Lift |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Use plant steam to pump liquids and gases, prime pumps, and remove fumes. When high-pressure steam enters the intake, it creates suction that draws a second liquid or gas into the pump body and discharges a pressurized blend of the two. The discharge pressure is greater than the suction flow but lower than the intake pressure. Gas suction flow is calculated using steam at atmospheric pressure. They have no moving parts or seals, eliminating downtime for lubrication and repairs. They're also known as eductors, ejectors, and injectors.
Note: Liquid suction flow rate is calculated using 80 psi steam at 0-40 feet of discharge head.
316 stainless steel pumps provide the most corrosion resistance.
Liquid Suction Flow Rate, gpm | Gas Suction Flow, cfm | Intake Pressure, psi | Suction | Intake | Discharge | Overall | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 5 ft. of Lift | 10 ft. of Lift | @ 20 ft. of Lift | @ 20 psi Steam | @ 50 psi Steam | @ 80 psi Steam | Max. Suction Lift, ft. | For Liquids | For Gases | Temp. Range, °F | Pipe Size | Thread Type | Pipe Size | Thread Type | Pipe Size | Thread Type | Lg. | Wd. | Each | |
For Use With Air, Inert Gas, Steam, Water | |||||||||||||||||||
316 Stainless Steel | |||||||||||||||||||
6 | 5 | 3 | 5 | 4 | 3 | 20 | 35-150 | 20-80 | -150° to 150° | 1/2 | NPT | 3/8 | NPT | 1/2 | NPT | 4 1/2" | 1 1/8" | 0000000 | 0000000 |
10 | 9 | 5 | 8 | 6 | 6 | 20 | 35-150 | 20-80 | -150° to 150° | 3/4 | NPT | 1/2 | NPT | 3/4 | NPT | 5 7/8" | 1 1/4" | 0000000 | 000000 |
17 | 15 | 9 | 14 | 11 | 10 | 20 | 35-150 | 20-80 | -150° to 150° | 1 | NPT | 3/4 | NPT | 1 | NPT | 7 1/8" | 1 3/4" | 0000000 | 000000 |
31 | 27 | 15 | 24 | 20 | 17 | 20 | 35-150 | 20-80 | -150° to 150° | 1 1/4 | NPT | 1 | NPT | 1 1/4 | NPT | 9" | 2 3/8" | 0000000 | 000000 |