Use this general purpose grease to lubricate most machinery.

This grease performs well in a wide range of bearing types.

Made with moisture-resistant thickeners, this grease stays in place in wet environments.

Use this grease in food-processing and preparation areas. It is NSF registered H1 or meets FDA Compliant 21 CFR 178.3570 for incidental contact with food.

Fluorocarbon and fluorinated polymer thickeners add chemical resistance to this grease. It remains intact when exposed to water and most solvents and chemicals.

Often used with engine bolts and heavily-loaded, slow-moving gears, these lubricants are formulated with moly (molybdenum disulfide) to prevent parts from locking together under high loads and pressure.

Free of metal particles, these lubricants won’t react with stainless steel. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

These lubricants dry to form a thin, solvent-resistant film that won't squeeze out or attract dirt. Use them to prevent threaded fasteners and close-fitting parts from locking together.

By traveling along individual strands and penetrating to the core of wire rope and cable, these lubricants maximize coverage to prevent rust and reduce wear. They cut through dirt, grease, and rust to protect wire rope and cable.

For use with roller chain and other moving metal parts, these thin lubricants cut through dirt, grease, and rust, withstand heavy loads, and resist wear.

Also known as antifriction coatings, these slippery coatings cure to provide permanent lubrication. They're made with moly for high-load applications, such as hinges, gears, and rods. They fill in surface imperfections for a smooth, dry finish that won’t attract dust.

Thin enough to penetrate inside chain pins and links, yet tacky so it stays in place, use this oil to lubricate chain and roller chain.