Designed to withstand vandalism better than other deadbolt locks for double doors, these mortise mount into a cutout in the doors. All have a latch bolt to secure doors in the closed position.

Automatic locks retract when one double door is opened to allow the other door to open.

Automatic/manual locks include an automatic bolt lock for the bottom of a door and a manual bolt lock for the top.

Able to withstand vandalism better than other crossbars, these mortise mount into a cutout in the door. Crossbars have a traditional design that is common in older installations. They open doors with a push and are often used on emergency exits. You can use them alone or mount an optional handle on the outside of the door. All can be cut to fit a range of door widths.

To determine door swing direction, stand on the side of the door where it swings away from you. If it opens to the right, select a right crossbar; if it opens to the left, select a left crossbar. Latch bolt projection is the length the latch bolt extends from the door's edge.

Designed to withstand vandalism better than other lock cylinders, these are for use in locks that are mortise mounted into a cutout in the door. Choose them if you need several lock cylinders that open with the same key. They are commonly used in deadbolt door locks and touch bars with alarms. Cylinders have either a standard cam or a cam specifically for Adams-Rite locks. All have a five-pin tumbler locking mechanism.

Designed to withstand vandalism better than other lock cylinders, these are for use in locks that are mortise mounted into a cutout in the door. Choose them if you need lock cylinders that each open with a different key. They are commonly used in deadbolt door locks and touch bars with alarms. Cylinders have either a standard cam or a cam specifically for Adams-Rite locks. All have a five-pin tumbler locking mechanism.

Doors stay closed with the pressure of rollers against the strike plate.

Styles 3-5 have a projection adjustment screw to adjust the roller projection from 0" to 3/8" to compensate for misalignment.

For technical drawings and 3-D models, click on a part number.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold. Latches meet UL 94HB for flammability.

The mortise-mount latches fit into a cutout (mortise) to mount flush with doors.

For technical drawings and 3-D models, click on a part number.

Magnetic force holds doors closed. These latches can often be found on audio/visual cabinets. Note: Maximum pull-strength rating given is based on installation with the furnished strike plate; pull strength may be different based on the application.

For technical drawings and 3-D models, click on a part number.

Close and open these magnetic latches with a push—there's no need for a handle. Magnetic force holds doors closed. Note: Maximum pull-strength rating given is based on installation with the furnished strike plate; pull strength may be different based on the application.

Each latch has a wraparound and flat strike plate.

For technical drawings and 3-D models, click on a part number.

Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.

For technical drawings and 3-D models, click on a part number.

Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers. They're keyed alike, choose them if you need several locks that open with the same key.

For technical drawings and 3-D models, click on a part number.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount this latch vertically or horizontally. It has two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need locks that each open with a different key. A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount this latch vertically or horizontally. It has two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.

For technical drawings and 3-D models, click on a part number.

These latches arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately).

Style C latches have a handle that lifts and then folds out of the way when not in use.

Multiple-point latch kits have a rod and a rod guide.

For technical drawings and 3-D models, click on a part number.

Choose these keyed alike locks if you need several that open with the same key. They have a T-handle that lifts and then folds out of the way when not in use. Locks arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately).

Multiple-point latch kits have a rod and a rod guide.

For technical drawings and 3-D models, click on a part number.

The ring handle is recessed to stay out of the way when not in use. This latch arrives ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately). Select the turn direction of the latches when mounting the cam.

Multiple-point latch kits have a rod and a rod guide.

For technical drawings and 3-D models, click on a part number.

In addition to a safety catch to prevent accidental opening, these latches use downward compression to pull surfaces together for sealing gasketed doors. Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.

Mortise-mount latches are recessed to create a nearly flat surface that protects the latch from damage.

For technical drawings and 3-D models, click on a part number.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces. A safety catch prevents accidental opening. Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.

Mortise-mount latches are recessed to create a nearly flat surface that protects the latch from damage.

For technical drawings and 3-D models, click on a part number.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment. Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.

Mortise-mount latches are recessed to create a nearly flat surface that protects the latch from damage.

For technical drawings and 3-D models, click on a part number.

Use a 5/16" hex key to open and close these latches. A hole must be drilled in your panel for hex key access when mortise mounting. Capacity is the maximum amount of force the latch can withstand.

Style A has front tab mounting holes for mortise mounting.

Styles B and C have both side and back mounting holes, so they attach to the side of the panel or mortise into the panel.

For technical drawings and 3-D models, click on a part number.

Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.

Mortise-mount latch is recessed to create a nearly flat surface that protects the latch from damage. It also has a spring-loaded handle that provides a tight hold and compensates for slight misalignment.

For technical drawings and 3-D models, click on a part number.

These concealed latches snap together. Reversible for right- and left-hand mounting, each latch comes with a strike plate that has a built-in door stop for toilet partitions.

Style B is ADA compliant when properly installed.

For technical drawings and 3-D models, click on a part number.

Safeguard sliding doors in wire and chain link partitions. Lock opens with a turnpiece on one side and has an opening for a pry-resistant lock cylinder for mortise-mount locks (not included) on the other. A strike plate (sold separately) is required.

For technical drawings and 3-D models, click on a part number.