Designed to withstand vandalism better than other lock cylinders, these are for use in locks that are mortise mounted into a cutout in the door. Choose them if you need several lock cylinders that open with the same key. They are commonly used in deadbolt door locks and touch bars with alarms. Cylinders have either a standard cam or a cam specifically for Adams-Rite locks. All have a five-pin tumbler locking mechanism.

For technical drawings and 3-D models, click on a part number.

Designed to withstand vandalism better than other lock cylinders, these are for use in locks that are mortise mounted into a cutout in the door. Choose them if you need lock cylinders that each open with a different key. They are commonly used in deadbolt door locks and touch bars with alarms. Cylinders have either a standard cam or a cam specifically for Adams-Rite locks. All have a five-pin tumbler locking mechanism.

For technical drawings and 3-D models, click on a part number.

Designed to withstand vandalism better than other deadbolt locks for double doors, these mortise mount into a cutout in the doors. All have a latch bolt to secure doors in the closed position.

Automatic locks retract when one double door is opened to allow the other door to open.

Automatic/manual locks include an automatic bolt lock for the bottom of a door and a manual bolt lock for the top.

For technical drawings and 3-D models, click on a part number.

Able to withstand vandalism better than other crossbars, these mortise mount into a cutout in the door. Crossbars have a traditional design that is common in older installations. They open doors with a push and are often used on emergency exits. You can use them alone or mount an optional handle on the outside of the door. All can be cut to fit a range of door widths.

To determine door swing direction, stand on the side of the door where it swings away from you. If it opens to the right, select a right crossbar; if it opens to the left, select a left crossbar. Latch bolt projection is the length the latch bolt extends from the door's edge.

Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers. They're keyed alike, choose them if you need several locks that open with the same key.

For technical drawings and 3-D models, click on a part number.

A catch grabs and holds the strike plate to keep doors shut.

For technical drawings and 3-D models, click on a part number.

Doors stay closed with the pressure of rollers against the strike plate.

Styles 3-5 latches have a projection adjustment screw to adjust the roller projection from 0" to 3/8" to compensate for misalignment.

For technical drawings and 3-D models, click on a part number.

Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.

For technical drawings and 3-D models, click on a part number.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold. Latches meet UL 94 HB for flammability.

The mortise-mount latches fit into a cutout (mortise) to mount flush with doors.

For technical drawings and 3-D models, click on a part number.

Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.

Mortise-mount latch is recessed to create a nearly flat surface that protects the latch from damage. It also has a spring-loaded handle that provides a tight hold and compensates for slight misalignment.

For technical drawings and 3-D models, click on a part number.

In addition to a safety catch to prevent accidental opening, these latches use downward compression to pull surfaces together for sealing gasketed doors. Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.

Mortise-mount latches are recessed to create a nearly flat surface that protects the latch from damage.

For technical drawings and 3-D models, click on a part number.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment. Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.

Mortise-mount latches are recessed to create a nearly flat surface that protects the latch from damage.

For technical drawings and 3-D models, click on a part number.

Use a 5/16" hex key to open and close these latches. A hole must be drilled in your panel for hex key access when mortise mounting. Capacity is the maximum amount of force the latch can withstand.

Style A has front tab mounting holes for mortise mounting.

Styles B and C have both side and back mounting holes, so they attach to the side of the panel or mortise into the panel.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need several that open with the same key. Locks arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately).

The T-handle on mortise-mount locks lifts and then folds out of the way when not in use.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

Use these latches alone for single-point latching. Add latch kits for multiple-point latching to create additional holding power.

Style A-C latches arrive ready for single-point latching; add a latch kit for two-point latching or two latch kits for three-point latching.

Style C latches have a handle that lifts and then folds out of the way when not in use.

For technical drawings and 3-D models, click on a part number.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount these latches vertically or horizontally. They have two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.

Choose keyed alike locks when you need several locks that open with the same key.

Keyed differently locks each open with a different key.

For technical drawings and 3-D models, click on a part number.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount this latch vertically or horizontally. It has two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.

For technical drawings and 3-D models, click on a part number.