Also known as occupancy sensors, these controls turn lights on when movement is detected and off when an area is unoccupied. The infrared/ultrasonic sensors minimize false activation by detecting heat and motion. They can be set so that only one or both detection methods are required to activate and hold lights on. All have a time delay to turn lights off after a set time. The mounting bracket swivels 90° so that the control can be mounted on a wall or ceiling.

Power controllers (sold separately) are required to switch a 120- or 277-volt AC lighting circuit. They have a relay that switches a maximum 20 amp load.

Also known as occupancy sensors, these controls turn lights on when movement is detected and off when an area is unoccupied. All have a time delay to turn lights off after a set time.

Infrared sensors detect moving heat sources and require a direct view of the occupants.

Infrared/ultrasonic sensors minimize false activation by detecting changes in heat sources and motion. They can be set so that only one or both detection methods are required to activate and hold lights on.

Ultrasonic sensors detect movement and don’t require a direct view of the occupants.

Wire switches to an alarm system to activate when motion is detected. They can be set to ignore objects that weigh less than 80 pounds.

Heads adjust to any angle to direct light where needed. These lights automatically turn on when the sensor detects motion. Lights turn off when an area is unoccupied.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other technologies.

Style A produce a neutral white light. They detect motion up to 70 feet away.

Style B detect motion up to 70 feet away. They are compatible with LED, CFL, halogen, and incandescent bulbs (sold separately).

Style C are battery-operated—use where you don't have access to electricity. These lights emit a cool light appearance, which highlights white/blue tones creating good visibility at night. They detect motion up to 30 feet away.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces. They turn on when they detect motion. These lights use a built-in LED bulb that lasts longer, is more efficient, and generates less heat than alternatives.

The solar panel is separate from style A, B, and C lights, so you can place the panel in direct sunlight while mounting the light in a shaded area. Even though they’re detached from the panel, these lights have an integrated sensor that prevents them from turning on during the day.

The solar panel is built into the top of style D, E, and F lights, so there’s no need to run wire between the two. These lights must be mounted in the sun so they can charge during the day.

Style E and F lights are protected from low-pressure jets of liquid such as water from a garden hose.

Use sun energy to bring light to remote areas and storage spaces without electrical wiring. These lights come with a solar panel to recharge their battery. Simply connect the lights to the panel and place the panel in full sunlight to charge. To power the battery faster, you can also plug these lights into a charger using the included USB cable. A USB output port allows you to power other smart devices and accessories with these lights, as well.

All lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a neutral light appearance that’s often found in workspaces. An impact-resistant plastic lens protects the LEDs. You can dim these lights to conserve battery life. To use them as a security light in unsupervised areas at night, set them to auto mode—they’ll turn on automatically in the dark or when they detect motion.

Use the included mounting holes and brackets to secure these lights permanently to the wall, or hang them temporarily with the included fold-out D-rings. The solar panel also has a mounting bracket to secure the panel to horizontal and vertical surfaces. It’s adjustable, so you can rotate and tilt the panel to achieve the best angle for maximum sunlight exposure.

These lights cannot be sold to Canada due to energy efficiency regulations.

Don’t waste energy lighting unoccupied spaces—these lights turn on when they detect movement and off after three minutes of not detecting movement. Commonly used in hallways and small storage spaces, they have built-in LEDs, which are more efficient, and generate less heat than other light technologies. They also emit a neutral white light often found in workspaces. These lights meet NFPA 70, which means they’ve passed strict safety standards. They cannot be sold to California because of local energy efficiency requirements.

Mount these fixtures where you need light but don't have an electrical connection. They turn on when movement is detected and off when an area is unoccupied, so they work well in hallways and small storage areas. Long-lasting and energy efficient, these lights have built-in LEDs. They emit a neutral white light often found in workspaces. A prismatic, frosted lens disperses light evenly.

No electricity or batteries are needed—as your door opens, the magnet and contact disc are separated, sounding a mechanical chime. The chime can be deactivated.

A chime announces when someone passes through the infrared light beam and a counter keeps track of each entrance and exit. Mount the transmitter and beam reflector between 2 and 20 feet apart. The chime's volume is adjustable up to 85 dB. It cannot be sold to California due to local energy efficiency regulations.

Additional chimes (sold separately) can be added to the transmitter.