Input Voltage Input Voltage |
|---|
|
Reversing Capability Reversing Capability |
|---|
|
Specifications Met Specifications Met |
|---|
|
|
Voltage Voltage |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
About Electric Motors
When replacing a motor, use the information on your motor’s nameplate to guide your selection.
More
About Motor Switches and Starters
More
DIN-Rail Mount Programmable
Three-Phase AC Motor Speed Controls
Mount these controls to DIN rail inside a control panel. Set them to automatically adjust motor speed. Wire a potentiometer (not included) for remote manual control.
For technical drawings and 3-D models, click on a part number.
Output | Input Signal | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Horsepower, hp | Input Voltage | Current, A | Voltage | Frequency, Hz | Voltage | Current, mA | Ht. | Wd. | Reversing Capability | For DIN Rail Ht., mm | Specifications Met | Each | |
Single-Phase Input | |||||||||||||
| 1/2 | 100-120V AC | 2.4 | 230V AC | 0-320 | 0-10V DC | 4-20 | 7.68" | 3.54" | Reversing | 35 | UL Listed C-UL Listed CE Marked | 0000000 | 0000000 |
| 3/4 | 200-240V AC | 2.8 | 230V AC | 0-320 | 0-10V DC | 4-20 | 6.3" | 2.6" | Reversing | 35 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 1 | 100-120V AC | 3.7 | 230V AC | 0-320 | 0-10V DC | 4-20 | 7.68" | 3.54" | Reversing | 35 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 1 1/2 | 100-120V AC | 4.8 | 230V AC | 0-320 | 0-10V DC | 4-20 | 9.96" | 3.94" | Reversing | 35 | UL Listed CE Marked | 0000000 | 000000 |
| 2 | 200-240V AC | 7 | 230V AC | 0-320 | 0-10V DC | 4-20 | 7.68" | 3.54" | Reversing | 35 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 3 | 200-240V AC | 9.6 | 230V AC | 0-320 | 0-10V DC | 4-20 | 9.96" | 3.94" | Reversing | 35 | UL Listed CE Marked | 0000000 | 000000 |
Three-Phase Input | |||||||||||||
| 3/4 | 200-240V AC | 2.8 | 230V AC | 0-320 | 0-10V DC | 4-20 | 6.3" | 2.6" | Reversing | 35 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 1 | 200-240V AC | 3.7 | 230V AC | 0-320 | 0-10V DC | 4-20 | 7.68" | 3.54" | Reversing | 35 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 1 | 380-480V AC | 2.4 | 460V AC | 0-320 | 0-10V DC | 4-20 | 6.3" | 2.6" | Reversing | 35 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 2 | 200-240V AC | 7 | 230V AC | 0-320 | 0-10V DC | 4-20 | 7.68" | 3.54" | Reversing | 35 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 3 | 200-240V AC | 11 | 230V AC | 0-320 | 0-10V DC | 4-20 | 9.96" | 3.94" | Reversing | 35 | UL Listed CE Marked | 0000000 | 000000 |
| 3 | 380-480V AC | 5.6 | 460V AC | 0-320 | 0-10V DC | 4-20 | 7.68" | 3.54" | Reversing | 35 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 5 | 380-480V AC | 9 | 460V AC | 0-320 | 0-10V DC | 4-20 | 9.96" | 3.94" | Reversing | 35 | UL Listed CE Marked | 0000000 | 000000 |
| 7 1/2 | 380-480V AC | 12 | 460V AC | 0-320 | 0-10V DC | 4-20 | 9.96" | 3.94" | Reversing | 35 | UL Listed CE Marked | 0000000 | 00000000 |
Programmable Three-Phase AC Motor Speed Controls
Set these controls to automatically adjust motor speed. Wire a potentiometer (not included) for remote manual control.
For technical drawings and 3-D models, click on a part number.
Output | Input Signal | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Horsepower, hp | Input Voltage | Current, A | Voltage | Frequency, Hz | Voltage | Current, mA | Ht. | Wd. | Reversing Capability | Environmental Rating | Specifications Met | Each | |
Single-Phase Input | |||||||||||||
| 1 | 115V AC/230V AC | 4 | 230V AC | 0-120 | 0-10V DC | 4-20 | 7.5" | 6.5" | Reversing | NEMA 1 | UL Listed C-UL Listed CE Marked | 0000000 | 0000000 |
| 1 1/2 | 115V AC/230V AC | 5.2 | 230V AC | 0-120 | 0-10V DC | 4-20 | 7.5" | 6.5" | Reversing | NEMA 1 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 2 | 200-230V AC | 6.8 | 230V AC | 0-120 | 0-10V DC | 4-20 | 7.5" | 6.5" | Reversing | NEMA 1 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 3 | 200-230V AC | 9.6 | 230V AC | 0-120 | 0-10V DC | 4-20 | 7.5" | 6.5" | Reversing | NEMA 1 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
Three-Phase Input | |||||||||||||
| 1 | 200-240V AC | 4 | 200-240V AC | 0-120 | 0-10V DC | 4-20 | 7.5" | 5.08" | Reversing | NEMA 1 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 1 | 400-480V AC | 2 | 400-480V AC | 0-120 | 0-10V DC | 4-20 | 7.5" | 5.08" | Reversing | NEMA 1 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 2 | 200-240V AC | 6.8 | 200-240V AC | 0-120 | 0-10V DC | 4-20 | 7.5" | 6.5" | Reversing | NEMA 1 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 3 | 200-240V AC | 9.6 | 200-240V AC | 0-120 | 0-10V DC | 4-20 | 7.5" | 6.5" | Reversing | NEMA 1 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 5 | 200-240V AC | 15.2 | 200-240V AC | 0-120 | 0-10V DC | 4-20 | 7.9" | 8.24" | Reversing | NEMA 1 | UL Listed C-UL Listed CE Marked | 0000000 | 00000000 |
| 5 | 400-480V AC | 7.6 | 400-480V AC | 0-120 | 0-10V DC | 4-20 | 7.5" | 6.5" | Reversing | NEMA 1 | UL Listed C-UL Listed CE Marked | 0000000 | 00000000 |
Washdown Programmable
Three-Phase AC Motor Speed Controls
Rated NEMA 4, these controls are protected from washdowns. Set them to automatically adjust motor speed. Wire a potentiometer (not included) for remote manual control.
For technical drawings and 3-D models, click on a part number.
Output | Input Signal | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Horsepower, hp | Input Voltage | Current, A | Voltage | Frequency, Hz | Voltage | Current, mA | Ht. | Wd. | Reversing Capability | Environmental Rating | Specifications Met | Each | |
Three-Phase Input | |||||||||||||
| 1 | 200-240V AC | 4 | 200V AC-240V AC | 0-120 | 0-10V DC | 4-20 | 7.9" | 6.5" | Reversing | NEMA 4 | UL Listed C-UL Listed CE Marked | 0000000 | 0000000 |
| 2 | 200-240V AC | 6.8 | 200V AC-240V AC | 0-120 | 0-10V DC | 4-20 | 7.9" | 8.24" | Reversing | NEMA 4 | UL Listed C-UL Listed CE Marked | 0000000 | 000000 |
| 2 | 400-480V AC | 3.4 | 400V AC-480V AC | 0-120 | 0-10V DC | 4-20 | 7.9" | 8.24" | Reversing | NEMA 4 | UL Listed C-UL Listed CE Marked | 0000000 | 00000000 |
| 3 | 400-480V AC | 4.8 | 400V AC-480V AC | 0-120 | 0-10V DC | 4-20 | 7.9" | 8.24" | Reversing | NEMA 4 | UL Listed C-UL Listed CE Marked | 0000000 | 00000000 |
Three-Phase AC Motor Speed Controls
Vary the speed of three-phase AC motors. Mount these controls inside a machine or control cabinet. They’re often used in packaging machines, conveyors, and vacuum equipment. Operate controls manually or remotely with an electrical signal.
Input adapters (sold separately) allow controls to accept a range of input voltages and current. Mount to the bottom of the control.
For technical drawings and 3-D models, click on a part number.
Output | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Horsepower, hp | Input Voltage | Voltage | Frequency, Hz | Ht. | Wd. | Reversing Capability | Features | Specifications Met | Each | |
Single-Phase Input | ||||||||||
| 1/2 | 115V AC/230V AC | 230V AC | 0-120 | 3" | 4.3" | Reversing | Maximum Speed Setting, Run and Jog Modes, Torque Boost | UL Listed, C-UL Listed | 0000000 | 0000000 |
| 1 | 115V AC/230V AC | 230V AC | 0-120 | 4.4" | 6.9" | Reversing | Maximum Speed Setting, Run and Jog Modes, Torque Boost | UL Listed, C-UL Listed | 0000000 | 000000 |
Input Signal | |||
|---|---|---|---|
| Voltage | Current, mA | Each | |
| 0V DC-5V DC/0V DC-10V DC | 4-20 | 0000000 | 0000000 |
Enclosed AC to DC Motor Speed Controls
Housed in a durable steel enclosure, these controls convert AC input voltage into DC output voltage and control the speed of permanent-magnet DC motors.
A heat sink (sold separately) is required with outputs greater than 5 amps.
For technical drawings and 3-D models, click on a part number.
| Horsepower (Input Voltage/Output Voltage) | Current, A | Ht. | Wd. | Reversing Capability | Wire Connection Type | Environment | Environmental Rating | Specifications Met | Each | |
Single Phase | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/8-1 (115V AC/0-90V DC) 1/4-2 (230V AC/0-180V DC) | 10 | 8" | 6" | Nonreversing | Screw Terminals | Indoor | NEMA 1 | UL Listed, C-UL Listed, NEMA 1 | 0000000 | 0000000 |
| Heat Sink | 0000000 | Each | 000000 |
Reversing Enclosed AC to DC Motor Speed Controls
Use these controls with motors that run forward and backward, such as motors for conveyor belts. They convert AC input voltage into DC output voltage and control the speed of permanent-magnet DC motors. Housed in a durable steel enclosure.
A heat sink (sold separately) is required with outputs greater than 5 amps.
For technical drawings and 3-D models, click on a part number.
| Horsepower (Input Voltage/Output Voltage) | Current, A | Ht. | Wd. | Reversing Capability | Wire Connection Type | Environment | Environmental Rating | Specifications Met | Each | |
Single Phase | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/8-1 (115V AC/0-90V DC) 1/4-2 (230V AC/0-180V DC) | 10 | 8" | 6" | Reversing | Screw Terminals | Indoor | NEMA 1 | UL Listed, C-UL Listed | 0000000 | 0000000 |
| Heat Sink | 0000000 | Each | 000000 |
AC to DC Motor Speed Controls
Convert AC input voltage into DC output voltage and control the speed of permanent-magnet DC motors.
A heat sink (sold separately) is required with outputs greater than 5 amps.
For technical drawings and 3-D models, click on a part number.
Reversing Washdown Enclosed
AC to DC Motor Speed Controls
Use these controls with motors that run forward and backward, such as motors for conveyor belts. They have a NEMA 4X rated enclosure to withstand corrosion and washdowns. Use them to convert AC input voltage into DC output voltage and control the speed of permanent-magnet DC motors.
For technical drawings and 3-D models, click on a part number.
| Horsepower (Input Voltage/Output Voltage) | Current, A | Ht. | Wd. | Reversing Capability | Wire Connection Type | Environmental Rating | Specifications Met | Each | |
Single Phase | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8-1 (115V AC/0-90V DC) 1/4-2 (230V AC/0-180V DC) | 10 | 7.5" | 5.63" | Reversing | Screw Terminals | NEMA 4X | UL Listed, C-UL Listed | 0000000 | 0000000 |
Washdown Enclosed AC to DC Motor Speed Controls
A NEMA 4X rated enclosure protects these controls from corrosion and washdowns. They convert AC input voltage into DC output voltage and control the speed of permanent-magnet DC motors.
For technical drawings and 3-D models, click on a part number.
| Horsepower (Input Voltage/Output Voltage) | Current, A | Ht. | Wd. | Reversing Capability | Wire Connection Type | Environmental Rating | Specifications Met | Each | |
Single Phase | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8-1 (115V AC/0-90V DC) 1/4-2 (230V AC/0-180V DC) | 10 | 7.5" | 5.63" | Nonreversing | Screw Terminals | NEMA 4X | UL Listed, C-UL Listed | 0000000 | 0000000 |
Low-Voltage DC Motor Speed Controls
Control the speed of low-voltage permanent-magnet DC motors. These controls accept DC input voltage and supply a variable DC output voltage. Set a minimum and maximum speed and adjust the current limit on these controls. Operate controls manually or remotely with an electrical signal.
For technical drawings and 3-D models, click on a part number.
| Horsepower (Input Voltage/Output Voltage) | Current, A | Ht. | Wd. | Reversing Capability | Wire Connection Type | Features | Specifications Met | Each | |
| 1/6 (12V DC/0-12V DC) 1/6-1/3 (24V DC/0-24V DC) | 16 | 6.9" | 4.4" | Nonreversing | Screw Terminals | Overload Protection | C-UL Listed | 0000000 | 0000000 |
| 3/4 (12V DC/0-12V DC) 3/4-1 (24V DC/0-24V DC) | 60 | 7.8" | 6.9" | Nonreversing | Screw Terminals | Overload Protection | C-UL Listed | 0000000 | 000000 |
Position-Control DC Motors with
Integrated Driver and Controller
An all-in-one solution for precise positioning, these motors are often used to move CNC heads and other automated systems. Connect to a computer with the included cable to program them—they can store up to 16 settings. Also known as stepper motors, they turn their shaft in small increments (steps).
Motors with a sensor and encoder track how far the shaft rotates and signals to the driver to move the motor if necessary. Closed loop feedback detects and corrects the motor if it becomes overloaded or loses power, making them more accurate than traditional stepper motors.
For technical drawings and 3-D models, click on a part number.
Full Step | Overall | Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Speed, rpm | Continuous Operating Torque, in.-oz. | Increment | Steps per Second | Smallest Step Increment | DC Voltage | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base (A) | Feedback Type | Each | |
Motors | |||||||||||||||
NEMA 17 | |||||||||||||||
| 750 | 9.5 | 1.8° | 2,500 | 0.007° | 12-40 | 1.1 | 4 1/4" | 1 3/4" | 1 3/4" | 0.2" | 0.94" | 0.84" | __ | 0000000 | 0000000 |
| 1,200 | 6.2 | 1.8° | 4,000 | 0.007° | 12-40 | 0.9 | 3 3/4" | 1 3/4" | 1 3/4" | 0.2" | 0.94" | 0.84" | __ | 0000000 | 000000 |
| 1,500 | 6.3 | 1.8° | 5,000 | 0.007° | 12-40 | 1.4 | 4" | 1 3/4" | 1 3/4" | 0.2" | 0.94" | 0.84" | __ | 0000000 | 000000 |
Motors With Sensor and Encoder | |||||||||||||||
NEMA 17 | |||||||||||||||
| 3,000 | 10 | 1.8° | 10,000 | 0.007° | 12-48 | 1 | 3 7/8" | 1 3/4" | 2 7/16" | 0.2" | 0.87" | 0.84" | Closed Loop | 00000000 | 000000 |
| 3,000 | 12.5 | 1.8° | 10,000 | 0.007° | 12-48 | 1.1 | 3 5/8" | 1 3/4" | 2 7/16" | 0.2" | 0.87" | 0.84" | Closed Loop | 00000000 | 000000 |
| 3,000 | 13 | 1.8° | 10,000 | 0.007° | 12-48 | 1.1 | 4 1/8" | 1 3/4" | 2 7/16" | 0.2" | 0.87" | 0.84" | Closed Loop | 00000000 | 000000 |
NEMA 23 | |||||||||||||||
| 750 | 20 | 1.8° | 2,500 | 0.007° | 12-40 | 2.8 | 5 1/8" | 2 1/4" | 2 1/4" | 1/4" | 3/4" | 1.13" | Closed Loop | 00000000 | 000000 |
| 1,500 | 21 | 1.8° | 2,600 | 0.007° | 12-40 | 2.8 | 3 3/4" | 2 1/4" | 2 1/4" | 1/4" | 3/4" | 1.13" | Closed Loop | 00000000 | 000000 |
| 2,160 | 18 | 1.8° | 7,200 | 0.007° | 12-40 | 4.2 | 4 1/4" | 2 1/4" | 2 1/4" | 1/4" | 3/4" | 1.13" | Closed Loop | 00000000 | 000000 |
Position Control DC Motors, Drivers, and Controllers
Also known as stepper motors, these motors turn their shaft in discrete increments for precise position control. Shaft can turn clockwise or counterclockwise.
Motors require drivers and/or controllers (sold separately) to operate.
Drivers convert voltage into pulses that rotate the motor shaft. All drivers require a controller, PLC, or computer to function. They come with a data cable, except 6627T59 and 6627T62 do not come with a data cable. 6627T81 comes with instructions.
Controllers store programs to run the drivers. Controllers for NEMA 8, 11, 14, and 17 motors store up to 16 programs. Controller for NEMA 23 and 34 motors stores 2 programs that it can run simultaneously. It requires a driver to operate (sold separately).
For technical drawings and 3-D models, click on a part number.
Motors | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Shaft | Drivers | Controllers | ||||||||||||||
| Max. Speed, rpm | Continuous Operating Torque, in.-oz. | Full Load Current, A | Full Steps per Second | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base (A) | Each | DC Voltage | Each | DC Voltage | Each | |||
NEMA 8 | |||||||||||||||||
| 3,000 | 1.6 | 0.6 | 10,000 | 2" | 3/4" | 3/4" | 0.16" | 0.59" | 0.4" | 0000000 | 0000000 | 12-24 | 0000000 | 0000000 | 12-40 | 0000000 | 0000000 |
| 3,750 | 1.6 | 0.8 | 12,500 | 2 1/4" | 3/4" | 3/4" | 0.16" | 0.59" | 0.4" | 0000000 | 000000 | 12-24 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
NEMA 11 | |||||||||||||||||
| 2,250 | 1.8 | 0.7 | 7,500 | 2 3/4" | 1" | 1" | 0.2" | 0.79" | 0.56" | 0000000 | 00000 | 12-24 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
| 2,250 | 2 | 0.7 | 7,500 | 2 1/2" | 1" | 1" | 0.2" | 0.79" | 0.56" | 0000000 | 00000 | 12-24 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
| 3,000 | 2 | 0.7 | 10,000 | 2" | 1" | 1" | 0.2" | 0.79" | 0.56" | 0000000 | 00000 | 12-24 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
NEMA 14 | |||||||||||||||||
| 750 | 10.2 | 0.8 | 2,500 | 2" | 1 1/2" | 1 1/2" | 0.2" | 0.6" | 0.7" | 0000000 | 00000 | 12-24 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
| 3,000 | 2.8 | 0.5 | 10,000 | 1 1/2" | 1 1/2" | 1 1/2" | 0.2" | 0.6" | 0.7" | 0000000 | 00000 | 12-24 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
NEMA 17 | |||||||||||||||||
| 750 | 7.5 | 0.7 | 2,500 | 2 1/2" | 1 3/4" | 1 3/4" | 0.2" | 0.94" | 0.84" | 0000000 | 00000 | 12-24 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
| 750 | 8.9 | 1 | 2,500 | 2 3/4" | 1 3/4" | 1 3/4" | 0.2" | 0.85" | 0.84" | 0000000 | 00000 | 12-24 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
| 900 | 8.8 | 0.6 | 3,000 | 2 1/4" | 1 3/4" | 1 3/4" | 0.2" | 0.94" | 0.84" | 0000000 | 00000 | 12-24 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
| 900 | 18.9 | 2 | 3,000 | 3 1/4" | 1 3/4" | 1 3/4" | 0.2" | 0.85" | 0.84" | 0000000 | 00000 | 12-48 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
| 1,230 | 7 | 0.7 | 4,100 | 2" | 1 3/4" | 1 3/4" | 0.2" | 0.94" | 0.84" | 0000000 | 00000 | 12-24 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
| 2,250 | 8 | 2 | 7,500 | 2 3/4" | 1 3/4" | 1 3/4" | 0.2" | 0.94" | 0.84" | 0000000 | 00000 | 12-48 | 0000000 | 000000 | 12-40 | 0000000 | 000000 |
NEMA 23 | |||||||||||||||||
| 600 | 17 | 2.8 | 2,000 | 3" | 2 1/4" | 2 1/4" | 0.25" | 0.81" | 1.13" | 0000000 | 00000 | 12-48 | 0000000 | 000000 | 12-48 | 0000000 | 000000 |
| 900 | 35 | 6 | 3,000 | 5" | 2 1/4" | 2 1/4" | 0.25" | 0.81" | 1.13" | 0000000 | 000000 | 12-80 | 0000000 | 000000 | 12-48 | 0000000 | 000000 |
| 2,250 | 23 | 4 | 7,000 | 4" | 2 1/4" | 2 1/4" | 0.25" | 0.81" | 1.13" | 0000000 | 000000 | 12-80 | 0000000 | 000000 | 12-48 | 0000000 | 000000 |
NEMA 34 | |||||||||||||||||
| 600 | 22 | 4.2 | 2,000 | 4" | 3 1/2" | 3 1/2" | 0.5" | 1.46" | 1.7" | 0000000 | 000000 | 12-80 | 0000000 | 000000 | 12-48 | 0000000 | 000000 |
| 600 | 50 | 4.8 | 2,000 | 6 1/2" | 3 1/2" | 3 1/2" | 0.5" | 1.46" | 1.7" | 0000000 | 000000 | 12-80 | 0000000 | 000000 | 12-48 | 0000000 | 000000 |
| 720 | 70 | 4.2 | 2,400 | 5 1/4" | 3 1/2" | 3 1/2" | 0.5" | 1.46" | 1.7" | 0000000 | 000000 | 12-80 | 0000000 | 000000 | 12-48 | 0000000 | 000000 |
Speed-Control Motors
 Motor |  Control Face |  |
 |
Maintain speed automatically. These motors come with a speed control with a feedback sensor that adjusts power to maintain your set speed. They combine the speed control characteristics of permanent magnet brushless DC motors with the convenience of AC power—an integrated inverter means they operate on 120 volts AC.
Motors are rated for continuous duty and mount at any angle. Shaft is keyed and comes with key stock. Use the switch on the speed control to set clockwise or counterclockwise rotation.
All have manual overload protection—an LED on the speed control indicates when the overload protection is triggered; use the switch to reset. Control also has an on/off switch and a speed adjustment knob. Panel mount the control up to 10 feet from the motor—it comes with a 10-ft. cable for connection.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | For Panel Cutout | Insulation | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power, hp | Max. Speed, rpm | Starting Torque, in.-lbs. | Torque @ Max. Speed, in.-lbs. | Full Load Current, A | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base (A) | Wd. | Ht. | Class | Max. Temp., ° F | Each | |
NEMA 34 | |||||||||||||||||
| 1/5 | 1,750 | 8.1 | 8.1 | 2 | Totally Enclosed Nonventilated (TENV) | 7 1/2" | 4" | 4 1/4" | 1/2" | 1.21" | 1.93" | 4" | 2 7/8" | B | 266° | 000000 | 0000000 |
| 1/3 | 1,750 | 13.4 | 13.4 | 8 | Totally Enclosed Nonventilated (TENV) | 8 1/2" | 4" | 4 1/4" | 1/2" | 1.21" | 1.93" | 4" | 2 7/8" | B | 266° | 000000 | 00000000 |
| 1/3 | 3,450 | 6.5 | 6.5 | 4 | Totally Enclosed Nonventilated (TENV) | 7 1/2" | 4" | 4 1/4" | 1/2" | 1.21" | 1.93" | 4" | 2 7/8" | B | 266° | 000000 | 00000000 |