Bolt these motors directly to conveyors and other machines to power equipment on food and sanitary lines. They help you meet Good Manufacturing Practices (GMP) since they have many features that make them safe for sanitary and washdown environments: Smooth contours and a laser-marked nameplate reduce the space where bacteria could grow. No feet make them easy to rinse down thoroughly. A stainless steel enclosure, epoxy resin lined interior, and IP69 rating mean they withstand hot spraying water, harsh cleaners, and sanitizers common to food plants. A two-barrier seal keeps water from getting in through the shaft. But, if water does seep in, drain plugs let it out.

These motors are also called C-face motors. They’re rated for continuous duty, so they’ll run equipment that never turns off. Inverter rated, they also work with variable frequency drive (VFD) to run at different speeds. Their conduit box rotates to connect conduit from any side without needing to reroute power.

TENV (totally enclosed nonventilated) motors don’t need a fan or ventilation. They have even fewer places for water and contaminants to get in than TEFC motors.

For technical drawings and 3-D models, click on a part number.

For versatility in food and sanitary lines, these motors mount by their feet or bolt directly to equipment to power pumps and other machines. Many features make them safe for sanitary and washdown environments: Smooth contours and a laser-marked nameplate limit where bacteria could grow. A stainless steel enclosure, epoxy resin lined interior, and IP69 rating mean they stand up to hot spraying water, chemicals, and harsh cleaners often used in food plants. A two-barrier seal on the shaft stops water from getting in. If water does seep in, drain plugs let it out.

Rated for continuous duty, these motors run equipment that never turns off. They’re also inverter rated, so they work with variable frequency drive (VFD) to run at different speeds. The conduit box rotates—no need to reroute power when connecting conduit.

TENV (totally enclosed nonventilated) motors don’t need a fan or ventilation. They have even fewer places for water and contaminants to get in than TEFC motors.

For technical drawings and 3-D models, click on a part number.

Power small machinery in spaces where other motors won’t fit. Motors are rated for continuous duty. You can wire for clockwise or counterclockwise shaft rotation; instructions are included.

Use a motor speed control (not included) to adjust motor speed. Use an AC to DC transformer (not included) to convert AC power to DC power.

Round-face motors have a solid shaft (no keyway). High-performance round-face motors have less torque loss at high speeds than other compact motors.

Square-face motors have a D-profile shaft.

For technical drawings and 3-D models, click on a part number.

With two location options for any-angle mounting, you can put these motors to work in a variety of equipment configurations. Motors are rated for continuous duty and have a keyed shaft that comes with key stock. Wire for clockwise or counterclockwise rotation; instructions are included.

Use a motor speed control (not included) to adjust motor speed. Use an AC to DC transformer (not included) to convert AC power to DC power.

For technical drawings and 3-D models, click on a part number.

Maintain speed automatically. These motors come with a speed control with a feedback sensor that adjusts power to maintain your set speed. They combine the speed control characteristics of permanent magnet brushless DC motors with the convenience of AC power—an integrated inverter means they operate on 120 volts AC.

Motors are rated for continuous duty and mount at any angle. Shaft is keyed and comes with key stock. Use the switch on the speed control to set clockwise or counterclockwise rotation.

All have manual overload protection—an LED on the speed control indicates when the overload protection is triggered; use the switch to reset. Control also has an on/off switch and a speed adjustment knob. Panel mount the control up to 10 feet from the motor—it comes with a 10-ft. cable for connection.

For technical drawings and 3-D models, click on a part number.

Convert speed to torque to get the power you need—gearmotors are a motor and speed reducer in one. You can wire for clockwise or counterclockwise rotation; instructions are included. Gearmotors transmit motion inline with the motor.

To control motor speed, motor controls are also available. To convert AC power to DC power, see AC to DC transformers.

For technical drawings and 3-D models, click on a part number.

A good solution for tight spaces, these gearmotors transmit motion at a 90° angle from the motor, so they’re positioned alongside your application when mounted. Gearmotors combine a motor and speed reducer to lower speed and increase torque.

To control motor speed, motor controls are also available. To convert AC power to DC power, see AC to DC transformers.

For technical drawings and 3-D models, click on a part number.