Power Power |
|---|
|
Motor Frame Size Motor Frame Size | Show |
|---|
|
Motor Frame Size Motor Frame Size | Hide |
|---|
Shaft Diameter Shaft Diameter |
|---|
|
Overall Width Overall Width |
|---|
|
Starting Torque Starting Torque |
|---|
|
|
Mounting Orientation Mounting Orientation |
|---|
|
Motor Type Motor Type |
|---|
|
Continuous Operating Torque Continuous Operating Torque |
|---|
|
|
Radial Load Capacity Radial Load Capacity |
|---|
|
Direction of Operation Direction of Operation |
|---|
|
Power Source Power Source |
|---|
|
Wire Connection Type Wire Connection Type |
|---|
|
Face Shape Face Shape |
|---|
|
Shaft Type Shaft Type |
|---|
|
Motor Enclosure Type Motor Enclosure Type |
|---|
|
Electrical Connection Type Electrical Connection Type |
|---|
|
Mounting Style Mounting Style |
|---|
|
About Electric Motors
When replacing a motor, use the information on your motor’s nameplate to guide your selection.
More
Position Control DC Motors, Drivers, and Controllers
Also known as stepper motors, these motors turn their shaft in discrete increments for precise position control. Shaft can turn clockwise or counterclockwise.
Motors require drivers and/or controllers (sold separately) to operate.
Drivers convert voltage into pulses that rotate the motor shaft. All drivers require a controller, PLC, or computer to function. They come with a data cable, except 6627T59 and 6627T62 do not come with a data cable. 6627T81 comes with instructions.
Controllers store programs to run the drivers. Controller for NEMA 23 and 34 motors stores 2 programs that it can run simultaneously. It requires a driver to operate (sold separately).
For technical drawings and 3-D models, click on a part number.
Motors | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Shaft | Drivers | Controllers | ||||||||||||||
| Max. Speed, rpm | Continuous Operating Torque, in.-oz. | Full Load Current, A | Full Steps per Second | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base (A) | Each | DC Voltage | Each | DC Voltage | Each | |||
NEMA 23 | |||||||||||||||||
| 600 | 17 | 2.8 | 2,000 | 3" | 2 1/4" | 2 1/4" | 0.25" | 0.81" | 1.13" | 0000000 | 000000 | 12-48 | 0000000 | 0000000 | 12-48 | 0000000 | 0000000 |
| 900 | 35 | 6 | 3,000 | 5" | 2 1/4" | 2 1/4" | 0.25" | 0.81" | 1.13" | 0000000 | 000000 | 12-80 | 0000000 | 000000 | 12-48 | 0000000 | 000000 |
| 2,250 | 23 | 4 | 7,000 | 4" | 2 1/4" | 2 1/4" | 0.25" | 0.81" | 1.13" | 0000000 | 000000 | 12-80 | 0000000 | 000000 | 12-48 | 0000000 | 000000 |
Position-Control DC Motors with
Integrated Driver and Controller
An all-in-one solution for precise positioning, these motors are often used to move CNC heads and other automated systems. Connect to a computer with the included cable to program them—they can store up to 16 settings. Also known as stepper motors, they turn their shaft in small increments (steps).
Motors with a sensor and encoder track how far the shaft rotates and signals to the driver to move the motor if necessary. Closed loop feedback detects and corrects the motor if it becomes overloaded or loses power, making them more accurate than traditional stepper motors.
For technical drawings and 3-D models, click on a part number.
Full Step | Overall | Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Speed, rpm | Continuous Operating Torque, in.-oz. | Increment | Steps per Second | Smallest Step Increment | DC Voltage | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base (A) | Feedback Type | Each | |
Motors With Sensor and Encoder | |||||||||||||||
NEMA 23 | |||||||||||||||
| 750 | 20 | 1.8° | 2,500 | 0.007° | 12-40 | 2.8 | 5 1/8" | 2 1/4" | 2 1/4" | 1/4" | 3/4" | 1.13" | Closed Loop | 00000000 | 0000000 |
| 1,500 | 21 | 1.8° | 2,600 | 0.007° | 12-40 | 2.8 | 3 3/4" | 2 1/4" | 2 1/4" | 1/4" | 3/4" | 1.13" | Closed Loop | 00000000 | 000000 |
| 2,160 | 18 | 1.8° | 7,200 | 0.007° | 12-40 | 4.2 | 4 1/4" | 2 1/4" | 2 1/4" | 1/4" | 3/4" | 1.13" | Closed Loop | 00000000 | 000000 |