Maximum Speed Maximum Speed |
---|
Motor Frame Size Motor Frame Size | Show |
---|
|
Motor Frame Size Motor Frame Size | Hide |
---|
Motor Enclosure Type Motor Enclosure Type |
---|
|
Mounting Orientation Mounting Orientation |
---|
|
Shaft Diameter Shaft Diameter |
---|
|
Full Load Current Full Load Current |
---|
Frequency Frequency |
---|
|
Starting Torque Starting Torque |
---|
|
Direction of Operation Direction of Operation |
---|
|
Shaft Type Shaft Type |
---|
|
Enclosure Material Enclosure Material |
---|
|
Peak Torque Peak Torque |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Electric Motors
When replacing a motor, use the information on your motor’s nameplate to guide your selection.
More
Face-Mount AC Motors





Also known as C-face motors, these bolt directly to your equipment at any angle. They're rated for continuous duty and have a keyed shaft that comes with key stock. You can wire for clockwise or counterclockwise rotation; instructions are included.
To use a motor with a variable frequency drive (AC motor speed control), choose a three-phase motor that’s inverter rated.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | Insulation | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Max. Speed, rpm | Full Load Current, A | Inverter Rated | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max. Temp., ° F | Each | |
115/208-230 Volts AC, Single Phase | ||||||||||||||
NEMA 56C | ||||||||||||||
1/4 | 1,725 | 2.6/1.9-1.3 | No | Open Dripproof (ODP) | 12" | 8 1/4" | 8 1/4" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 0000000 |
1/4 | 1,725 | 5/3-2.5 | No | Totally Enclosed Fan Cooled (TEFC) | 11 1/2" | 8 1/2" | 7 1/2" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1/3 | 1,725 | 6/3.6-3 | No | Totally Enclosed Fan Cooled (TEFC) | 11 1/2" | 8 1/2" | 7 1/2" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1/3 | 1,740 | 3.4/2.5-1.7 | No | Open Dripproof (ODP) | 12" | 8 1/4" | 8 1/4" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1/3 | 3,450 | 6/3.2-3 | No | Totally Enclosed Fan Cooled (TEFC) | 11 1/2" | 8 1/2" | 7 1/2" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1/2 | 1,725 | 4.7/3.2-2.35 | No | Open Dripproof (ODP) | 12 3/4" | 8 1/4" | 8 1/4" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1/2 | 1,725 | 7.4/4.3-3.7 | No | Totally Enclosed Fan Cooled (TEFC) | 12" | 8 1/2" | 7 1/2" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1/2 | 3,450 | 7/4.1-3.5 | No | Totally Enclosed Fan Cooled (TEFC) | 11 1/2" | 8 1/2" | 8 1/4" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
3/4 | 1,725 | 8.4/4.4-4.2 | No | Totally Enclosed Fan Cooled (TEFC) | 12 1/2" | 8 1/2" | 8 1/4" | 5/8" | 1 7/8" | 3" | F | 311° | 00000000 | 000000 |
3/4 | 3,450 | 9.6/6.1-4.8 | No | Totally Enclosed Fan Cooled (TEFC) | 12" | 8 1/2" | 8 1/4" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1 | 1,725 | 12.8/7-6.4 | No | Totally Enclosed Fan Cooled (TEFC) | 13 1/4" | 9 1/2" | 9 1/4" | 5/8" | 1 7/8" | 3 5/8" | F | 311° | 00000000 | 000000 |
1 | 3,450 | 11.8/6.1-5.9 | No | Totally Enclosed Fan Cooled (TEFC) | 12 1/4" | 9 1/2" | 9 1/4" | 5/8" | 1 7/8" | 3 5/8" | B | 266° | 00000000 | 000000 |
1 1/2 | 1,725 | 12.4/6.8-6.2 | No | Totally Enclosed Fan Cooled (TEFC) | 14 1/4" | 9 1/2" | 9" | 5/8" | 1 7/8" | 3 3/8" | F | 311° | 00000000 | 000000 |
1 1/2 | 3,450 | 16/8.4-8 | No | Totally Enclosed Fan Cooled (TEFC) | 13 1/4" | 9 1/2" | 9 1/4" | 5/8" | 1 7/8" | 3 5/8" | B | 266° | 00000000 | 000000 |
2 | 3,450 | 23/12-11.5 | No | Totally Enclosed Fan Cooled (TEFC) | 14 1/4" | 9 1/2" | 9 1/4" | 5/8" | 1 7/8" | 3 5/8" | F | 311° | 00000000 | 000000 |
115/230 Volts AC, Single Phase | ||||||||||||||
NEMA 56C | ||||||||||||||
1/2 | 3,450 | 4.9/2.5 | No | Open Dripproof (ODP) | 12" | 8 1/4" | 8 1/4" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1 | 1,750 | 8.4/4.2 | No | Open Dripproof (ODP) | 13 1/4" | 9 1/4" | 9" | 5/8" | 1 7/8" | 3 3/8" | F | 311° | 00000000 | 000000 |
208-230/460 Volts AC, Three Phase | ||||||||||||||
NEMA 56C | ||||||||||||||
1/4 | 1,735 | 1.2-1.1/0.6 | No | Totally Enclosed Fan Cooled (TEFC) | 11 1/2" | 8 1/2" | 6" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1/3 | 1,725 | 1.5-1.4/0.7 | No | Totally Enclosed Nonventilated (TENV) | 10 1/4" | 8 1/4" | 6" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1/3 | 1,725 | 1.7-1.4/0.7 | No | Open Dripproof (ODP) | 11 1/4" | 8 1/4" | 6 1/4" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1/2 | 1,720 | 1.7-1.6/0.8 | No | Totally Enclosed Nonventilated (TENV) | 10 1/4" | 8 1/4" | 6" | 5/8" | 1 7/8" | 3" | F | 311° | 00000000 | 000000 |
1/2 | 1,725 | 1.7-1.6/0.8 | No | Open Dripproof (ODP) | 12 3/4" | 8 1/4" | 6 1/4" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1/2 | 3,450 | 1.9-1.6/0.8 | No | Open Dripproof (ODP) | 11 1/4" | 8 1/4" | 6 1/4" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
3/4 | 1,725 | 3.2-3/1.5 | No | Totally Enclosed Fan Cooled (TEFC) | 11 1/2" | 8 1/2" | 6" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
3/4 | 1,730 | 2.1-2/1 | No | Open Dripproof (ODP) | 12 1/4" | 9 1/4" | 7" | 5/8" | 1 7/8" | 3 3/8" | F | 311° | 00000000 | 000000 |
3/4 | 3,450 | 3.1-2.6/1.3 | No | Totally Enclosed Fan Cooled (TEFC) | 11 1/2" | 8 1/2" | 6" | 5/8" | 1 7/8" | 3" | B | 266° | 00000000 | 000000 |
1 | 1,750 | 3-2.9/1.45 | No | Open Dripproof (ODP) | 12 1/4" | 9 1/4" | 7" | 5/8" | 1 7/8" | 3 3/8" | F | 311° | 00000000 | 000000 |
1 | 1,760 | 3.1-3/1.5 | No | Totally Enclosed Fan Cooled (TEFC) | 12 1/4" | 8 7/8" | 6 7/8" | 5/8" | 1 7/8" | 3 1/4" | F | 311° | 00000000 | 000000 |
1 | 3,450 | 3-2.8/1.4 | No | Totally Enclosed Fan Cooled (TEFC) | 12 1/4" | 8 7/8" | 6 7/8" | 5/8" | 1 7/8" | 3 1/4" | F | 311° | 00000000 | 000000 |
1 1/2 | 1,760 | 4.5-4.4/2.2 | Yes | Totally Enclosed Fan Cooled (TEFC) | 13 1/4" | 8 7/8" | 7 1/4" | 5/8" | 1 7/8" | 3 5/8" | F | 311° | 00000000 | 000000 |
1 1/2 | 3,500 | 4-3.8/1.9 | No | Totally Enclosed Fan Cooled (TEFC) | 12 1/4" | 8 7/8" | 6 7/8" | 5/8" | 1 7/8" | 3 1/4" | F | 311° | 00000000 | 000000 |
2 | 1,760 | 6.6-5.8/2.9 | Yes | Totally Enclosed Fan Cooled (TEFC) | 13 1/4" | 8 7/8" | 7 1/4" | 5/8" | 1 7/8" | 3 5/8" | F | 311° | 00000000 | 00000000 |
2 | 3,490 | 5.3-5/2.5 | No | Totally Enclosed Fan Cooled (TEFC) | 13 1/4" | 8 7/8" | 6 7/8" | 5/8" | 1 7/8" | 3 1/4" | F | 311° | 00000000 | 000000 |
Base/Face-Mount AC Motors


Select a motor that fits many applications—these mount from the base or face and at any angle. They're rated for continuous duty and have a keyed shaft that includes key stock. Wire for clockwise or counterclockwise rotation; instructions are included.
Choose a three-phase motor, which is inverter rated, if you want to use a variable frequency drive (AC motor speed control).
Washdown motors have an epoxy-coated enclosure, neoprene rubber gaskets, and removable drain plugs. They meet IP55 for protection from water projected from a nozzle.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | Insulation | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Max. Speed, rpm | Full Load Current, A | Inverter Rated | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base (A) | Base Type | Class | Max. Temp., ° F | Environmental Rating | Each | |
115/208-230 Volts AC, Single Phase | ||||||||||||||||
General Purpose NEMA 56C | ||||||||||||||||
1/3 | 1,725 | 6/3.6-3 | No | Totally Enclosed Fan Cooled (TEFC) | 11 1/2" | 8 1/2" | 8" | 5/8" | 1 7/8" | 3 1/2" | Welded | B | 266° | __ | 00000000 | 0000000 |
1/2 | 1,725 | 7.4/4.3-3.7 | No | Totally Enclosed Fan Cooled (TEFC) | 12" | 8 1/2" | 8" | 5/8" | 1 7/8" | 3 1/2" | Welded | B | 266° | __ | 00000000 | 000000 |
1/2 | 3,450 | 7/4.1-3.5 | No | Totally Enclosed Fan Cooled (TEFC) | 11 1/2" | 8 1/2" | 8 3/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | B | 266° | __ | 00000000 | 000000 |
3/4 | 1,725 | 8.4/5.4-4.2 | No | Totally Enclosed Fan Cooled (TEFC) | 12 1/2" | 8 1/2" | 8 3/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | __ | 00000000 | 000000 |
1 | 1,725 | 12.8/7-6.4 | No | Totally Enclosed Fan Cooled (TEFC) | 13 1/4" | 9 1/2" | 9 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | __ | 00000000 | 000000 |
1 | 3,450 | 11.8/6.1-5.9 | No | Totally Enclosed Fan Cooled (TEFC) | 12 1/4" | 9 1/2" | 9 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | B | 266° | __ | 00000000 | 000000 |
1 1/2 | 3,450 | 15/7.9-7.5 | No | Totally Enclosed Fan Cooled (TEFC) | 13 1/4" | 9 1/2" | 9 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | __ | 00000000 | 000000 |
Washdown NEMA 56C | ||||||||||||||||
1/2 | 1,725 | 7.4/4.1-3.7 | No | Totally Enclosed Fan Cooled (TEFC) | 12 1/4" | 9 1/2" | 9 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | IP55 | 00000000 | 000000 |
3/4 | 1,725 | 11/7-5.5 | No | Totally Enclosed Fan Cooled (TEFC) | 12 1/4" | 9 1/2" | 9 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | IP55 | 00000000 | 000000 |
1 | 1,725 | 12.8/7-6.4 | No | Totally Enclosed Fan Cooled (TEFC) | 13 1/4" | 9 1/2" | 9 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | IP55 | 00000000 | 00000000 |
1 1/2 | 1,725 | 12.4/6.8-6.2 | No | Totally Enclosed Fan Cooled (TEFC) | 14 1/4" | 9 1/2" | 9 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | IP55 | 00000000 | 00000000 |
208-230/460 Volts AC, Three Phase | ||||||||||||||||
General Purpose NEMA 56C | ||||||||||||||||
1/3 | 1,725 | 1.9-1.6/0.8 | Yes | Totally Enclosed Fan Cooled (TEFC) | 11 1/2" | 8 1/2" | 6 3/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | B | 266° | __ | 00000000 | 000000 |
3/4 | 1,725 | 3.2-3/1.5 | Yes | Totally Enclosed Fan Cooled (TEFC) | 11 1/2" | 8 1/2" | 6 3/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | B | 266° | __ | 00000000 | 000000 |
1 | 1,760 | 3.1-3/1.5 | Yes | Totally Enclosed Fan Cooled (TEFC) | 12 1/4" | 9 1/4" | 7 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | __ | 00000000 | 000000 |
Washdown NEMA 56C | ||||||||||||||||
1/2 | 1,740 | 1.8-1.6/0.8 | Yes | Totally Enclosed Nonventilated (TENV) | 11 1/4" | 9 1/4" | 7 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | IP55 | 00000000 | 000000 |
3/4 | 1,750 | 3-2.8/1.4 | Yes | Totally Enclosed Nonventilated (TENV) | 11 1/4" | 9 1/4" | 7 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | IP55 | 00000000 | 000000 |
1 | 1,745 | 3-2.9/1.5 | Yes | Totally Enclosed Nonventilated (TENV) | 12 1/4" | 9 1/4" | 7 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | IP55 | 00000000 | 00000000 |
2 | 1,755 | 6-5.8/2.9 | Yes | Totally Enclosed Fan Cooled (TEFC) | 14 1/4" | 9 1/2" | 7 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | IP55 | 00000000 | 00000000 |
230/460 Volts AC, Three Phase | ||||||||||||||||
General Purpose NEMA 56C | ||||||||||||||||
1/2 | 1,740 | 1.6 | Yes | Totally Enclosed Nonventilated (TENV) | 11 1/4" | 9 1/4" | 7 1/4" | 5/8" | 1 7/8" | 3 1/2" | Welded | F | 311° | __ | 00000000 | 000000 |
Sanitary Washdown Face-Mount AC Motors




Bolt these motors directly to conveyors, pumps, and other equipment to keep things moving in sanitary environments. They’re also known as C-face motors. Rated IP69, they hold up to the washdowns that are often required in food-safe areas. These face-mount motors are designed without feet, so it’s easy to clean the entire motor body. For extra protection from washdowns, the interior of the motor is completely lined with epoxy resin. A two-barrier shaft seal prevents liquids from entering the motor through the shaft. They also have a face-mount drain to allow liquids to escape from the face cavity, so they don’t linger there and stagnate.
Made of 304 stainless steel, these motors stand up to frequent washdowns with harsh cleaners without rusting. They have rounded edges and smooth surfaces so that there are no crevices where bacteria can grow. A laser-marked nameplate gives you permanent identification information without any bolts, engravings, or adhesive labels that can trap contaminants.
These motors are rated for continuous duty, so you can run equipment that never goes offline. They're also inverter rated, which means you can use them with variable frequency drives, or VFDs, to run them at different speeds for different tasks.
TEFC (totally enclosed fan cooled) motors have an external fan that blows air over the outside housing for cooling. TENV (totally enclosed nonventilated) motors do not require a fan or other ventilation. This type of body has fewer areas where water and contaminants can enter than TEFC motors.
Motors with a rotatable conduit box eliminate the need to reroute power during installation. The conduit box rotates 360° (90° at a time) so you can connect conduit from any side.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | Insulation | Torque @ 460V AC | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Max. Speed, rpm | Full Load Current, A | Inverter Rated | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Shaft Type | Class | Max. Temp., °F | Starting Torque, in.-lbs. | Continuous Operating Torque, in.-lbs. | Environmental Rating | Each | |
208-230/460 Volts AC, Three Phase | |||||||||||||||||
NEMA 56C—Totally Enclosed Fan Cooled (TEFC) with Rotatable Conduit Box | |||||||||||||||||
1/2 | 1,800 | 1.8/0.9 | Yes | 13" | 9 7/8" | 6 1/2" | 5/8" | 1 7/8" | 3 1/4" | Keyed | H | 221° | 61 | 17.8 | IP69 | 0000000 | 000000000 |
3/4 | 1,800 | 2.6/1.3 | Yes | 14" | 9 7/8" | 6 1/2" | 5/8" | 1 7/8" | 3 1/4" | Keyed | H | 221° | 96.1 | 26.8 | IP69 | 0000000 | 00000000 |
NEMA 56C—Totally Enclosed Nonventilated (TENV) with Rotatable Conduit Box | |||||||||||||||||
3/4 | 3,600 | 2.1-2/1 | Yes | 11 3/4" | 9 7/8" | 6 1/2" | 5/8" | 1 7/8" | 3 1/4" | Keyed | H | 221° | 56.8 | 13.5 | IP69 | 0000000 | 00000000 |
1 | 3,600 | 2.9-2.8/1.4 | Yes | 11 3/4" | 9 7/8" | 6 1/2" | 5/8" | 1 7/8" | 3 1/4" | Keyed | H | 221° | 96.1 | 18.2 | IP69 | 0000000 | 00000000 |
230/460 Volts AC, Three Phase | |||||||||||||||||
NEMA 56C—Totally Enclosed Fan Cooled (TEFC) with Rotatable Conduit Box | |||||||||||||||||
2 | 1,800 | 5.6/2.8 | Yes | 14" | 9 7/8" | 6 1/2" | 5/8" | 2" | 3 1/4" | Keyed | H | 221° | 208 | 72.1 | IP69 | 0000000 | 00000000 |
NEMA 56C—Totally Enclosed Nonventilated (TENV) with Rotatable Conduit Box | |||||||||||||||||
1 1/2 | 3,600 | 3.6/1.8 | Yes | 13 3/4" | 9 7/8" | 6 1/2" | 5/8" | 2" | 3 1/4" | Keyed | H | 221° | 122.4 | 27.7 | IP69 | 0000000 | 00000000 |
2 | 3,600 | 4.8/2.4 | Yes | 15" | 9 7/8" | 6 1/2" | 5/8" | 2" | 3 1/4" | Keyed | H | 221° | 165.6 | 35.8 | IP69 | 0000000 | 00000000 |
Sanitary Washdown Base/Face-Mount AC Motors




For the most mounting versatility in sanitary and washdown environments, these motors mount in two ways. Bolt them down through their feet, or face-mount them directly to your conveyor, pump, or other machine. They have an IP69 rating, so they'll hold up to the high-pressure, high-temperature cleaning cycles common in food-processing and other sanitary environments. A two-barrier seal keep liquids from entering through the motor shaft, and an epoxy resin coating protects the interior. Holes on the face of the motor drain any liquid that finds its way into the mounting cavity.
Made of 304 stainless steel, these motors stand up to frequent washdowns with harsh cleaners without rusting. Critical for sanitary environments, these motors reduce the chances of foodborne illnesses by making thorough cleaning possible. Smooth contours, continuous welds, and a laser-marked nameplate with no bolts or labels give bacteria no place to hide.
Designed for industrial food processing lines that never go offline, these motors can run continuously. They're also inverter rated, which means you can use them with variable frequency drives, or VFDs, to run them at different speeds for different tasks. The motor's conduit connection rotates 360° (90° at a time) so you won't have to reroute your power supply.
TEFC (totally enclosed fan cooled) motors have an external fan that blows air over the outside housing for cooling. TENV (totally enclosed nonventilated) motors do not require a fan or other ventilation. This type of body has fewer areas where water and contaminants can enter than TEFC motors.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | Insulation | Torque @ 460V AC | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Max. Speed, rpm | Full Load Current, A | Inverter Rated | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Shaft Type | Class | Max. Temp., °F | Starting Torque, in.-lbs. | Continuous Operating Torque, in.-lbs. | Environmental Rating | Each | |
208-230/460 Volts AC, Three Phase | |||||||||||||||||
NEMA 56C—Totally Enclosed Nonventilated (TENV) | |||||||||||||||||
1/2 | 1,800 | 1.8/0.9 | Yes | 11 3/4" | 9 3/4" | 6 3/4" | 5/8" | 2" | 3 1/2" | Keyed | H | 221° | 61.1 | 17.9 | IP69 | 0000000 | 000000000 |
3/4 | 1,800 | 2.6/1.3 | Yes | 12 3/4" | 9 3/4" | 6 3/4" | 5/8" | 2" | 3 1/2" | Keyed | H | 221° | 97.2 | 26.9 | IP69 | 0000000 | 00000000 |
230/460 Volts AC, Three Phase | |||||||||||||||||
NEMA 56C—Totally Enclosed Fan Cooled (TEFC) | |||||||||||||||||
2 | 3,600 | 5/2.5 | Yes | 14 7/8" | 9 3/4" | 6 3/4" | 5/8" | 2" | 3 1/2" | Keyed | H | 221° | 165.6 | 35.9 | IP69 | 0000000 | 00000000 |
NEMA 56C—Totally Enclosed Nonventilated (TENV) | |||||||||||||||||
1 | 1,800 | 3/1.5 | Yes | 12 3/4" | 9 3/4" | 6 3/4" | 5/8" | 2" | 3 1/2" | Keyed | H | 221° | 114 | 36 | IP69 | 0000000 | 00000000 |
1 1/2 | 3,600 | 3.6/1.8 | Yes | 13 5/8" | 9 3/4" | 6 3/4" | 5/8" | 2" | 3 1/2" | Keyed | H | 221° | 122.4 | 27.7 | IP69 | 0000000 | 00000000 |
Base/Face-Mount DC Motors
With two location options for any-angle mounting, you can put these motors to work in a variety of equipment configurations. Motors are rated for continuous duty and have a keyed shaft that comes with key stock. Wire for clockwise or counterclockwise rotation; instructions are included.
Use a motor speed control (not included) to adjust motor speed. Use an AC to DC transformer (not included) to convert AC power to DC power.
For technical drawings and 3-D models, click on a part number.




Overall | Shaft | Insulation | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Speed @ Continuous Operating Torque | Max. Speed, rpm | Starting Torque, in.-lbs. | Full Load Current, A | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Base Type | Class | Max. Temp., ° F | Each | |
90V DC | ||||||||||||||||
NEMA 56C | ||||||||||||||||
1/4 | 1,750 rpm @ 9 in.-lbs. | 1,863 | 89.33 | 2.5 | Totally Enclosed Nonventilated (TENV) | 12 1/4" | 6 1/2" | 8 3/4" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 0000000 |
1/3 | 1,750 rpm @ 12 in.-lbs. | 1,783 | 144.3 | 3.2 | Totally Enclosed Nonventilated (TENV) | 13 1/4" | 6 1/2" | 8 3/4" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 000000 |
1/2 | 1,750 rpm @ 18 in.-lbs. | 1,853 | 150.92 | 4.8 | Totally Enclosed Nonventilated (TENV) | 15" | 6 1/2" | 8 3/4" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 000000 |
1/2 | 2,500 rpm @ 12.6 in.-lbs. | 2,526 | 343.88 | 5 | Totally Enclosed Nonventilated (TENV) | 13 1/4" | 6 1/2" | 8 1/4" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 000000 |
3/4 | 1,750 rpm @ 27 in.-lbs. | 1,935 | 236.9 | 7.6 | Totally Enclosed Fan Cooled (TEFC) | 14 3/4" | 6 3/4" | 7 1/2" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 00000000 |
1 | 1,750 rpm @ 36 in.-lbs. | 1,853 | 528.4 | 10 | Totally Enclosed Fan Cooled (TEFC) | 15 1/2" | 6 3/4" | 7 1/2" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 00000000 |
1 | 2,500 rpm @ 25.2 in.-lbs. | 2,699 | 490.2 | 9.7 | Totally Enclosed Fan Cooled (TEFC) | 14 3/4" | 6 3/4" | 7 1/2" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 00000000 |
180V DC | ||||||||||||||||
NEMA 56C | ||||||||||||||||
1/4 | 1,750 rpm @ 9 in.-lbs. | 1,830 | 103.3 | 1.3 | Totally Enclosed Nonventilated (TENV) | 12 1/4" | 6 1/2" | 8 3/4" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 000000 |
1/3 | 1,750 rpm @ 15.2 in.-lbs. | 1,800 | 285.9 | 1.6 | Totally Enclosed Nonventilated (TENV) | 13 1/4" | 6 1/2" | 8 3/4" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 000000 |
1/2 | 1,750 rpm @ 18 in.-lbs. | 1,880 | 509.2 | 2.5 | Totally Enclosed Nonventilated (TENV) | 15" | 6 1/2" | 8 3/4" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 000000 |
3/4 | 1,750 rpm @ 27 in.-lbs. | 1,985 | 350.3 | 3.7 | Totally Enclosed Fan Cooled (TEFC) | 14 3/4" | 6 3/4" | 7 1/2" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 00000000 |
1 | 1,750 rpm @ 36.6 in.-lbs. | 1,870 | 485.6 | 5 | Totally Enclosed Fan Cooled (TEFC) | 15 1/2" | 6 3/4" | 7 1/2" | 5/8" | 1 7/8" | 3 1/2" | Removable | F | 311° | 0000000 | 00000000 |

Air-Powered Face-Mount Motors with NEMA Frame
A safe alternative to electric motors for use in harsh environments, air-powered motors are spark-free and remain cool, even under continuous load. They come with a muffler to reduce noise and filter exhaust air.
Motors with reversible shaft rotation can be set to turn clockwise or counterclockwise; instructions are included.
For technical drawings and 3-D models, click on a part number.





@ Max. Speed | Overall | Shaft | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Torque, in.-lbs. | Max. Speed @ Max. Pressure, rpm | Max. Pressure, psi | Max. Air Consumption, cfm | Noise Level, dB | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base (A) | Type | Direction of Operation | Pipe Size | Each | |
Face Mount | ||||||||||||||||
0.42 | 14 | 2,000 | 80 | 30 | 84 | 6 3/4" | 6 1/2" | 7 3/4" | 5/8" | 2.06" | 3 1/4" | Keyed | Clockwise | 1/4 | 00000000 | 0000000 |
0.42 | 14 | 2,000 | 80 | 30 | 84 | 6 3/4" | 6 1/2" | 7 3/4" | 5/8" | 2.06" | 3 1/4" | Keyed | Counterclockwise | 1/4 | 00000000 | 000000 |
0.95 | 20 | 3,000 | 100 | 30 | 76 | 5 3/4" | 6 1/2" | 7" | 5/8" | 2.06" | 3 1/4" | Keyed | Counterclockwise | 1/4 | 00000000 | 000000 |
1.7 | 36 | 3,000 | 100 | 78 | 87 | 6 3/4" | 6 1/2" | 7" | 5/8" | 2.06" | 3 1/4" | Keyed | Clockwise or Counterclockwise | 1/4 | 00000000 | 000000 |
4 | 84 | 3,000 | 100 | 128 | 90 | 8 1/4" | 6 1/2" | 8" | 5/8" | 2.06" | 3 1/4" | Keyed | Clockwise or Counterclockwise | 1/2 | 00000000 | 000000 |