Voltage Voltage | Show |
|---|
|
Voltage Voltage | Hide |
|---|
Power Power |
|---|
|
Mounting Orientation Mounting Orientation |
|---|
|
Motor Type Motor Type |
|---|
|
Torque @ Maximum Speed Torque @ Maximum Speed |
|---|
|
Power Source Power Source |
|---|
|
Mounting Style Mounting Style |
|---|
|
Electrical Connection Type Electrical Connection Type |
|---|
|
Starting Torque Starting Torque |
|---|
|
Direction of Operation Direction of Operation |
|---|
|
Motor Enclosure Type Motor Enclosure Type |
|---|
|
Shaft Type Shaft Type |
|---|
|
Specifications Met Specifications Met |
|---|
|
About Electric Motors
When replacing a motor, use the information on your motor’s nameplate to guide your selection.
More
Speed-Control Motors
 Motor |  Control Face |  |
 |
Maintain speed automatically. These motors come with a speed control with a feedback sensor that adjusts power to maintain your set speed. They combine the speed control characteristics of permanent magnet brushless DC motors with the convenience of AC power—an integrated inverter means they operate on 120 volts AC.
Motors are rated for continuous duty and mount at any angle. Shaft is keyed and comes with key stock. Use the switch on the speed control to set clockwise or counterclockwise rotation.
All have manual overload protection—an LED on the speed control indicates when the overload protection is triggered; use the switch to reset. Control also has an on/off switch and a speed adjustment knob. Panel mount the control up to 10 feet from the motor—it comes with a 10-ft. cable for connection.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | For Panel Cutout | Insulation | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power, hp | Max. Speed, rpm | Starting Torque, in.-lbs. | Torque @ Max. Speed, in.-lbs. | Full Load Current, A | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base (A) | Wd. | Ht. | Class | Max. Temp., ° F | Each | |
NEMA 34 | |||||||||||||||||
| 1/5 | 1,750 | 8.1 | 8.1 | 2 | Totally Enclosed Nonventilated (TENV) | 7 1/2" | 4" | 4 1/4" | 1/2" | 1.21" | 1.93" | 4" | 2 7/8" | B | 266° | 000000 | 0000000 |
| 1/3 | 1,750 | 13.4 | 13.4 | 8 | Totally Enclosed Nonventilated (TENV) | 8 1/2" | 4" | 4 1/4" | 1/2" | 1.21" | 1.93" | 4" | 2 7/8" | B | 266° | 000000 | 00000000 |
| 1/3 | 3,450 | 6.5 | 6.5 | 4 | Totally Enclosed Nonventilated (TENV) | 7 1/2" | 4" | 4 1/4" | 1/2" | 1.21" | 1.93" | 4" | 2 7/8" | B | 266° | 000000 | 00000000 |
Fan-Motor Kits for Refrigeration Equipment
Everything you need to replace a fan motor on refrigeration units, appliances, and blowers.
Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Fan Blade Dia. Included | Airflow, cfm | Motor Speed, rpm | No. of Speeds | Dia. | Lg. | Current, A | Includes | Specifications Met | Each | |
120V AC Single Phase, 60Hz—Wire Leads | ||||||||||
| 3 1/2", 4" | 100 | 3,000 | 1 | 3/16" | 1 3/8" | 0.5 | One Reversible Motor, Two Adjustable H Mounting Brackets, Two Fan Blades | UL Recognized | 0000000 | 000000 |
| 4", 5 1/2" | 200 | 3,000 | 1 | 3/16" | 1 3/8" | 0.5 | One Reversible Motor, Two Adjustable H Mounting Brackets, Two Fan Blades | UL Recognized | 0000000 | 00000 |
| 4", 5 1/2" | 200 | 3,000 | 2 | 3/16" | 1 3/8" | 0.4 | One Reversible Motor, Two Adjustable H Mounting Brackets, Two Fan Blades | UL Recognized | 0000000 | 00000 |
| 4", 5 1/2", 5 9/16" | 200 | 3,000 | 1 | 3/16" | 1 3/8" | 0.5 | One Reversible Motor, Two Adjustable H Mounting Brackets, Three Fan Blades | UL Recognized | 0000000 | 00000 |
Pedestal Fan Motors
Build your own fan or replace a fan motor. Mount one of these motors directly to a fan column. Four 8-32 threaded mounting studs extend 1" for mounting a fan guard.
View information about motors.
Note: When selecting a fan blade, be sure the rpm and hp are compatible and the shaft diameter of the blade matches the shaft diameter of the motor.
For technical drawings and 3-D models, click on a part number.
Shaft | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motor Speed, rpm | Power, hp | Dia. | Lg. | Current, A | Lg. | Ht. | Wd. | Direction of Operation | Service Factor | Mount. Fasteners Included | Mount. Hole Dia. | Features | Specifications Met | Each | |
NEMA 48YZ | |||||||||||||||
120V AC, Single Phase—Hardwire | |||||||||||||||
| 1,075 | 1/4 | 1/2" | 2 3/8" | 2.9 | 10 11/16" | 10 3/8" | 5 11/16" | Clockwise or Counterclockwise | 1.0 | No | 7/16" | Thermal Overload Protection | CSA Certified, UL Recognized | 0000000 | 0000000 |
| 1,075 | 1/3 | 1/2" | 2 3/8" | 3.8 | 10 11/16" | 10 3/8" | 5 11/16" | Clockwise or Counterclockwise | 1.0 | No | 7/16" | Thermal Overload Protection | CSA Certified, UL Recognized | 0000000 | 000000 |
| 1,075 | 1/2 | 1/2" | 2 3/8" | 5.5 | 11 5/16" | 10 3/8" | 5 11/16" | Clockwise or Counterclockwise | 1.0 | No | 7/16" | Thermal Overload Protection | CSA Certified, UL Recognized | 0000000 | 000000 |
| 1,625 | 1/4 | 1/2" | 2 3/8" | 2.6 | 10 11/16" | 10 3/8" | 5 11/16" | Clockwise or Counterclockwise | 1.0 | No | 7/16" | Thermal Overload Protection | CSA Certified, UL Recognized | 0000000 | 000000 |
| 1,625 | 1/3 | 1/2" | 2 3/8" | 3.4 | 10 11/16" | 10 3/8" | 5 11/16" | Clockwise or Counterclockwise | 1.0 | No | 7/16" | Thermal Overload Protection | CSA Certified, UL Recognized | 0000000 | 000000 |
| 1,625 | 1/2 | 1/2" | 2 3/8" | 5.1 | 10 11/16" | 10 3/8" | 5 11/16" | Clockwise or Counterclockwise | 1.0 | No | 7/16" | Thermal Overload Protection | CSA Certified, UL Recognized | 0000000 | 000000 |
NEMA 56YZ | |||||||||||||||
120V AC, Single Phase—Hardwire | |||||||||||||||
| 1,625 | 1/3 | 5/8" | 2 3/8" | 3.4 | 10 11/16" | 10 3/8" | 5 11/16" | Clockwise or Counterclockwise | 1.0 | No | 7/16" | Thermal Overload Protection | CSA Certified, UL Recognized | 0000000 | 000000 |
| 1,625 | 1/2 | 5/8" | 2 3/8" | 5.1 | 10 11/16" | 10 3/8" | 5 11/16" | Clockwise or Counterclockwise | 1.0 | No | 7/16" | Thermal Overload Protection | CSA Certified, UL Recognized | 0000000 | 000000 |
Jancy Magnetic-Base Drills for Hollow-Core Cutters
These drills work with hollow-core cutters to cut only on the periphery of the hole and produce a solid slug. This allows for a faster and easier cut than drilling with standard drill bits. Also known as magnetic core drilling machines.
They have a feed handle that mounts on the left or right side of the drill. The electromagnetic base attaches to flat ferrous surfaces (such as steel and cast iron).These drills also have a valve to adjust coolant flow. Holding force (also called drill-point breakaway) is calculated against a 1" thick steel plate.
Chucks and adapters (sold separately) allow these models to accept standard drill bits.
O'all | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Cutter Dia. | For Cutter Shank Size | Max. Cutting Dp. | Spindle Travel | Max. No-Load Speed, rpm | No. of Speeds | Current, A | Holding Force, lbs. | For Min. Surface Thick. | Coolant Included | Lg. | Wd. | Ht. | Wt. | Manufacturer Model No. | Each | ||
120V AC | |||||||||||||||||
| A | 1 3/8" | 3/4" | 2" | 5 11/16" | 590 | 1 | 9.5 | 2,810 | 1/2" | No | 10 1/4" | 3 1/2" | 19 3/4" | 25.8 lbs./sq. ft. | JME Holemaker III | 0000000 | 0000000 |