Working Orientation Working Orientation |
|---|
|
Maximum Lift Maximum Lift |
|---|
|
|
Capacity Capacity |
|---|
|
Maximum Height Maximum Height |
|---|
Minimum Height Minimum Height |
|---|
|
Capacity @ Maximum Lift Capacity @ Maximum Lift |
|---|
|
Overall Height Overall Height |
|---|
|
|
|
Capacity @ Height Capacity @ Height |
|---|
|
Capacity @ Minimum Height Capacity @ Minimum Height |
|---|
|
Mounting Plate Shape Mounting Plate Shape |
|---|
|
|
Mounting Style Mounting Style |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Leveling Jacks
Mount these jacks to equipment to raise and level it.
Side Mount—Weld the included mount to equipment then attach the jack to the mount. A pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.
Through-Hole Mount—Mount jacks through a hole in the frame of equipment and fasten the mounting plate. Jacks with triangular plate can also be welded onto your equipment. They’re commonly used with an A-frame trailer coupler.
Jacks with foot plate have extra stability.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | O'all Ht. | Handle Lg. | Body Material | For Hole Dia. | No. of Holes | Fasteners Included | Hole Dia. | Hole Lg. | Hole Wd. | Features | Each | ||
Side Mount with Rectangular Mounting Plate | ||||||||||||||||
Side Handle | ||||||||||||||||
| A | 1 | 2,000 | 10 7/8"-20 7/8" | 10" | 22 3/4" | 5 7/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 0000000 |
| A | 2 1/2 | 5,000 | 10 3/8"-20 3/8" | 10" | 22 7/8" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| A | 2 1/2 | 5,000 | 15 3/8"-30 3/8" | 15" | 27 7/8" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Top Handle | ||||||||||||||||
| A | 1 | 2,000 | 11"-21" | 10" | 17 7/8" | 7 5/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| A | 2 1/2 | 5,000 | 14 1/2"-29 1/2" | 15" | 27 1/2" | 7 5/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Side Mount with Square Mounting Plate | ||||||||||||||||
Side Handle | ||||||||||||||||
| A | 1 | 2,000 | 15"-30 1/2" | 15 1/2" | 32 3/4" | 6 1/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Top Handle | ||||||||||||||||
| A | 1 | 2,000 | 14 3/4"-29 3/4" | 15" | 30" | 6" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 00000 |
Side Mount with Tube Mounting Plate | ||||||||||||||||
Side Handle | ||||||||||||||||
| B | 1 | 2,000 | 10 7/8"-20 7/8" | 10" | 23" | 5 7/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 1 | 2,000 | 15"-30 1/2" | 15 1/2" | 32 3/4" | 6 1/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 2 1/2 | 5,000 | 10 1/2"-20 1/2" | 10" | 23" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 2 1/2 | 5,000 | 15 1/2"-30 1/2" | 15" | 28" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 3 1/2 | 7,000 | 11"-21" | 10" | 25 5/8" | 8 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 5 | 10,000 | 17"-29 5/8" | 12 5/8" | 39 1/2" | 13 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Top Handle | ||||||||||||||||
| B | 1 | 2,000 | 16"-31" | 15" | 22 7/8" | 7 5/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 2 1/2 | 5,000 | 11 1/4"-21 1/4" | 10" | 18" | 7 5/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 2 1/2 | 5,000 | 15 3/8"-30 3/8" | 15" | 23 3/8" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Through-Hole Mount with Triangular Mounting Plate | ||||||||||||||||
Top Handle | ||||||||||||||||
| C | 2 1/2 | 5,000 | 10 1/8"-25 1/8" | 15" | 24 1/8" | 7 5/8" | Steel | 2 1/4" | 3 | No | __ | 7/16" | 13/16" | Foot Plate | 0000000 | 00000 |
| D | 2 1/2 | 5,000 | 10 7/8"-25 7/8" | 15" | 24 3/8" | 7 5/8" | Steel | 2 1/4" | 3 | No | __ | 7/16" | 13/16" | __ | 0000000 | 00000 |
Through-Hole Mount with Round Mounting Plate | ||||||||||||||||
Top Handle | ||||||||||||||||
| E | 2 1/2 | 5,000 | 4 1/2"-13 1/2" | 9" | 19 3/4" | 8 3/4" | Steel | 1 1/4" | 6 | No | 1/4" | __ | __ | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 000000 |
| E | 2 1/2 | 5,000 | 4 1/2"-21 1/2" | 17" | 27 3/4" | 8 7/8" | Steel | 1 1/4" | 6 | No | 1/4" | __ | __ | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 000000 |
| E | 2 1/2 | 5,000 | 4 1/2"-25 1/2" | 21" | 31 3/4" | 8 3/4" | Steel | 1 1/4" | 6 | No | 1/4" | __ | __ | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 000000 |
Leveling Jacks with Wheel
Mount these jacks to equipment to raise and level it. A swivel caster lets you reposition your load.
Side Mount—Slide the frame of your equipment through the mounting plate.
Through-Hole Mount—Mount through a hole in the frame of your equipment; mounting plate can be bolted or welded. These jacks are commonly used with an A-frame trailer coupler.
Locking pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | For Frame | Mounting | Mounting Plate | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | O'all Ht. | Ht. | Dp. | Handle Lg. | Body Material | For Hole Dia. | Fasteners Included | No. of Holes | Hole Lg. | Hole Wd. | Lg. | Wd. | Wheel Material | Each | ||
Side Mount | |||||||||||||||||||
| A | 1/4 | 750 | 7 1/2"-23 1/2" | 16" | 27 7/8" | 0"-5" | 1 7/8"-2 7/8" | 5 1/2" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 000000 | 0000000 |
| B | 1/2 | 1,000 | 10 13/16"-25 1/2" | 14 11/16" | 33 7/8" | 3"-5" | 2"-3" | 6 1/8" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
Side Mount with Locking Pin | |||||||||||||||||||
| C | 1/2 | 1,200 | 12 1/2"-22 1/2" | 10" | 28 1/8" | 2"-4" | 1 1/2"-3" | 6" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
| C | 3/4 | 1,500 | 12 7/8"-22 7/8" | 10" | 31 5/8" | 3"-5" | 2"-3" | 6 1/8" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
Through-Hole Mount | |||||||||||||||||||
| D | 1/2 | 1,200 | 8 5/8"-21 5/8" | 13" | 35 5/8" | __ | __ | 6 1/2" | Steel | 2 1/4" | No | 3 | 7/16" | 13/16" | 5 7/16" | 4 1/4" | __ | 0000000 | 000000 |
Scissor Jacks
Fit this compact jack under low-height loads.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4" Min. Ht. | Capacity @ 7" Ht. | Capacity @ 9" Max. Ht. | Saddle | Base | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1/8 | 250 | 1/4 | 675 | 1 1/2 | 3,000 | 4"-13" | 9" | 10 1/2" | 2" | 5 1/8" | 4 1/4" | 7 3/8" | 22" | Steel | No | 2 | 3/8" | 0000000 | 000000 |
Ratchet Jacks
These jacks can be used to lift, spread, push, pull, and clamp. The ratcheting action raises or lowers the load one notch at a time. For clamping, turn the top plate 90° and ratchet the jack to secure your workpiece.
Note: Jacks must be loaded with at least 150 lbs. to safely lower your load one notch at a time. When loaded with less than 150 lbs., the notches are bypassed and the load will drop freely.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Base | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max., tons | Range, lbs. | Max. Clamping Force, lbs. | Ht. | Max. Lift | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Handle Material | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1 1/4 | 150-2,500 | 750 | 4 1/2"-49 3/4" | 45 1/4" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 0000000 |
| 2 1/4 | 150-4,500 | 750 | 4 1/2"-38 5/8" | 34 1/8" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 000000 |
Rams for Hydraulic Jacks
Push or pry apart material with these rams by attaching them to a hydraulic pump. Use hose to connect the ram to a pump; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.
Style B-D rams lift or push material. Style B rams have a lower profile than Style C rams. Style D rams have an unthreaded hole through the center that can be used to create a pulling action. Run a threaded rod through the bottom of the ram and fasten or weld the rod to the material you are trying to pull. Often used to free stuck parts.
Rams with collar threads are threaded at the top of the ram for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks).
For technical drawings and 3-D models, click on a part number.
Capacity | Mounting | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | tons | lbs. | Ht. | Max. Lift | Ram Oil Capacity, cu. in. | Dia. | Lg. | Wd. | Ram Collar Thread Size | Ram Center Hole Dia. | Max. Pressure, psi | Pipe Size | Thread Type | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| B | 5 | 10,000 | 1 1/2"-1 3/4" | 1/4" | 0.2 | __ | 2 9/16" | 1 3/4" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/16" | 0000000 | 0000000 |
| B | 5 | 10,000 | 1 7/8"-2 1/2" | 5/8" | 0.6 | __ | 2 9/16" | 1 3/4" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/16" | 000000 | 000000 |
| B | 10 | 20,000 | 1 3/4"-2 1/8" | 3/8" | 0.9 | __ | 3 1/4" | 2 3/16" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| B | 20 | 40,000 | 2 1/8"-2 1/2" | 3/8" | 2 | __ | 4" | 3" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 000000 | 000000 |
| B | 30 | 60,000 | 2 3/8"-2 7/8" | 1/2" | 3.2 | __ | 4 1/2" | 3 3/4" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 000000 |
| B | 50 | 100,000 | 2 5/8"-3 1/4" | 5/8" | 6.9 | __ | 5 1/2" | 5" | __ | __ | 10,000 | 3/8 | NPTF | No | 2 | 7/16" | 0000000 | 000000 |
| C | 5 | 10,000 | 4 3/8"-5 1/2" | 1 1/8" | 0.9 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 000000 | 000000 |
| C | 5 | 10,000 | 6 5/8"-9 3/4" | 3 1/8" | 2.9 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 5 | 10,000 | 8 1/2"-13 5/8" | 5 1/8" | 5 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 5 | 10,000 | 10 3/4"-17 7/8" | 7 1/8" | 7 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 5 | 10,000 | 12 7/8"-22" | 9 1/8" | 9.1 | 1 1/2" | __ | __ | 1 1/2"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/4" | 0000000 | 000000 |
| C | 10 | 20,000 | 4 7/8"-7" | 2 1/8" | 4.1 | 2 1/4" | __ | __ | 2 1/4"-14 | __ | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 000000 |
| C | 10 | 20,000 | 9 3/4"-15 3/4" | 6" | 13.7 | 2 1/4" | __ | __ | 2 1/4"-14 | __ | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 000000 |
| C | 10 | 20,000 | 13 3/4"-23 3/4" | 10" | 22.7 | 2 1/4" | __ | __ | 2 1/4"-14 | __ | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 000000 |
| C | 15 | 30,000 | 10 3/4"-17 1/8" | 6 3/8" | 19 | 2 3/4" | __ | __ | 2 3/4"-16 | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 000000 |
| C | 25 | 50,000 | 10 3/4"-16 7/8" | 6 1/8" | 32.2 | 3 1/2" | __ | __ | 3 5/16"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 000000 |
| C | 25 | 50,000 | 18 3/4"-32 7/8" | 14 1/8" | 73.4 | 3 1/2" | __ | __ | 3 5/16"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
| C | 30 | 60,000 | 15 1/4"-23 1/2" | 8 1/4" | 53.6 | 4" | __ | __ | 3 5/16"-12 | __ | 10,000 | 3/8 | NPTF | __ | __ | __ | 000000 | 00000000 |
| C | 55 | 110,000 | 11 1/8"-17 1/4" | 6 1/8" | 69 | 5" | __ | __ | 5"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
| C | 100 | 200,000 | 14 1/8"-20 3/4" | 6 5/8" | 137 | 7" | __ | __ | 6 7/8"-12 | __ | 10,000 | 3/8 | NPTF | No | 2 | 3/4" | 000000 | 00000000 |
| D | 12 | 24,000 | 7 1/4"-10 1/4" | 3" | 8.3 | 2 3/4" | __ | __ | 2 3/4"-16 | 3/4" | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 000000 |
| D | 20 | 40,000 | 6 1/2"-8 1/2" | 2" | 9.4 | 3 7/8" | __ | __ | 3 7/8"-12 | 1" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 30 | 60,000 | 7 1/8"-9 5/8" | 2 1/2" | 18 | 4 1/2" | __ | __ | 4 1/2"-12 | 1 1/4" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 30 | 60,000 | 13"-19 1/8" | 6 1/8" | 44.2 | 4 1/2" | __ | __ | 4 1/2"-12 | 1 1/4" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 60 | 120,000 | 9 3/4"-12 3/4" | 3" | 38.2 | 6 1/4" | __ | __ | 6 1/4"-12 | 2 1/8" | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
Hydraulic Jacks
Lift in tight spaces where a bottle jack won't fit. Jacks include a ram, a hand pump with hydraulic oil, a pressure gauge, and a hydraulic hose. For vertical use, the pump head (where the handle meets the pump) must be pointed down.
Jacks with ram center hole have an unthreaded hole for attaching a threaded rod so you can use them in pulling applications.
Rams with collar threads are threaded at the top for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks).
Warning: Never use to support people or loads over people.
Capacity | Ram | Pump | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Max. Pressure, psi | OD | Center Hole Dia. | Collar Thread Size | Oil Capacity, cu. in. | Lg. | Wd. | Ht. | Oil Capacity, cu. in. | Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 5 | 10,000 | 1 5/8"-2 1/4" | 5/8" | 10,000 | 2 5/8" | __ | __ | 0.6 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 000000000 |
| 5 | 10,000 | 4 3/8"-5 1/2" | 1 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 1 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 6 5/8"-9 3/4" | 3 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 3 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 8 1/2"-13 1/2" | 5" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 5 | 13 1/4" | 3 3/4" | 5 5/8" | 20 | Aluminum | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 8 1/2"-13 5/8" | 5 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 5 | 14 1/4" | 5 1/8" | 5" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 10 3/4"-17 7/8" | 7 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 12.6 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 10 | 20,000 | 4 3/4"-6 7/8" | 2 1/8" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 4.8 | 21" | 4 3/4" | 7" | 55 | Aluminum | No | 2 | 1/4" | 0000000 | 00000000 |
| 10 | 20,000 | 4 7/8"-7" | 2 1/8" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 4.2 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 10 | 20,000 | 9 3/4"-15 3/4" | 6" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 13.7 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 10 | 20,000 | 9 3/4"-15 7/8" | 6 1/8" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 13.7 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
| 12 | 24,000 | 7 1/4"-10 1/4" | 3" | 10,000 | 2 3/4" | 3/4" | 2 3/4"-16 | 8.3 | 25 5/8" | 5 3/8" | 5 3/4" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 25 | 50,000 | 10 3/4"-16 7/8" | 6 1/8" | 10,000 | 3 1/2" | __ | 3 5/16"-12 | 32.2 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
| 25 | 50,000 | 10 3/4"-17" | 6 1/4" | 10,000 | 3 3/8" | __ | 3 5/16"-12 | 32.2 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
| 30 | 60,000 | 7 1/8"-9 5/8" | 2 1/2" | 10,000 | 4 1/2" | 1 1/4" | 4 1/2"-12 | 18 | 25 5/8" | 5 3/8" | 5 3/4" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 55 | 110,000 | 11 1/8"-17 1/4" | 6 1/8" | 10,000 | 5" | __ | 5"-12 | 69 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
| 100 | 200,000 | 5 5/8"-7 5/8" | 2" | 10,000 | 6 1/2" | __ | __ | 44.2 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
Hand-Operated Tall-Body Hydraulic Bottle Jacks
Save time pumping with jacks that are twice as tall as standard bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. Secure equipment to the ram through a mounting hole on the ram’s tip.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Features | Each | |
| 1 1/2 | 3,000 | 25 5/8"-43 5/8" | 18" | 7/8" | 4 1/2" | 5 7/8" | 20" | Steel | __ | __ | __ | Removable Handle | 0000000 | 0000000 |
| 3 | 6,000 | 20 3/8"-35 1/2" | 15 1/8" | 1 3/16" | 4 3/8" | 5 7/8" | 20" | Steel | No | 2 | 5/16" | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 20 1/8"-36 5/8" | 16 1/2" | 1 3/8" | 4 5/8" | 6 1/4" | 20" | Steel | No | 2 | 3/8" | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 30 7/8"-53 3/4" | 22 7/8" | 1 5/8" | 5 1/8" | 6 1/2" | 20" | Steel | __ | __ | __ | Removable Handle | 0000000 | 000000 |
Foot-Operated Tall-Body Hydraulic Bottle Jacks
Jacks are equipped with two foot pedals for hands-free use, one to raise the ram and another to lower it. Twice as tall as standard jacks, they save you time pumping. Use them for lifting, spreading, bending, pushing, and straightening.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.